Air Live Router WLA-5200AP User Manual

 
 
 
 
 
 
WLA-5200AP   
802.11a/b/g Multi-function  Wireless Access Point 
User’s Manual  

ClauseDescription
■ EN 301 893 v1.2.3Broadband Radio Access Network(BRAN); 5GHz high 
     (2003-08)performance RLAN; Harmonized EN Covering essential 
requirements of Article 3.2 of the R&TTE Directive. 
■
 EN 300 328 v1.6.1Electromagnetic compatibility and Radio spectrum matters (ERM);
     (2004-11)Wideband transmission equipment operating in the 2.4GHz ISM band
And using spread spectrum modulation techniques; Part 1: technical
Characteristics and test conditions  Part2：Harmonized EN covering...

WLA-5200AP CE Declaration Statement 
Country Declaration  Country  Declaration cs 
Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento 
WLA-5200AP je ve shodě se základními 
požadavky a dalšími příslušnými ustanoveními 
směrnice 1999/5/ES. lt 
Lietuvių 
[Lithuanian] Šiuo OvisLink Corp. deklaruoja, kad šis WLA-5200AP 
atitinka esminius reikalavimus ir kitas 1999/5/EB 
Direktyvos nuostatas. 
da 
Dansk [Danish] Undertegnede OvisLink Corp. erklærer herved, at 
følgende udstyr WLA-5200AP overholder de...

 
FCC Certifications 
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to 
provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can r adiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.  However, there is no...

 
Table of Contents 
INTRODUCTION........................................................................\
..................................1 
FEATURES........................................................................\
..........................................1 
APPLICATION........................................................................\
......................................2 
PARTS NAMES AND FUNCTIONS........................................................................\
...........3...

 
                                                                       1                                        WLA-5200AP v2 User’s Manual 
INTRODUCTION 
AirLive WLA-5200AP is an IEEE802.11a/b/g compliant 11 Mbps & 54 Mbps 
Ethernet Wireless Access Point.  The Wireless Access Point is equipped with two 
10/100 M Auto-sensing Ethernet ports for connecting to LAN and also for 
cascading to next Wireless Access Point. 
This Access Point provides 64/128bit WEP encryption, WPA and IEEE802.1x 
which...

 
Application 
Example 1 
 
Example 2 
 
          
                                                                       2                                        WLA-5200AP v2 User’s Manual  

 
Parts Names and Functions 
1. Front Panel: (LED Indicators) 
 
 
LED Status 
Indicator Color  Solid Flashing 
Power YellowTurns solid green 
when the power is 
applied to this device.N/A. 
YellowTurns solid Yellow 
when the Ethernet 
cable is connected 
the LAN port. Receiving/ 
Sending data 
LAN1, 
LAN2 
Wireless  Yellow Turns solid Yellow 
when the power is 
applied to this 
device.   Receiving/ 
Sending data 
Table 1: LED Indicators 
 
 
2. Rear Panel: Connection Ports...

 
                         
Port/button   Functions 
Use standard LAN cables (RJ45 connectors) to 
connect your PCs to these ports. 
If required, any port can be connected to another 
hub. Any LAN port will automatically function as 
an Uplink port when necessary. 
LAN ports 
(LAN1,LAN2) 
(Factory)  
RESET 
Press over 3 seconds to reboot this device. 
Press for over 10 seconds to restore factory 
settings.  
Performing the Factory Reset will erase all 
previously entered device settings. 
Connects the...

 
HARDWARE CONNECTION 
Note: Before you starting hardware connection, you are advised to find an 
appropriate location to place the Acce ss Point. Usually, the best place for the 
Access Point is at the center of your wire less network, with line of straight to all 
your wireless stations. Also, remember to adjust the antenna; usually the higher 
the antenna is placed, the bette r will be the performance.  
 
1. Connect to your local area network:  connect a Ethernet cable  to one of 
the  Ethernet...