Airpura Air Purifier R 614 User Manual

							Turn the 
Airpura
back onto 
its casters






 
   


 
 
  
 
  
						

							




 
To vacuum the pre-filter






Filter Maintenance and Replacement 




 
Use the brush attachment on your vacuum cleaner
Vacuum slowly around the mesh surface of the filter chamber




 
Can be vacuumed from the exterior of the unit
once a month or more often.
Should be replaced at least after 12 months of use





Should be replaced at least every 3 to 5 years of normal 
use 



 
Turn over 
the Airpura 




Remove the 
4 retaining 
screws




Take off 
the cover



 
To open the filter chamber



 
Remove the 
gasket



 
Unfold the filter slider(Supplied with replacement filters or on request Part#6F 001) 
Roll it into a spiral 
Insert the tube into the filter chamber inside the pre-filter
Let the spiral open to fill the opening
Open the top of the spiral to make a slight funnel
Insert the carbon canister into the funnel and hold it straight
Let the canister slidedown the filter slider
Pull the filter slider upout of the cavity using both hands and let the canister slide to the bottom of the cavity
Remove the filterslider and fold it for further use
Place a felt gasketat the bottom of the filter chamber
Position the pre-filterinside the filter chamber 
Slide in the Hepa filter 
Should be changed as needed in heavy applications and 
at least every 24 months in normal use.



 
See over for closing the filter chamber
 
The HEPA Filter
 




The Pre-Filter 





The Activated Carbon Filter