AIPTEK Pocketcinema V50 Users Manual

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 11 
EN 
General Settings 
On the main menu screen, select the Setting item and press the OK button. You will see 
the Setting screen as below. 
 
 
 
● Language: This item allows users to select the displayed system language. 
● Keypad Sensitivity: This item allows users to set the key sensitivity (available setting 
value is 1~5). The higher value indicates higher sensitivity. 
● Auto Off: This item allows users to enable or disable the auto power off function of the 
system. If auto power off is off, the projector will be continuously on. It’s not 
recommend to use this setting in battery mode. 
● Default: The item allows users to restore to the factory default settings. 
● Lumens: This item allows users to change the lumens mode by selecting as Eco 
Mode or Enhanced Mode. In Eco mode the lumens in lower but also the power 
consumption decrease (suggest for battery mode) 
● Volume Control: This item allows users to select audio output device as for Earphone 
or for Speaker. 
● Information: This item displays the system information, including the 
firmware/hardware version and available space of internal memory/SD card. It’s also 
possible to performance a firmware update from here. For latest firmware please visit 
Aiptek website and follow the instructions in the update SOP provide with the firmware 
file. 
 
To configure the setting: 
1.  Select the item and press the OK button to display the available setting options of the 
item. 
2.  Select the desired option and press the OK button. The setting will be saved 
automatically. 
3.  To discard the setting, simply press the Return (
) button. You will return to the 
previous screen without changing the setting. 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 12 
EN 
General Operation 
Playing Video 
1.  On the Main menu, select the Video item and press the OK button to enter the Video 
screen. 
 Do one of the following: 
● Press the OK button to start playing the video. Press OK button again to pause 
the video. 
● Press the Left/Right (◄/►) button to jump to the previous/next file. 
● Press and hold the Left/Right (◄/►) button to Fast Rewind/Fast Forward. 
● Press the Up/Down (▲/▼) button to increase/decrease the volume. 
2. Press the Menu (M) button to bring up the Video settings screen. 
  On the Video settings screen, you can: 
● Press the Left/Right (◄/►) button to move to previous/next setting menu; when 
selected, press the UP/Down (▲/▼) button to move to the setting item of the 
menu. 
● Press the OK button to confirm the setting. 
● Press the Return () to back to the previous menu. 
3.  In the Video settings screen, you can set up the following options: 
Setting menu  Setting item  Description 
On Enable the sound during video playback. Vo l u m e  
Off Disable the sound during video playback. 
Normal Play the video clips in order. 
Repeat One Repeat the selected video clip. 
Repeat All Repeat playing all the video clips in the folder. Repeat 
Random Play the video clips in the folder randomly. 
Brightness Set the brightness level (1 ~ 5) of projection 
screen. 
Contrast Set the contrast level (1 ~ 5) of projection screen. Color Setting 
Saturation Set the saturation level (1 ~ 5) of projection 
screen. 
Yes Select to confirm to delete the selected file. 
Delete 
No Select to return to the previous menu without 
deleting the selected file. 
Exit Exit Exit the Video settings screen. 
   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 13 
EN 
Playing Music 
1.  On the Main menu, select the Music item and press the OK button to enter the Music 
screen. 
  Do one of the following: 
● Press the OK button to start playing the music track. Press OK button again to 
pause the track. 
● Press the Left/Right (◄/►) button to jump to the previous/next file. 
● Press and hold the Left/Right (◄/►) button to Fast Rewind/Fast Forward. 
● Press the Up/Down (▲/▼) button to increase/decrease the volume. 
2. Press the Menu (M) button to bring up the Music settings screen. 
  On the Music settings screen, you can: 
● Press the Left/Right (◄/►) button to move to previous/next setting menu; when 
selected, press the UP/Down (▲/▼) button to move to the setting item of the 
menu. 
● Press the OK button to confirm the setting. 
● Press the Return () to back to the previous menu. 
3.  In the Music settings screen, you can set up the following options: 
Setting menu  Setting item  Description 
On Enable the sound during music playback. Vo l u m e  
Off Disable the sound during music playback. 
Normal Play the music files in order. 
Repeat One Repeat the selected track. 
Repeat All Repeat playing all tracks in the folder. Repeat 
Random Play all tracks in the folder randomly. 
Brightness Set the brightness level (1 ~ 5) of projection 
screen. 
Contrast Set the contrast level (1 ~ 5) of projection screen. Color Setting 
Saturation Set the saturation level (1 ~ 5) of projection screen. 
Yes Select to confirm to delete the selected file. 
Delete 
No Select to return to the previous menu without 
deleting the selected file. 
Exit Exit Exit the Music settings screen. 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 14 
EN 
Playing Photo 
1.  On the Main menu, select the Photo item and press the OK button to enter the Photo 
screen. 
  Do one of the following: 
● Press the OK button to start the slideshow. Press OK button again to pause the 
slideshow. 
● Press the Left/Right (◄/►) button to jump to the previous/next picture. 
● Press the Up/Down (▲/▼) button to zoom in/out a picture while in still image. 
● Press the Up/Down (▲/▼) button to increase/decrease the volume while in 
slideshow. 
2. Press the Menu (M) button to bring up the Photo settings screen. 
  On the Photo settings screen, you can: 
● Press the Left/Right (◄/►) button to move to previous/next setting menu; when 
selected, press the UP/Down (▲/▼) button to move to the setting item of the 
menu. 
● Press the OK
 button to confirm the setting. 
● Press the Return ()
 to back to the previous menu. 
3.  In the Photo settings screen, you can set up the following options: 
Setting menu  Setting item  Description 
Slideshow 
Effect Enable or disable the transition effect while 
changing photos during the slideshow. 
Slide Show Enable or disable the slideshow function. If disable 
the selected picture will be shown after manually 
change by using Left/Right (◄/►) button 
Speed Set the interval time of changing photos during the 
slideshow. 
Photo Setting 
Music Enable or disable the music playback during the 
slideshow. 
Rotate  Press to rotate the selected picture by 90° 
clockwise. The picture will be displayed in 0° 
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 15 
EN 
Playing Files 
1.  On the Main menu, select the File item and press the OK button to enter the File 
screen. 
2. Press the Menu (M) button to bring up the File settings screen. 
  On the File settings screen, you can: 
● Press the Left/Right (◄/►) button to move to previous/next setting menu; when 
selected, press the UP/Down (▲/▼) button to move to the setting item of the 
menu. 
● Press the OK button to confirm the setting. 
● Press the Return () to back to the previous menu. 
3.  In the File settings screen, you can set up the following options: 
Setting menu  Setting item  Description 
Brightness Set the brightness level (1 ~ 5) of projection 
screen. 
Contrast Set the contrast level (1 ~ 5) of projection screen. Color Setting 
Saturation Set the saturation level (1 ~ 5) of projection 
screen. 
Yes Select to confirm to delete the selected file. 
Delete 
No Select to return to the previous menu without 
deleting the selected file. 
Exit Exit Exit the Music settings screen. 
 
Playing Presentation 
1.  On the Main menu, select the Presentation item and press the OK button to enter the 
Presentation screen. 
2.  The projector can play the converted PPT/PDF file store on internal memory, USB 
Dongle or SD/SDHC/MMC card. 
  For more information, see the Converting presentation files section. 
3.  While playing the PPT file, do one of the following: 
● Press the Left/Right (◄/►) button to move to previous/next page. 
● Press the OK button to start/pause presentation. 
● Press the Up/Down (▲/▼) button to go to the previous/next animation effect. 
● While playing the PDF file, do one of the following: 
● Press the Left/Right (◄/►) button to move to previous/next page. 
● Press the Up/Down (▲/▼) button to move page up/down. 
 
  4:3 (Width: Height) PDF file are not supported. 
   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 16 
EN 
Playing files in other devices 
You can connect the projector to your media players. Before connecting your media player 
to projector, you need to have the media player’s dedicated composite AV-out cable and 
the projector’s AV cable ready. 
 
 
 
1.  Connect the Composite AV-out cable to the media player. 
2.  Connect both AV cables (yellow to yellow, white to white and red to red). 
 
 
1.  White might be black on some media players or cables. 
2.  Please make sure that your media player is enabled with AV-out function. 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 17 
EN 
USB Projection 
System Requirements 
Your system should have at least the following specifications to make PocketCinema V50 
working smoothly on your system: 
 
Operating System: Windows XP SP2 or higher, Windows Vista, Windows 7 
CPU:   Dual Core CPU or higher 
RAM:   2GB DDR RAM or higher 
Interface:  1x free USB 2.0 Ports 
Hard Disk:  50MB free space
 
 
 
How to Install Driver on your PC 
Before using the projector to projection, you need to install the Pico Projector driver on 
your Notebook/PC. 
1.  You can find the setup program included in the Software CD and internal memory. 
Double click to run the Setup Wizard, and then follow the on-screen instructions to 
continue the installation. 
2.  The Setup Wizard will appear to select the language you prefer. Simply follow the 
on-screen instructions to continue the installation. 
3.  During the driver installation, Hardware Installation dialog may pops up. Please click 
Continue Anyway on the Hardware Installation dialog window. 
 
 
For Windows XP  For Windows Vista /7 
 
4.  When the driver installation is completed, Computer Restart dialog will pops up. 
Please choose “Yes” to reboot your computer, and then click “Finish” to close the 
program.   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 18 
EN 
 
5.  After rebooting, Pico Projector is installed in your Notebook/PC successfully. 
 
Start the Projection 
After installation, you will find Pico Projector icon on your desktop. Click on the icon to start 
the projection. Then the control icon of Pico Projector will appear in the function bar next 
to the clock. 
 
The Control Panels shows three functions: 
 
1. Full Screen:  The projected image has same resolution like your PC. The 
picture is displayed 1:1 and shrinked to the native resolution of 
the Pico Projector automatically. Use this mode on powerful PC’s 
if you need the full resolution. 
2. Compatible Mode:  In compatible mode the resolution of your PC is reduced to 
800x600 pixel and projects with the pico projector. The 
advantage is a maybe better picture quality and better 
performance of your system. 
3. Exit:  This mode will turn off the projector and close the driver. 
 
 
  Please remember that every time you want to use the projector please follow the 
steps like below: 
1.  Use USB cable to connect the projector with your Notebook/PC. 
2.  Open the Pico Projector application by clicking the icon on desktop. 
3.  Choose the best mode for your projection. 
 
  Using a Netbook with Atom CPU or other single core processor may influence the 
performance of your system. Some ideas might help to make the projection more 
smoothly. 
1.  To adjust the resolution of video under 640x480. 
2.  Select “Compatible Mode” to project. 
3.  Use the following license free media player for video playback from   
http://kmplayer.en.softonic.com 
 
In order to save power, unplug the USB cable from Notebook/PC when you finished your 
presentation.   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 19 
EN 
Converting presentation files 
Before PDF/PPT files can be playback on the projector, a converting to MPtG file is 
necessary. 
 
System Requirements 
CPU:  Intel Pentium-M 1.5G or above 
Memory:  256M or above 
Operating System:  Windows XP SP2 or higher, Windows Vista, Win 7 
Office:  Office 2003, Office 2007 
PDF Reader:  Adobe Reader 8, 9, 9.1 
 
To install the converting utility 
1.  Please connect the projector with your PC and turn on the projector. You can find the 
setup program included in the internal memory of the projector. 
2.  Double click on the icon to run the Setup Wizard, and then follow the on-screen 
instructions to continue the installation. 
3.  When the installation is completed, the utility icon ( 
  ) will appear on your desktop. 
4.  Double click the icon to launch the converting utility. The control panel of the utility will 
appear as shown below: 
 
 
To convert PPT/PDF to MPtG 
1.  On the control panel, do one of the following: 
● Click   to convert PPT to MPtG. 
● Click   to convert PDF to MPtG. 
2.  Select the PPT/PDF file you want to convert. 
3.  Select target destination. 
 ● Input File: The full path of selected PPT/PDF file. 
● Output Drive: The path of target storing disk. 
● Output File Name: The name and full path of converted MPtG file. The system will 
store the converted file in the same folder (if there is not any removable disk 
detected) with the same name of the source file. 
4. Click OK to start converting. When done, you can directly play the file on your 
projector!   
						

							Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Aiptek ManualsUser’s Manual 
www.aiptek.eu Page 20 
EN 
Limitations and Settings 
● MPtG supports most of animation effects of PPT that could be displayed on desktop 
screen, excluding: 
● The animation effect that uses timer or repeat function to playback automatically. 
● The single animation effect that is longer than 60 seconds. If there is the recycling 
animation effect, MPtG will record it for up to 60 second. 
● If the PPT screen stop to change for 3 seconds, the system will distinguish it as 
finished of current animation and will send “Enter” key to ask PPT for next step. 
● The embedded VBA object and OLE object. 
● To change the maximum of animation effect time, click the   icon on the 
control panel and then select 10/20/30/60 seconds from the Maximum Animation 
Display Time dropdown menu.