Aimco Brakes AHCTS Series Continuous Rotation Torque Tool Test Stands User Guide

 
  Programming and Navigation 10 
AHCTS Series User’s Guide 
 
2-3  Contrast 
+, -: Change the contrast of the display. 
 
 
2-4  Information 
SYS: Gives detailed information about the system. 
TD: Gives detailed information about the transducer. 
 
 
3  DATA MENU 
SEL: Enters menu. 
 
3-1  Print Memory 
Send: Prints the currently saved readings. 
 
3-2  Clear Memory 
CLR: Followed by ENT clears the readings saved in memory. 
 
3-3  Reset All 
CLR: Followed by ENT clears all readings and all sets....

 
 
AHCTS Series User’s Guide 
 RUNDOWN FIXTURE 11 
 
RUNDOWN FIXTURE MAINTENANCE 
The test stands require very little maintenance; however, periodic lubrication of the 
rundown fixture is critical to the longevity of the tool and repeatability of tool testing. The 
rundown bolt and washers should be periodically removed and inspected, and if 
necessary, coated with a high pressure anti-seize lubricant.   
We recommend McMaster Carr part number 1028K65 Standard Nickel Antiseize 
Lubricant.  After...

 
 
AHCTS Series User’s Guide 
 DESCRIPTION OF FUNCTIONS 12 
DESCRIPTION OF FUNCTIONS 
The following is a description of the standard features of the Auditor product line. 
 
OPERATING MODES 
Peak, 1st Peak or Track will show on the display.  Press the Πkey to toggle them. 
 
Peak 
Recommended operating mode for stall tools. 
Displays and retains the maximum torque exerted by the tool, as occurs when operating 
the wrench in the tightening direction.  The Peak Mode is used for all power tools and dial...

 
 
AHCTS Series User’s Guide 
 DESCRIPTION OF FUNCTIONS 13 
When all the digits have been set, press the MEM key to accept the value and return to 
Program Function mode.  Upon the next reading, LO will appear on the display if the 
captured value is less than the low limit 
 
 
HIGH LIMIT 
Use the high limit setting to visually flag the operator when a reading falls over a desired 
maximum value. High limits are set in the identical way as low limits. Please refer to the 
Low Limit section for details....

 
                                                                                                                      
  ADDITIONAL PRODUCT OPTIONS 14 
AHCTS Series User’s Guide 
 
ADDITIONAL PRODUCT OPTIONS: 
 
   
 
Auditor ATDA          Auditor ATDA-DC 
 
 
 
Auditor ATDA-8000 
 
AHCTS with Articulating Arm for 
above displays 
At left is an image of the possible 
configurations of AHCTS and AHCTS-K 
test stands.  Image illustrates various 
sizes, various reaction devices and 
illustration of rotary...

AIMCO LIMITED WARRANTY 15 
AHCTS Series User’s Guide 
NEW TOOL AND ACCESSORY WARRANTY 
An

y new tool or accessory branded with the AIMCO, Uryu,  AcraDyne or Eagle Industries name, and  purchased from 
AIMCO, or through one of its authorized distributors or agents , is warranted to the original buyer against defects in 
materials and workmanship for a period of one (1) year* from  date of delivery. Under the terms of this warranty, 
AIMCO will repair or replace any product or accessory warranted...

Notes: 
AHCTS Series User’s Guide
  

Notes: 
AHCTS Series User’s Guide
  

AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street 
Portland, Oregon  97216  
Phone: (503) 254– 6600 
Toll Free: 1 -800- 852-1368  
AIMCO

 CHINA  
Room 607, No. 3998 Hongxin Rd Dibao Plaza  
Minhang District, Shanghai   
China  
Phone: 0086 -21- 34319246  
Fax: 0086- 21-34319245
  LIT-MA
N970      Rev. 03/2016  
Printed in USA  ©2016 AIMCO AIMCO C
ORPORATION D E
 MEXICO S A DE CV 
Ave. C ristobal C olon 14529 
Chihuahua, C hihuahua.  31125 
Mexico 
P
hone: ( 01-614) 380- 1010 
Fax: (01 -614) 380- 1019...