Air Live Router WL-1000UR User Manual
Here you can view all the pages of manual Air Live Router WL-1000UR User Manual. The Air Live manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 61
61 5.2 Configuring on Windows NT Platforms The configuration procedure for a Windows NT platfo rm is similar to that of Windows 95/98 except the screen of printer Properties: Compared to the procedure in last section, the selection of Details is equivalent to the selection of Ports , and Port Settings is equivalent to Configure Port.
Page 62
62 5.3 Configuring on Windows 2000 and XP Platforms Windows 2000 and XP have built-in LPR client, users could utilize this feature to Print. You have to install your Printer Driver on LPT1 or other ports before you preceed the following sequence. 1.Open Printers and Faxs .
Page 63
63 2.Select “Ports” page, Click “Add Port…” 3. Select “Standard TCP/IP Port”, and then click “New Port…”
Page 64
64 4.Click Next and then provide the following information: Type address of server providing LPD that is our NAT device:192.168.1.254 1. Select Custom, and then click “Settings…”
Page 65
65 6. Select “LPR”, type ” lp“ lowercase letter in “Queue Name:” And enable “LPR Byte Counting Enabled”.
Page 67
67 5.4 Configuring on Unix-like based Platforms Please follow the traditional configuration procedure on Unix platforms to setup the print server of this product. The printer name is “lp.” In X-Windows, for example, In Redhat Platforms, Please follow the below steps to configure your prin ter on Red Hat 9.0.1. Start from the Red Hat---> System Setting---> Printing.
Page 69
69 4. Select LPD protocol and then forward. 5. Enter Router LAN IP Address and the queue name lp. Then forward.
Page 70
70 6. Select the Printer Brand and Model Name. Then Forward. 7. Click Apply to finish setup. 8. At last you must click Apply on the t oolbox to make the change take effective.