AGI Security Camera CAHTDR811 MANUAL

680Z 
 
d104a_V1.0 
 
IR Dome Camera User Manual 
 
The product image may differ from the actual product. 
Please use this camera with a DVR which supports HD video recording. 
Please read the instructions thoroughly before using the product. 
 
 
C C
A A
U U
T T
I I
O O
N N
   
R R
I I
S S
K K
   
O O
F F
   
E E
L L
E E
C C
T T
R R
I I
C C
   
S S
H H
O O
C C
K K
   
 
  
C C
A A
U U
T T
I I
O O
N N
: :  
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.   
Only...

 
 
FEATURES 
1. 1/2.7” CMOS Sensor 
2. 1080P video output 
3. Low light sensitivity of 0.1 Lux / F1.8, 0Lux (IR LED ON)   
4. Day and night 24-hour surveillance with IR effective distance up to 15 meters 
PACKAGE CONTENT 
 IR camera  User manual  Wrench  Screws & wall plugs 
DIMENSIONS* 
 *Dimensional Tolerance: ± 5mm 
SPECIFICATIONS* 
Pick-up Element 1/ 2.7” CMOS image sensor 
Number of Pixels 1930(H) x 1088(V) 
Video Frame Rate 1080P@30fps / 1080P@25fps 
Min. Illumination 0.1 Lux / F1.8, 0 Lux (IR...

 
 
INSTALLATION 
Step1: Find the screw on the camera, and remove it with the supplied wrench.   
Then, remove the camera base as shown in Figure 1, and disassemble the camera to four parts as shown in Figure 2. 
 
Figure 1 Figure 2 
Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing the 
bracket and routing the cables (if necessary). 
Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and...

 
 
CONNECTION 
1. DC12V Input Terminal 
Connect the power terminal of the camera to a DC 12V regulated power supply. 
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power 
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this 
unit. 
2.  Video Output Connector (VIDEO OUT) 
Connect the camera video output to the video input of a DVR with 75Ω coaxial cable. 
NOTE: To ensure the camera has sufficient protection against moisture, an...

 
  When the camera menu is entered, you’ll see the keys on the bottom right corner to 
move between and change those configurations. 
 Move between selections or change settings. 
 Enter the currently-selected item. 
X Quit the camera parameters mode. 
 
 
MENU   DESCRIPTION 
DAY / NIGHT  MODE  EXT / COLOR / B&W / AUTO  Set the day & night mode among EXT, COLOR, B & 
W, and AUTO. 
  D TO N  1 ~ 63  Set the sensitivity for the day & night mode from day 
to night. 
  N TO D  1 ~ 63  Set the...

 
 
 
MENU   DESCRIPTION 
SYSTEM  CAMERA ID  0 ~ 255  Set the camera ID. 
  ID DISP.  OFF / ON  Enable or disable the display of the camera ID. 
  NAME DISP.  OFF / ON  Enable or disable the display of the camera name. 
 LANGUAGE ENG / 中文  Select the language of the menu: English / Simplified 
Chinese. 
  FACTORY INIT  OFF / ON  Enable to restore the camera parameters to factory 
default values.