Aimco Brakes Monitor UTM1500 Software Manual

							PO Box \b6460, Portland OR 972920460 • 8008\f2\b368 • Fax 800\f8290\b\fwww.aimcoglobal.com
Tightening Number Managing Controller
UTM – \b\f00
Setting Software Instruction Manual
(Setting Software V\b.4)
(Main Unit Software V\b.04) 
						

							
. 
						

							 1
 
 
Contents 
 
 
 
Screen Layout ................................................................................................................................................................................................................ 2 
Main Menu Screen......................................................................................................................................................................................................... 3 
File Selection Screen ..................................................................................................................................................................................................... 4 
Setting Screen................................................................................................................................................................................................................ 5 
Final Data Reception ..................................................................................................................................................................................................... 6 
Pressure Value Display Screen ..................................................................................................................................................................................... 7 
Waveform Data Reception............................................................................................................................................................................................. 8 
Statistics ........................................................................................................................................................................................................................ 9 
Statistical Chart ............................................................................................................................9 
Statistical Graph ...........................................................................................................................9 
Data.............................................................................................................................................. 10 
Input/Output Check .................................................................................................................................................................................................... 11 
Tool Management ........................................................................................................................................................................................................ 12 
Communication Rate.................................................................................................................... 13 
Reception Setting.......................................................................................................................... 13  
						

							2
Screen Layout 
Menu Screen File Selection 
Setting 
Final Data Reception 
Pressure Value Display 
Waveform Data 
Statistics 
Input/Output Check 
Environment Setting 
Finish 
Tool Management 
Statistical Data 
Statistical Graph  
						

							 3
 
Main Menu Screen 
This screen allows screen selection. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
（１） When   is selected, “File Selection” screen will appear. 
（２） When 
  is selected, “Setting Menu” screen will appear. 
（３） When 
  is selected, “Final Data Reception” screen will appear. 
（４） When 
  is selected, “Pressure Value Display” screen will appear. 
（５） When 
  is selected, “Waveform Data Reception” screen will appear. 
（６） When 
  is selected, “Statistics” screen will appear. 
（７） When 
  is selected, “Input /Output Check” screen will appear. 
（８） When 
  is selected, “Tool Management” screen will appear. 
（９） When 
  is selected, “Environment Setting” screen will be displayed. 
（１０） When 
  is selected, the pop-up screen on the right will 
be displayed.  Selecting 
  will finish the 
software, while selecting 
  will cancel finish 
option.
 
 
 
 
  
						

							4
File Selection Screen 
・Fil

e Selection will appear first at the start of the software.
（１）Select to create a new file, and click OK after typing in File Name” and “Tool/Work Name”. 
（２）Selecting
  while putting the cursor on  a file to be deleted will 
call up the pop-up window shown on the right.  Select 
  to delete the selected file. 
（３）Select
  to change “Tool/Work Name”. 
（４）Selecting
 enables File Selection screen printout. To 
start printing, select 
  on the screen shown on the 
right.  
（５）Select
  to save setting values on a floppy disk or other memory 
device.  Touch 
  while putting the cursor on a file to be saved 
and specify the intended save pl ace using the folder list window. 
（６） Select 
 to import setting values from a floppy disk or other
memory device upon specifying the import source using the folder list
window.
（７） Touch
  to return to Main menu. 
（８）
File Selection will appear first  at the start of the software. 
						

							 5
 
Setting Screen 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
・”F.6 Save” selection allows setting value saving.  Terminating the software or selecting another file 
es. 
 
 
 
Clicking a 
numerical setting 
column calls up 
Set Range 
Window.  Input 
any value 
directly according 
to the range. 
For non-numerical 
setting, select any 
one from the menu 
upon right-clicking 
your mouse.  
						

							6
Final Data Reception 
Automatic Saving 
・Checking “Auto Save” allows “data save place” and “file name” selection.
・Select between “Update on Time” and “Update on Size”.
・Input time interval when “Update on Time” is selected.    Date will be updated at input time intervals.
・ Input size when “Update on Si ze” is selected.    Data will be updated ev ery time when the input size is attained.
Receiving Item Selection
・Right-click your mouse to call up the pertaining menu,
and check any item to display.
・ Items without a checkmark  will not appear but the
corresponding data is in storage.
・To print out data received, select “ Ｆ.5 Print”.
・To save data received, select “F.6 Save”.
・To receive data, select “F.8 Receive”.
  will turn to  under receiving conditions to halt communication.  Data reception is effective 
continuously when returned to Main  menu without halting communication. 
・To return to Main menu, select “F.12 Main Menu”.
PC’s date and time is shown as no date and 
time is available at Controller’s side. 
Data No. received  
						

							 7  
Pressure Value Display Screen 
 
 
 
 
 
 
 
 
 
 
 
 
 
・This screen displays pressure values in real time. 
・Zero point correction will be effected when “F.6 Zero Correction” is selected.   If correction is 
effected at the time of 0.02V, pressure value after this operation will always take 0.00 [Mpa] 
at 0.02V. 
 
 
 
 
 
 
 
 
 
 
 
  
						

							8
Waveform Data Reception 
・Waveform data will be displayed with the time axis enlarged, when “F.1 Enlarge” is turned on.
・Waveform data will be displayed with the time ax is reduced, when “F.2 Reduce” is turned on.
・Select “F.5 Print” to produce printout s of waveform data now on display.
・To save data received, select  “F.6 Save”.    (CSV format)
・Selecting “F.7 Import” will allow importin g of previously received and saved data.
・To receive waveform data, select “F.8 Receive”.
・
will turn to  during receiving conditions to halt data reception. 
・Data reception is effective continuously when return ed to Main menu without halting data reception.
Preset Pressure Value Change
・ When “F.9 Pressure Setting” is selected, setting values  of Tightening Start Pressure and Shutoff (Hitting Start
in the case of TM or Standard Tool) can be changed.    “F.9 Setting Save” will turn on during changing.
・ Upon pressure changing, setting values  are saved with “F.9 Setting Save” and setting values are transmitted to 
Controller with “F.4 Setting Send”. 
・Returning to Menu without saving will  resume PC’s previous setting values.
・When “F.10 Display Clear” is selected, waveform data display will be cleared.
・To return to Main Menu, select “F.12 Main Menu”.