AGI Security System SYS16A903 How to wire ptz camera to AVTech User Manual

							How to wire a PTZ camera to your AVTech DVR 
 
1 
 
 
How to wire a PTZ camera to your AVTech DVR 
For Model(s): VC-SYS-4WEBMVPB/VC-SYS-8WEBMVPB/VC-SYS-16WEBMVPB 
V 1.1 
By AGI Security Technical Department       
To connect your PTZ camera(s) to your AVTech dvr, you must locate the External I/O port on the back of the DVR. 
See Figure 1. 
 
 
Figure 1 (Example of a 4 CH DVR) 
 
Use the following diagram to connect your PTZ camera wires. Note. It’s suggested you use a DSUB 9 (for 4 CH) or 
DSUB 25 (for 8 and 16 CH) pin connector to hook up your PTZ wire. The DSUB 9 connector is not included with the 
4 CH DVR. 
 
 
 
  
						

							How to wire a PTZ camera to your AVTech DVR 
 
2 
 
 
 
 
 
Diagram for an 4 CH DVR 
 
Diagram for an 8 and 16 CH DVR