Aiphone AXWAZ Instructions User Manual

							Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA  98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:1-800-692-0200
E-mail [email protected]. 3
JAW-AZ Instr. 0308JDJS
Note:
Only information pertaining to the connection and operation of the AXW-AZ and devices interfacing with it are included here. 
For complete installation
, wiring, and programming information regarding the AX system, pl ease refer to the AX Installation 
Manual, which is included on the CD provided with the AX CEU. 
NOTE: This equipment has been tested and found to comply with  the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection ag ainst harmful interference in a residential installation. This equ ipment generates, 
uses, and can radiate radio frequenc y energy and, if not installed and used in ac cordance with the instructions, may cause harm ful interference to 
radio communications.  Howe ver, there is no guarantee that in terference will not occur in a particular installation.  If this e quipment does cause 
harmful interference to radio or television reception, which can be determined by turn ing the equipment off and on, the user is encouraged to try 
and correct the interference by one or more of the following measures:
— Reorient or locate the receiving antenna.
— Increase the separa tion between the equipment and receiver.
— Connect the equipment into an outle t on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experien ced radio/TV technician for help.
FCC Class B Verification
SPECIFICATIONS:
Power: Supplied by AX CEU
Video Input & Output: Composit e 1V Peak-to-Peak, NTSC
Connector: BNC 
Audio Door input: Use AX-DM or any  IE/IF-Series Audio Door Station
Relay: Normally Open cont act output, 24V DC, 1A
Sensor: Normally Closed contact input
Wire: CAT-5e, 24AWG UTP-4
Wiring distance w/  Door: Max. 980 from AX-DM /  IE/IF-series door to AX CEU 
(through AXW-AZ)
Wiring distance w/o D oor: Max 980 from AXW-AZ to AX CEU
Dimensions: 1-5/8H x 7W x 4D
PROGRAMMING:
1.  Follow standard AX programming procedures as 
described in the AX Installation & Operation 
manual (included on CD with the AX CEU).
2.  When configuring door stations, be sure to set the  station number corresponding to the AXW-AZ to 
“Video” in the AX setup utility.
OPERATIONS:
1.  The AXW-AZ will  function as a standard AX -series video door station, and can utilize all door 
station associated capabi lities (i.e. Scan Monitor, Door Releas e, Priority Call Settings, etc).
2.  If the SENSOR  input is utilized, the AXW-AZ  will generate a typical door station call  indication at 
the associated master stat ions. The priority level will be  as chosen in the AX setup utility.
Typical configuration selection