Aimco Brakes ADW Series Torque Wrench Users Guide

							1-5  Edit Limits
High or Low edits that limit.
Limit editing:   
Up and Down: Change the digit specified (5 is decimal point, OFF turns the limit 
off)  
DIG: Changes which digit to edit.  
ENT: Accepts changes.  
2  SYSTEM MENU 
SEL: Enters menu. 
2-1  Sleep
+,  -: Set time in minutes.
To conserve battery life, the display is equipped with a sleep mode, which sets 
the limit to standby after a user -settable amount of time has passed without activity. 
Press the + key to increase the number of minutes the unit will wait for input, or the  - key 
to decrease the number. The highest possible sleep setting is 20 minutes.   
2

- 2  Lockout Menu
SEL: Enter menu.
2-2-1  Mode Lockout
+,  -: Toggle on or off.
2

-2-2  Units Lockout
+, -: Toggle on or off.
2

-2-3  Scroll Lockout
+,  -: Toggle on or  off.
2

-3  Contrast
+,  -: Change the contrast of the display.
2

-4  Information
SYS: Gives detailed info about the system.
TD: Gives detailed info about the transducer.  
Menu Options 11 
Auditor Digital Wrench   
						

							3
  DATA MENU  
SEL: Enters menu.  
3

-1  Print Memory
Send: Prints the currently saved readings.
Memory note: The Auditor Wrench can be equipped with either a flat memory 
with 1000 memory locations, or ‘Sets’ memory where a common group of 
readings have an identifier field.  
3

-2  Clear Memory
CLR: Foll owed by ENT clears the readings saved in memory.
3

-3  Reset All
CLR: Followed by ENT clears all readings and all sets. Should be used
approximately every 5000 readings.  
Menu Options 12 
Auditor Digital Wrench   
						

							SERVICE AND WARRANT Y 
SERVICE 
To ensure the best possible support for our customers  AIMCO  maintains a complete calibration and 
repair facility for all its products.  We keep in stock most replacement parts for torque testers, 
transducers, and our line of digital wrenches.  When you buy a product from us, the only place you 
need to go for parts and service is...us!  For service  503 254 6600, Monday through Friday, between 
the hours of 9:00am and 5:00pm Pacific Coast Time. 
THE WARRANTY CARD  
In order to ensure protection of the warranty as described below, you MUST fill in the appropriate 
information on the warranty card that came with your unit and return it to  AIMCO. within 30 days of 
receipt of item.  
W

e wish to call your attention to the fact that this system and various components need calibration 
and certification on a periodic basis.  By returning the card to us, you will receive timely notification 
as to when this re -calibration and re -certification is due.  
STATEMENT OF LIMITED WARRANTY  
AIMCO products are warranted free of defects in material an d workmanship for a period of one (1) 
year from date of shipment.  This warranty does not include failures due to application of torque to 
transducers or loaders beyond the stated capacity, operating system with a damaged transducer 
cord, nor any other misuse, abuse, or tampering.  When used with impact type wrenches, the 
warranty is limited to the electronic digital display units only.  This warranty does not cover 
calibrations.  
A

ll freight charges are the responsibility of the company or individual returning the item(s) for repair. 
Freight collect shipments will not be accepted. 
A

ny modification to any of this equipment, without the express written approval of  AIMCO will void 
this warranty.  AIMCO disclaims any and all liability, obligation or responsibility for the modified 
product; and any claims, demands or causes of action for damage or for personal injuries resulting 
from the modification and/or use of such a modified AIMCO   product. 
A

IMCO S OBLIGATION WITH RESPECT TO ITS PRODUCTS SHALL BE LIMITED TO REPAIR OR 
REPLACEMENT, AND IN NO EVENT, SHALL AIMCO  BE LIABLE FOR ANY LOSS OR DAMAGE, 
CONSEQUENTIAL OR SPECIAL, OF WHATEVER KIND OR NATURE OR ANY OTHER EXPENSE WHICH 
MAY ARISE IN CONNECTION WITH OR AS A RESULT OF SUCH PRODUCTS OR THE USE OR 
INFO RMATION THEREOF IN A JOB.  THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER 
WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  NO EXPRESS 
WARRANTIES AND NO IMPLIED WARRANTIES WHETHER OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE OR OTHERWISE OTHER THAN THOSE EXPRESSLY SET FORTH ABOVE SHALL 
APPLY TO AIMCO.
Service and Warranty 13 
Auditor Digital Wrench    
						

							
Notes: 
Auditor Digital Wrench 
  
						

							
Notes: 
Auditor Digital Wrench 
  
						

							AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street 
Portland, Oregon  97216  
Phone: (503) 254– 6600 
Toll Free: 1 -800- 852-1368  
A

IMCO CHINA  
Room 607, No. 3998 Hongxin Rd Dibao Plaza  
Minhang District, Shanghai   
China  
Phone: 0086 -21- 34319246  
Fax: 0086- 21-34319245
  LIT-M
A
N960      Rev. 03/2016  
Printed in USA  ©2016 AIMCO AIMCO C
ORPORATION D E
 MEXICO S A DE CV 
Ave. C ristobal C olon 14529 
Chihuahua, C hihuahua.  31125 
Mexico 
P
hone: ( 01-614) 380- 1010 
Fax: (01 -614) 380- 1019 
AIMCO S PAIN 
Avenida R ío Gallo, 4 31 
19174 Galápagos - Guadalajara 
Spain 
P
hone: + 34 673 34 99 25