Aimco Brakes Nutrunner FSeries Spindle Unit Manual

 
 
 
 
 
 
F-TYPE NUTRUNNER SYSTEM 
 
 
SPINDLE UNIT 
 
UEC-F024, UEC-F040, F120 
 
INSTRUCTION MANUAL 
 
 
 
 
2.1 EDITION 2002 OCTOBER 
 
 
 
URYU SEISAKU, LTD. 
  

Revision History 
Print date Instruction manual number Contents of revision 
   
   
   
   
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

========================CONTENTS=========================== 
 
Chapter 1    Outline 
1-1  How to use this instruction manual      ……………………… 3 
1-2 Summary of functions    ……………………… 4 
1-3 Instructions for operation    ……………………… 5 
 
Chapter 2    Specifications 
2-1 Main specifications    ……………………… 7 
2-1-1  Duty calculation     ……………………… 7 
2-1-2  Spindle unit specifications      ……………………… 7 
2-2 Capacity      ……………………….8 
2-2-1 Nutrunner    ……………………… 8 
2-2-2 Spindle unit    ……………………… 9 
2-3 Functions...

========================CONTENTS=========================== 
 
Chapter 5    Switching ON and trial operation 
5-1  Confirmation points prior to switching on    ………………………31 
5-2 Initial setting data input    ………………………32 
 
Chapter 6    Operation 
Operation      ………………………33 
6-1  Display and operation part functions     ………………………34 
6-2 RUN status operation    ………………………36 
 6-2-1 Display     ………………………36 
 6-2-2 Mode change    ………………………37 
  6-2-3  Key operation under RUN status    ………………………38 
6-3  BYPASS...

==========================================Chapter 1=========== 
 
Chapter 1 Outline 
 
1-1  How to use this instruction manual
 
This instruction manual will tell you system structure, specifications and the handling etc of 
F-type nutrunner spindle unit but is not for  F-type nutrunner main unit.  (Refer  to  F-type 
nutrunner system main unit instruction manual.) 
 
  This instruction manual is c onsisting of the following order. 
 
Chapter Title Contents 
   1 Outline F-type nutrunner spindle unit...

======Chapter 1=============================================== 
 
1-2  Summary of functions
F-type nutrunner system is the multi-spi ndle nutrunner system which we developed for 
easy operation of all ti ghtening applications. 
 
 Compact design
Small and compact, only 60mm width (F024) spindle unit despite both power unit 
and servo amplifier built-in design, that  has been brought due to employment of 
transister-less and miniturize technology.  Our rear side mounting method 
adoption has eliminated...

==========================================Chapter 1=========== 
1-3  Instructions for opeation 
 
Follow the below-metioned instructions in order to use F-type nutrunner system under the 
best conditions. 
Assembly 
When tightening tools generate strong trque,  whose equivalent force is given to 
tools’ fixing part.  For fixing tools, theref ore, fix tools to the specified place by 
specified screws.  Do not give tools st rong vibration or excessive force since 
tools are consisting of mechanical parts...

======Chapter 1=============================================== 
 
Counter-measures to noise
Do not put electromagnetic switching devic e close to spindle unit in the dust free 
control box because spindle unit is consis ting of electronic components.    Use and 
connect noise removers such as surge-dumpe rs in case you put electric relay or 
electromagnetic switching device in the dust free control box.    Separate spindle 
unit and tool connecting cable fr om power cable in order to avoid consolidation...

==========================================Chapter 2=========== 
Chapter 2  Specifications 
2-1 Main specifications 
 Power voltage   3-phase AC200~220V  ±10% 50/60Hz 
Operation environment Mount spindle unit in the dust free control box.   
Provide spindle unit with compulsory cooling 
equipment or heating equi pment in case the 
environment is out of the following 
environment. 
  Operation temperature range  0-45 ℃  and no dew 
  Operation humidity range  less than 90% and no dew 
Operation capacity...

======Chapter 2=============================================== 
2-2 Capacity 
2-2-1 Nutrunner
Torque accuracy        from 1/2 to the max. output: 3 σ/X less than 3%     
from 1/4 to 1/2 of max. output: 3 σ/X less than 4% 
(as per our tightening standard) 
 Minimum angle display   0.1 ° 
  Minimum control angles    0.1° 
  Torque sensor accuracy (full scale) ±1% 
  Torque sensor linearity      ±0.5% 
 Torque・running speed 
Standard tool type Max. Torque Max. Speed Spindle unit 
UNR-F015-45          4.5Nm...