AGI Security Central Management System CAABL357 NetworkArchitecture User Manual

							System Network Architecture 
For different size of system scale, you may consider different 
implements, and we divided them into 3 groups. The following 
architecture recommendations shows how to connect all devices 
together in a system. 
 
a. 16 channels and below; 
b. 16~64 channels; 
c. above 64 channels 
 
 
 
Note:  
1. All ip cameras and NVR’s Lan port should be connected to a 
mega switch or AVX913R6 to connect. See as Case 1 and 2 
above. 
2. NVR’s Wan port and PC(CMS work station)should be connected to 
a Giga switch.  
 
  
						

							 
 
Note:  
1. All ip cameras and NVR’s Lan port should be connected to one 
Giga switch, and if you use AVX913R6, please connect each 
AVX913R6 to the Giga switch directly. 
2. NVR’s Wan port and PC(CMS work station)should be connected to 
a Giga switch. 
 
   
						

							 
 
Note: 
1. All ip cameras and NVR’s Lan port should be connected to one 
Giga switch, and if there are more than one switch in LAN, please 
use Giga switch which has turcking functions. 
2. NVR’s Wan port and PC(CMS work station)should be connected to 
a Giga switch. 
3. Please find AVTECH Presales to support system planning over 96 
channels.