Home > AITech > Wireless > AITech ProAV Media Extender Wireless HDMI User Manual

AITech ProAV Media Extender Wireless HDMI User Manual

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual AITech ProAV Media Extender Wireless HDMI User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 AITech manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

Page 21

20
(8) If all operation is normal, the POWER LED and SOURCE LED w ill glow in solid blue. Please refer
to the next form containing detailed LED descriptio n :

Note: A. Make sure your High-Definition audio/video devices connected to the TRANSMITTER has
already been powered on.
B. Warming-up or source switching time should take app roximately 20~30 seconds if the
operation is in normal condition.

(9) TRANSMITTER /RECEIVER Status Indicator LED Light and OSD...

Page 22

21

Note:
A. If there is no signal quality shown, and the Source & Status LED is blinking in blue, the
transmitter is most likely out of range. You may ha ve to verify the range and adjust shorten the
distance between the your HDTV set with the transmi tter and the receiver. (The maximum
video transmission range is 66 feet in line of sigh t (LOS) scenarios.) < The minimum range is 6.5
feet. >

B. If the connection or link is lost, it may be caused by the following reasons:
a....

Page 23

22
Step 5: For multi-room audio/video transmission or t
ransmission between different
floors, user could press the “WIDE” button on the remot e control to enable the Wide
mode for longer-range audio/video transmission..

Note :
Only 1080i or below HD video transmission is availa ble when enabling the “W ide” mode (OSD
shows : WIDE On). Please shorten the distance and d isable the “W ide” mode (OSD shows : WIDE
Off) if full HD 1080p 60Hz content transmission is desired.

Page 24

23
Step 6: Mounting to the Wall

(1) Refer the drawing of the bottom page
that have relative position of the key
holes and attach this paper on wall.

(2) Drill pilot holes.

(3) Insert the supplied two Anchors into the
wall.

(4) Insert two screws into the anchors. Leave
1/8” length for mounting the Transmitter
or receiver.

(5)
Place ProA/V Media Extender W ireless
HDMI key holes over the protruding
screws and slide down into position....

Page 25

24
4. Troubleshooting

Problem Solution
The ProA/V Media
Extender Wireless
HDMI front panel
power indicator (red
LED) doesn't light up.
Check if the power plugs of TRANSMITTER/RECEIVER ar e properly
inserted into a functioning power outlet.
There is no video
displayed on your TV
screen.
The wireless link might require 80 seconds to conne ct between
transmitter and receiver, and show video on the TV screen. Please
be patient and wait for a while.
Verify that...

Page 26

25
No audio.
Check your TV’s volume is properly set and not in " MUTE" mode.
Check if the audio connectors are properly connecte d.
Ensure the bit rate of audio from the source device can be supported
by ProA/V Media Extender Wireless HDMI. Please refe r to the details
in Chapter 6 Audio Bit Rate Support .
No Supported Video
/Audio on WIDE mode
only.
Check the HDMI output setting of Source device, set up HDMI output
format to Auto mode instead of 1080p.
...

Page 27

26
5. Supported Resolution

If the SOURCE LED continues to blink in blue (slower than “no signal” mode); OSD display: “No
Supported Format ” and there is no video displayed or the video quality suffers, it indicates that the
video frame rate from your A/V source device is not supported. Ensure that the consumer timing of
your HD device is compliant with the standard liste d below:

V ideo Format T imings Resolution WIDE mode OFF WIDE mode ON
Primary CEA V ideo T iming
640x480p @ 59.94...

Page 28

27
6. Audio Bit Rate Support Digital Audio from HDMI inputs: Up to 6Mbit/s bit-r ate support.
Support AC3 and DTS.
2-channel PCM over S/PDIF : 16~24 bits audio sample with 32~48KHz sampling
rate
2channel PCM 32KHz 44.1KHz 48KHz 96KHz
16 bits YES YES YES n/a
24 bits YES YES YES n/a

Page 29

28
7. Product Specification
General Specifications
Supported V ideo
Resolutions HDMI Input 1080p, 1080i, 720p, 576p, 480p
Supported Audio
Formats Digital Audio up to 6 Mbps AC3 and DTS
Transmission Distance The maximum video transmission range is 20 meters (
66 feet)

(The minimum range is 2 meters)
line of sight (LOS) scenarios
System Latency No latency (

View all the pages

Add page 31 to Favourites

All AITech manuals Comments (0)

Related Manuals for AITech ProAV Media Extender Wireless HDMI User Manual

AITech Wireless Cable TV User Manual
2 pages | AITech Wireless
AITech Wireless HDMI Advanced User Manual
16 pages | AITech Wireless
AITech ProAV Media Extender 5GHz Digital User Manual
8 pages | AITech Wireless
AITech ProAV Media Extender User Manual
13 pages | AITech Wireless
AITech ProPCTV Wireless Mini User Manual
15 pages | AITech Wireless
AITech ProPCTV Wireless User Manual
13 pages | AITech Wireless
AITech HDTV USB User Manual
22 pages | AITech Wireless