AITech ProPCTV Wireless Mini User Manual
Have a look at the manual AITech ProPCTV Wireless Mini User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 AITech manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 10
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE...](http://img.usermanuals.tech/thumb/265/4644/w64_propctv-wireless-mini-1478703601_d-9.png "Page 10
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE...")
I FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against h armful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radi o communication. However, there is no grantee that interference will not occu r in a particular installation. If this equipment does cause harmful interference to r adio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by on e or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV tech nician for help. Notice: Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s au thority to operate the equipment. CE DECLARATION This device complies with CE. These limits are desi gned to provide reasonable protection against harmful interface in a residenti al installation. All contents are subject to change without notice. All trademarks are the property of their respective owner.
Table of Contents
II
Chapter 1. Overview …………………………………………..................... 1
1.1 : Introduction …………………………………………………… ………….
1
1.2 : Features …………………………………………………………………..
1
1.3 : Specifications ……………………………………………………………..
2
1.4 : System Requirements …………………………………………… ………
2
1.5 : Package Contents ………………………………………………………..
2
Chapter 2. Outline Description ………………………………..…… ....... 3
Chapter 3. Installation ……………………………….……………… ……… 5
Chapter 4. Function Description …………………………………… …... 7
4.1 : Horizontal/Vertical position ………………………………………………
7
4.2 : HSIZE …………………………………………………………………..… .
7
4.3 : VSIZE ………………………………………………………………………
8
4.4 : BRIGHTNESS …………………………………………………………… .
8
4.5 : CONTRAST ……………………………………………………………… .
8
4.6 : SHARPNESS …………………………………………………………… ..
9
4.7 : DEFAULT ………………………………………………………………… .
9
4.8 : NORMAL / ZOOM ……………………………………………………… ...
9
4.9 : FREEZE / UN-FREEZE ………………………………………………… .
10
4.10 : FLICKER ………………………………………………………… .……...
10
Chapter 5. Troubleshooting ……………………………………………... 11
Chapter 1. Overview
1
1.1 Introduction
AITech’s ProPC/TV Wireless Mini accepts computer signal and convert
them into composite video format. With building in 2.4GHz wireless video
transmission technology, you can transmit comp uter VGA signal to TV
simply via wireless. Its purely hardware desig n and multi-system support
gives you the best solution for portable applicatio n! It supports VGA mode
up to 2048x1536 high resolutions!
ProPC/TV Wireless Mini is your best choice for computer Game or movie
showing on the big screen TV and no need to wo rry any cable connection
from computer to TV!
1.2 Features
- One 2.4GHz wireless VGA to TV transmitter and one receiver
- Instant Plug & Play, no software drivers required
- VGA signal to TV via 2.4GHz Wireless Transmission technology, do not
need any cables from computer to TV
- Support one VGA to TV transmitter to multiple rec eivers
- Wireless range up to 300ft. at open site area
- Channel number: 4 (2.400~2.483GHz)
- Multi system Support for NTSC and PAL
- 32 Bit True color quality
- OSD (on-screen-display) function, for convenient control function.
- Support maximum VGA resolution up to 2048 x1536
- Simultaneous display on both TV screen and PC mon itor
- 3 x zoom function support, best for presentation
- Horizontal/Vertical scaling and positioning
- Sharpness/Brightness/Contrast/Flicker control
- Freeze/Un-Freeze video control
- Auto-Saving for control parameters
Chapter 1. Overview
2
1.3 Specifications
- Transmitter
- Input: VGA signal (from computer);
Stereo audio jack (from computer);
RCA video/audio jack (Yellow/Red/White)
- Output: Computer monitor pass-thru;
2.4GHz wireless signal (Antenna)
- Power in: 5V/650mA
- Dimension (mm): 150 x 87 x 25
- Receiver
- Input: 2.4 GHz wireless signal (Antenna)
- Output: RCA video/audio jack (Yellow/Red/White)
- Power in: 6V/300mA
- Dimension (mm): 110 x 92 x 25
- Horizontal frequency: 31.469 KHz – 91.146 KHz
- Vertical frequency: 56Hz – 100Hz
- Support VGA Display mode up to 2048 x 1536 60Hz
1.4 System Requirements
- IBM PC or compatibles with VGA output connector.
- TV set or Video input device with Composite video input
1.5 Package Contents
- ProPC/TV Wireless Mini transmitter x 1
- ProPC/TV Wireless Mini receiver x 1
- Antenna x 2
- 15-pin HD extension VGA cable x 1
- RCA video/audio cable x 2
- 3.5mm x 3.5mm audio cable x 1
- Power adapter: 5V/650mA x 1 for transmitter
6V/300mA x 1 for Receiver
- User’s manual x 1
Chapter 2. Outline Description 3 Please refer to the figure as below for the outline of ProPC/TV Wireless Mini Transmitter Receiver
Chapter 2. Outline Description
4
Transmitter
1. PAL/NTSC :
TV system select
2. Monitor :
Connect to PC monitor
3. VGA in :
VGA signal from PC
4. Line in :
Audio from PC
5. DC 5V:
power in
6. A-IN :
Audio in from external video device (e.g. DVD playe r)
7. V-IN :
video in from external video device (e.g. DVD playe r)
8. AV / PC switch :
Select transmitter input source (e.g. PC or
DVD player)
9. Power switch : Power ON/OFF PCTVsender
10. M : OSD function button (this function for VGA to TV on ly)
11. CH : Channel selection
12. CH LED : Channel indicator
13. ANT : Antenna connection
Receiver
1. DC 6V: power in
2. V-out :
video output to TV
3. A-out : audio output to TV
4. Power switch : Power ON/OFF
5. CH : Channel selection
6. CH LED : Channel indicator
7. ANT : Antenna connection
Chapter 3. Installation
5
NOTE: Make sure “PCTVsender
”, Computer and TV are all power off
before installation
3.1 Transmitter connection:
3.1.1 Connect Antenna to “ANT” of Transmitter
3.1.2 Steps for VGA to TV function as below
1. Properly connect the 15-pin HD extension VGA cable between VGA
port (Computer) and “ VGA IN” (PCTVsender) input port.
2. Connect PC monitor cable to “ Monitor” (PCTVsender) output port.
3. Connect the 3.5mm x 3.5mm audio cable to “ LINE IN”
(PCTVsender) from Computer SPEAKER-OUT.
4. Switch correct system of NTSC/PAL switcher.
or 3.1.3 Steps for Video to TV function as below 1. Connect RCA video/audio cable from external device (e.g. DVD
player) AV out to “PCTVsender” ( V-IN and A-IN).
3.1.4 Connect 5V power adapter to “ DC5V” (PCTVsender) power port.
3.2 Receiver connection 3.2.1 Connect Antenna to “ANT” of Receiver.
3.2.2 Properly connect RCA video/audio cable from “ProPC /TV Wireless
Mini” ( V-OUT ) (A-OUT ) to TV’s AV input port.
3.2.3 Connect power adapter to “ DC 6V” (PCTVsender) power port.
Chapter 3. Installation
6
After connection
3.3 Push the “ON/OFF” power button. (ProPC/TV Wireless Mini transmitter
and receiver) to “ON” status.
3.4 Set the channel by pressing the select button on th e top of the transmitter
and the receiver to the same channel.
3.5 Push the transmitter “PC/AV” button to change the s ignal input between
PC or external device. (e.g. DVD player)
3.6 Turn on both computer (or DVD player) and TV.
3.7 Now the video showed on PC monitor or external devi ce (e.g. DVD player)
will display on TV screen simultaneously.
3.8 Adjust Transmitter and Receiver antenna to make b est transmission.
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE
BRINGHTNESS
CONTRAST
SHARPNESS
DEFAULT
NORMAL/ZOOM
FREEZE/UN-FREEZE
FLICKER