Aiphone AXWAVTR Instructions User Manual

- INSTRUCTIONS -
The AXW-AVT and AXW-AVR are designed to allow connection of a standard AX-series audio video door 
station (or audio-only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3rdparty 
transmission equipment (fiber optics, Ethernet, etc.) and converting it back via the AXW-AVR to a signal 
compatible with the AX-series exchange unit. External video input/output is provided at both adaptors to 
allow 3
rdparty camera input, output to recording devices, etc.  A...

AXW-AVR
Pg. 2
OFF   ON
CEU
OUT IN
VIDEO
AXW-AVR
AUDIO
+     -
IN OUT
+     -
RELAY
NO  NOOUT
+     -
CALL
+     -
IN
75 OHM
COMPATIBLE DOOR STATIONS (AXW-AVT):
AX-DV Surface mount, die cast zinc, vandal resistant, Audio-Video
AX-DVF Flush mount, stainless steel, vandal resistant, Audio-Video
AX-DM Mullion mount, black plastic, Audio Only
IF-DA Surface mount, brown plastic, Audio Only
IE-DC Surface mount, brown plastic w/aluminum, Audio Only
IE-JA Flush mount, 2 gang, stainless steel faceplate, Audio...

CT1AT2
AT1 DT2 DT1 CR2 CR1AR2 AR1 DR2 DR1VIDSYNRX C/ETX C/LDIAGPWR
VIDEO OPTICALTX RX
CT2
1
3
5
1
4
1
3
5
DATA C.C. AUDIO
CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-AiphoneAX1-XS), 1 of 2CCTV Camera
75 Ohm, 1V Peak-to-peak
(Independently powered)
Normally Closed input for remote activation
(i.e. motion sensor, loop detector, etc.)Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
Configuration Notes (1 of 2):
1.  AX-series video door...

CEU
AUDIO IN
+
-
AUDIO OUT
+
-
CALL IN
+
-
CALL OUT
+
-
RELAY
NO
NO
VIDEO IN
VIDEO OUT
AXW-AVR
To AX-CEU
(Door Input)
CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-AiphoneAX1-XS), 2 of 2Pg. 5Pg. 6
Optic Fiber
(to ST-AiphoneAX1-XS, Pg. 4)
Coaxial Video Cable
Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
Composite Video Output*
(for CCTV monitor, DVR, etc.)
Configuration Notes (2 of 2):
1.  Connect the AXW-AVR ‘CEU’ connection to an...

CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with Infinova Fiber (N3732TA-M/-R, N3732RA-M/-R), 1 of 2Pg. 7Pg. 8CCTV Camera
75 Ohm, 1V Peak-to-peak
(Independently powered)
Normally Closed input for remote activation
(i.e. motion sensor, loop detector, etc.)Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
AXW-AVT
24V
+
-
RELAY
NO
NO
SENSOR
NC
NC
CALL IN
+
-
CALL OUT
+
-
AUDIO IN
+
-
AUDIO OUT
+
-
DOOR
VIDEO IN
VIDEO OUT
AX-DVAX-DM or IE/IF-Series 
Audio Door Station...

CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with Infinova Fiber (N3732TA-M/-R, N3732RA-M/-R), 2 of 2Pg. 9Pg. 10
CEU
AUDIO IN
+
-
AUDIO OUT
+
-
CALL IN
+
-
CALL OUT
+
-
RELAY
NO
NO
VIDEO IN
VIDEO OUT
AXW-AVR
To AX-CEU
(Door Input)
Coaxial Video Cable
Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
Composite Video Output
(for CCTV monitor, DVR, etc.)
Configuration Notes (2 of 2):
1.  Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and...

CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with AFI (American Fibertek) Fiber (MT/MR-89A-AX), 1 of 2Pg. 11Pg. 12CCTV Camera
75 Ohm, 1V Peak-to-peak
(Independently powered)
Normally Closed input for remote activation
(i.e. motion sensor, loop detector, etc.)Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
AXW-AVT
24V
+
-
RELAY
NO
NO
SENSOR
NC
NC
CALL IN
+
-
CALL OUT
+
-
AUDIO IN
+
-
AUDIO OUT
+
-
DOOR
VIDEO IN
VIDEO OUT
AX-DVAX-DM or IE/IF-Series 
Audio Door Station...

CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with AFI (American Fibertek) Fiber (MT/MR-89A-AX), 2 of 2Pg. 13Pg. 14
CEU
AUDIO IN
+
-
AUDIO OUT
+
-
CALL IN
+
-
CALL OUT
+
-
RELAY
NO
NO
VIDEO IN
VIDEO OUT
AXW-AVR
To AX-CEU
(Door Input)
Coaxial Video Cable
Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
Composite Video Output
(for CCTV monitor, DVR, etc.)
Configuration Notes (2 of 2):
1.  Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to...

V1
A+  A- GND  A+  A- GNDAUDIO 1  AUDIO 2 C1     C2      C3       C4
CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with KBC Networks (FPVB1-AB1-IB2-ST, FPVB1-AB1-IB2-SR), 1 of 2Pg. 15Pg. 16
Please Note:
Only information pertaining to the connection and operation of the AXW-AVT / AXW-AVR and listed 3
rdparty devices interfacing with it are included here. Aiphone is not 
responsible for attempts to connect the AXW-AVT / AXW-AVR to untested 3
rdparty transmission hardware. Consult the installation manual for...

V1
A+  A- GND  A+  A- GNDAUDIO 1  AUDIO 2 C1     C2      C3       C4
CONFIGURATION DIAGRAM:  
AXW-AVT / AXW-AVR with KBC Networks (FPVB1-AB1-IB2-ST, FPVB1-AB1-IB2-SR), 1 of 2Pg. 17Pg. 18
To AX-CEU
(Door Release Output)
Normally Open contact for remote device activation 
(i.e. video switcher, DVR, etc.)
Composite Video Output
(for CCTV monitor, DVR, etc.)
Configuration Notes (2 of 2):
1.  Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the terminal block of the 
AFI...