Air Oasis IAQ Test Kit User Manual

							• AO 1000G3, AO 3000G3, AO 3000XG3
• Air Oasis Mobile Sanifier®
Household:
• AO 3000XG3
• AO 5000
Commercial:
• AO Bi-Polar 2400
• AO nano Induct 6
• AO nano Induct 9
• AO nano Induct 14
HVAC Professional:
Global Leaders
in Air Purification
Copyright© 2015 Air Oasis LLP. All Rights Reserved.3401 Airway Blvd., Amarillo, TX 79118800.936.1764 • www.airoasis.com 
						

							Directions For Use
Note: Any disturbance will change the results. Do not
sneeze, cough, or disturb testing in any way.
1
Prep the Dish
Thoroughly wash hands with 
anti-bacterial soap. Carefully 
remove the lid of the first Petri 
Dish. Do not touch the inside 
of the dish or the inside of the 
lid. Pour one bottle of Easygel  
into the Petri Dish.2
Take the Sample
Leave the prepared dish 
(open lid) for 1 hour:
• Away from air vents
• Away from open windows
• Away from pets & kids
Do not sneeze or cough 
near the dish.3
Store & Incubate
After 1 hour, close the lid 
and seal it shut with 2 small 
pieces of tape. Place the 
sealed dish in the original 
product box to incubate for 
4-5 days.4
Turn it on
As soon as the first sample 
has been sealed and is 
incubating, turn on your air 
purifier.
5
Repeat
After one week of operating 
your Air Oasis® purifier, 
repeat steps 1-3. Do your 
best to replicate the same 
location and conditions as 
the first sample.6
Photograph
4-5 days after incubating the 
first sample, photograph the 
results. Repeat with the 2nd 
sample after incubating 4-5 
days.
Possible result
from severely 
contaminated air. Possible result
after air 
purification.
7
Compare
Place the dishes side by 
side, or review photos side 
by side.
Red spots indicate bacterial 
colonies. Black or brown 
fuzzy spots indicate mold.8
Safe Disposal
Treat with care as bacteria 
and mold has been 
growing. Add 1 tablespoon 
of household bleach to 
each dish before disposal.
Before and After Petri Dish Air Quality Test