Home > Aiphone > Telephone > Aiphone IPW1A Instructions User Manual

Aiphone IPW1A Instructions User Manual

Add to Favourites
    Download as PDF

    View the Aiphone IPW1A Instructions User Manual for free. All the Aiphone manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 - INSTRUCTIONS - The IPW-1A offers voice-quality Intercom function over standard IP based networks. Designed specifically to integrate seamlessly into a new or existing LAN / WAN infrastructure, the IPW-1A system is capable of supporting hundreds of stations. Providing intercom/paging solutions to a large variety of applications including commercial, industrial, residential, general security, office, and institutional. IPW-1A Intercom-Over-IP Adaptor Pg. 1 1 NAMES & FEATURES FEATURES: ·...
    Page 2 2 INSTALLATION & MOUNTING Installation Instructions: 1.If the IPW-1A adaptor is not on the same LAN or network segment as the PC master station, ensure that the IPW-1A has been pre-programmed with the proper connection settings prior to physical adaptor installation. See the CommuniCenter Operations manual (included on CD with IPW-1A). 2.Wire the sub station to the proper connector on the IPW-1A, and connect to the network using the standard RJ-45 jack. Wiring from the sub station to the IPW-1A...
    Page 3 Pg. 3 4 STATION SET-UP DHCP Enabled: · An IP address will automatically be assigned to each IPW-1A with the default ID# as 0 and Location Name left blank. · Right click on each station to open the drop down box, and select Settings. This will open the Hardware Configuration tool. Give each adaptor a unique ID# along with a unique Location Name. · It is recommended that a password be set for each adaptor. This password can be the same for all adaptors in the LAN if you wish. To set the password, right...
    Page 4 Device running / normal operation: · During normal operation, the Green LED will remain on while the Red LED will remain off. Pushing the reset button: · Upon pressing the reset button, the Green LED and Red LED will remain on. If the reset button is held for 10 seconds or more, the Green LED will remain lit and the Red LED will blink, resetting the unit to factory defaults. Ethernet jack LED status Yellow:link is established Green:connected to 10Mbit network Orange: connected to 100Mbit network 6...
    Start reading Aiphone IPW1A Instructions User Manual

    Related Manuals for Aiphone IPW1A Instructions User Manual

    All Aiphone manuals