Aka Sorex Pro 7281 User Manual
Have a look at the manual Aka Sorex Pro 7281 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 AKA manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
AKA LLC ООО. Moscow. Selective Metal Detector SOREX PRO - light -portable -multi-frequency -supersensitive -fast -multipurpose Operating manual For Sorex Pro product support and discussions visit http://www.reviewdetector.ru Dont be lazy! Read it first!
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 2 Content CONTENT ................................................................................................................... 2 GENERAL GUIDELINES ....................................................................................... 3 PRODUCT FEATURES ........................................................................................... 3 DELIVERY SET ........................................................................................................ 5 SPECIFICATIONS .................................................................................................. 5 GETTING STARTED ............................................................................................... 5 POWER SUPPLY ..................................................................................................... 6 CONTROLS AND CONNECTIONS .................................................................... 6 CONTROL BUTTONS............................................................................................. 6 DEVICE DISPLAY ................................................................................................... 7 DEVICE SETTINGS ................................................................................................ 7 «М» (MAIN) MENU .............................................................................................. 8 «М1» (MAIN ADDITIONAL) ............................................................................ 9 «A» AUDIO MENU .............................................................................................. 11 «A1» ADDITIONAL AUDIO MENU .............................................................. 12 «V» VIDEO MENU............................................................................................... 14 «S» MENU .............................................................................................................. 15 GROUND BALANCING ....................................................................................... 16 DISCRIMINATION SEARCH MODE SETUP ............................................... 20 DISCRIMINATION SECTOR SETUP ............................................................. 22 ALL METALS SEARCH MODE ........................................................................... 22 STATIC MODE (PIN-POINT) ...................................................................... 22 SEARCHCOIL REPLACEMENT. ........................................................................ 23 VISUAL IDENTIFICATION TOOL - HODOGRAPH .................................. 25 THE ADVANTAGE OF HODOGRAPHIC INDICATION OVER VDI ..... 25 MULTI-FREQUENCY ............................................................................................ 26 SEARCH AND IDENTIFICATION METHODS ............................................. 26 ADDITIONAL MENU ........................................................................................... 29 QUICK REVIEW OF SETTINGS STATUS. ................................................... 29 TROUBLESHOOTING .......................................................................................... 30 WARRANTY ............................................................................................................ 31 QA/QC CERTIFICATE ........................................................................................ 31
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 3 General Guidelines Metal detector Sorex PRO is designed to search for and identify metal objects in dielectric (dry sand, wood etc) and low-conductivity environment (soil, brick walls etc). The device can be used in the following areas: - criminalistics; - engineering corps; - housing and utilities infrastructure, civil construction and firefighting, detection of buried utilities, pipelines, cables, manhole hatches, water posts, valve caps etc; - archeology and search for buried treasure The device is designed to work in the following conditions: ambient temperature from -5 to +50°С; relative humidity up to 98% at a temperature of 25°С; atmospheric pressure from 630 to 800 mm Hg Product features Sorex PRO is a selective eddy current metal detector with equalized induction transducer (searchcoil). This is the top-of-the-line professional model from the best- selling Sorex family. This unit has incorporated best time-tried hardware and software solutions from previous models. It was updated with a variety of new original features which increased search efficiency and make this device one of the most versatile detectors in the world. Sorex PRO is a multi-frequency device. Its configurations similar to the popular Sorex 7281 with 4 AA batteries power supply. The configuration of this metal detector allows using any searchcoil manufactured by the AKA Company regardless of their size or operating frequency. Like always, the device is based on our original two-channel pattern including independent and operating in parallel: - detection channel – the channel which transmits single-tone signal for the sound indication (SI) in the real-time mode (RT channel); -identification channel – the channel which transmits short tones with different frequencies to the SI after the searchcoil is moved above the target (ST channel) Just like other models, Sorex PRO may search in the dynamic mode, i.e. the target may be detected only when the searchcoil is moved. The static search mode is also available. It is intended for the exact detection of the target position. Sorex PRO has a comprehensive sound and visual identification system. First of all, this system includes our signature indirect hodographic visual identification of search objects, which is highly appreciated and considered to be the most informative method of object value or valuelessness detection. Sorex PRO provides the user with the widest range of SI in compliance with his personal choices and types of current tasks. But the main difference between this model and other detectors is its switch option for the so-called searchcoil signal main algorithm (MA) processing. This option provides better customization to search conditions and increases target identification reliability. This solution is applied for the first time.
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 4 Sorex PRO is able to process signals with three independent algorithms. The first one is – MSF. This is a traditional and widely used in previous models medium speed algorithm for general use. It is intended for slightly trashy areas. The second one is – SSF. The main feature of this algorithm is better detection of magnetic properties of metal objects, especially flat ones (iron plugs, tin pieces etc), which are often mistaken for nonferrous objects. The algorithm has significantly longer sound response delay. It is intended for the search in non-trashy areas. The third switchable algorithm is M/T (metal trash or fast dimensional harmonic search filtering FSF). Its main feature is fast signal processing. It is intended for trashy areas. This algorithm incorporates new concept with fastest processing of searchcoil signals from close targets. Its noteworthy feature is absence of sound response delay, which exists in SSF and MSF algorithms. So, Sorex PRO is a multi-frequency detector. It has a wide range of coils of different sizes and frequencies. It has several switchable main algorithms of signal processing which allows device adjustment for various search conditions: from trashy areas to deep search of single targets. The device equipped with 15DD-3kHz searchcoil may detect soldier’s helmet down to 1.4 m). The device is light (about 0.7 kg without the searchcoil) and it can be equipped with various types of shaft, including extendable arms providing no-disassemble portability option. With all these features Sorex PRO becomes one of the most versatile detectors with record-breaking detection depth and unique identification capabilities. Moreover, we are pleased to inform you that this model was updated to simplify its usage and increase the comfort of search. 1. We have updated ground balancing system. From now on the GB phase executed right after the searchcoil adaptation shall be taken as 0 by default. All current balance corrections performed during the search shall be calculated from this predefined phase zero-level. You have to admit that all phase “deviations” of the GB are better traced by the 0, it would facilitate the control over the quality of the balance. In other words, we have resolved the similarity issue. The GB phase level was standardized for all devices.. 2. Sorex PRO has a fully automatic searchcoil adaptation system. It means that the device automatically recognizes a new searchcoil installed instead of the old one operating with different frequency. The device detects such searchcoil and initiates adaptation program. 3. Sorex PRO is first device in the product line with search programs switchable on the fly and independent settings. There is no need to reset the device when search conditions change. 4. Moreover, the additional programmable multi-functional F button was added to facilitate operation. You can assign an operation for this button. F can be assigned for quick MA switch, change of sound indication type, change of short tone types and quick “Economy” mode start. 5. The layout of the device menu is worth describing. Unlike previous models of the product line this device has six page menu with immediate access to each page. All pages are theme-based: main menu, special (S) menu, audio (A) menu, video (V) menu. It increased intuitive perception of the menu, decreased setting search time and accelerated adjusting speed.
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 5 6. If you do not use your device for a long time and forget the status of its settings, we have quick settings review option for you. When you press and hold appropriate button the selected mode and settings will be displayed. Engineers of the AKA Company are sure that you will be happy with the catch you get with Sorex PRO. The introduction to the variety of original technologies used in this device will make your hobby more educative, interesting and exciting :). Delivery set • Electronic module 1 item. • Searchcoil DD 10” - 7kHz with rod 1 item. • Shaft* 1 item. • Arm rest 1 item. • Bracket ** 1 item. • Headphone *** 1 item. • Carrying bag *** 1 item. • Searchcoil protector*** 1 item. _________________________ *) the device may be equipped with extendable arm providing no-disassemble portability option **) electronic module bracket hanger in the arm rest zone for better mechanic balancing of the device (sold by supplementary order) ***) sold separately or in supplementary order WARNING! For additional accessories and types of searchcoils go to: aka.2000.ru Specifications Maximum detection range of metal objects (in the air, searchcoil 10DD - 7 kHz) ST channel: - coin Ø25 mm (brass), without electromagnetic interference - 47 cm; Operating frequency range, kHz - 1...22; Power supply (number of batteries, type, voltage): Number of batteries, type, voltage - 4, type АА, 4.8-6V Runtime: - 4 batteries 2800 mAh type АА (1.2V) - 20-40 hours; - 4 batteries type АА (1.5 V) - 10-20 hours. Dimensions, (package) mm: - 520х170х85; Weight (without batteries): - 950 ±5% g. Getting started Assemble metal detector. To assemble: - attach arm rest to metal shaft with two screws. - attach searchcoil to the internal (plastic) rod; - insert rod with the attached searchcoil into the metal shaft for the required length using
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 6 latches and holes in the shaft; - tighten collect clamp; - wrap the searchcoil cable around the shaft evenly and tightly (loose cable may cause false signals); - attach electronic module to shaft skids. - connect searchcoil slot to the electronic WARNING! Do not over tighten attachment and mounting fittings of the telescopic shaft. This applies especially to the plastic screw of the searchcoil and collet Power supply The device is powered by 4 AA batteries or rechargeable cells. Battery discharge control system automatically switches the device into power saving mode when voltage is less than4.2V. WARNING! Please insure that the battery (batteries) is properly installed (installation polarity is shown on the battery compartment). The device can be damaged in case of wrong polarity or power supply voltage. Do not use dead batteries with fresh ones. It would cause immediate charge drop in this set to the minimum. Controls and connections LCD graphic display, headphone jack and 7 detector control buttons are located on the front panel of the device (see picture). Searchcoil slot, on/off switch and battery compartment are located on the rear panel of the unit. Control buttons. «all metals – S menu». Switch between "discrimination" and "all metals" modes». Switch to S menu holding the button. «balance – V menu». Automatic ground balancing On. Switch device to manual ground balancing mode pressing one more time. Switch to the video (V) menu holding the button. «М menu – М1 menu». Pressing this button enter the main settings menu.
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 7 Switch to additional menu (M1) holding. «plus» button. Change values in settings mode. Warning! In the search mode is used as control button with pre-assigned mode (see below). minus Change values in settings mode. Warning! In search mode is used for the on the fly switch between norm and metal trash modes. «search – static». Used to turn on/off of the static search mode (pinpoint).Also exits settings modes (menu, ground balancing) in the search mode. «А menu – А1 menu». Enter audio and video settings of the device. Switch to additional audio menu (A1) holding Device display The display shows hodograph of the objects detected and operating information on the search modes. VDI means Visual Discrimination Indication. VDI Index This is a so-called electrical conductivity indication of the object. Angle between the vertical axis and main direction of the curl. hodograph located in the left part of the screen has negative VDI and the right one has positive VDI Signal level - signal amplitude from the object in arbitrary units . Device Settings Warning! All changed settings remain in the device memory after the switch- off, the device switches-on with latest settings. All device settings are changed pressing and . Exit settings mode pressing . As it was mentioned in the introduction, you may set up two independent and switchable on the fly blocks of settings or two independent search programs: for algorithms MSF/SSF and for M/T (metal trash, FSF) Factory settings are stored in device memory and user can revert to these settings turning on the device and holding hold it pressed till the end of the melody. VDI Index Type of sound indication Signal rating ST Type Battery level Algorithm (MSF, SSF, MT) Economy mode HR neutralization mode AGBT Mode
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 8 «М» (main) menu Enter M menu and browse its entries pressing several times on the device panel. Set up parameters - pressing and . Press for exit or automatic exit 7 seconds after the end of the setting. Menu entries. 1. Sensitivity 2. Threshold tone. 3. General Boost. 4. Left discriminator border. 5. Right discriminator border. Sensitivity This option allows adjusting sensitivity of your device. You may change its value from 0 to 21. Remember, increasing device sensitivity you get search depth increase but it comes along with possible interference from power lines and false responses from the searchcoil bumping obstacles. Chose appropriate sensitivity at the search area taking into account the formula highest value appropriate for stable device operation in this area. It is recommended to reduce device sensitivity in the areas with a lot of metal trash. Due to strong random noise from a large quantity of surface iron the device is unlikely to detect a coin located lower than this iron, while the depth is tolerable in the clear area (it could be even deeper). At the same time the device may not distinguish small nonferrous object (for instance, a flake [small odd-shaped coin]) located on the same level as the iron or a bit higher, from the total searchcoil snap including the deep iron. While the device with reduced sensitivity will see this coin because it is not dazzled by the iron below the coin. To sum up all the above mentioned: high sensitivity does not guarantee high search performance. Use this setting as the condition may demand and in accordance with the search target. Threshold tone This option allows adjusting sensitivity (detection depth) of the threshold tone of your device. The threshold tone is a detection channel signal informing you of the metal object detected by the device. After detection and during searchcoil motion the sound volume of the threshold tone increases, the highest value is above the center of the target. Over device operation and acoustic experience gained, the combination of threshold tone and identification signal tone, duration and loudness of threshold tone
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 9 would give you the full information on the size and relative target depth. Even two-target detection with one identification signal would be possible, but this is an exigeant stunt. We recommend to set the threshold tone sensitivity to 16-17 in clear areas and reduce it to the comfortable level in trashy areas. Maximum values of threshold tone sensitivity exceed device ability to identify target metal. That is why it may be applied for the search of metal objects at depths impenetrable for the identification, when any metal object detection is essential. General Boost (Gen. Boost) of searchcoil signal Option allows to regulate searchcoil signal boost for the detection channel (Threshold tone) and identification channel (ST Sensitivity) simultaneously. Such setting may be used in extremely trashy areas, beaches etc, when there is no need in a great search depth, and distinction of objects located close to each other is more important. In most cases we recommend to set value to 6. Left discriminator border Use buttons and to set up left discrimination sector border. All targets with VDI, as well as hodographs, located to the right of this border, will give the sound signal when they are detected by the device. Targets with VDI located to the left of this border do not give sound response. VDI by regulated border is shown in the frame. Right discriminator border Use buttons and to set up right discrimination sector border. All targets with VDI, as well as hodographs, located to the left of this border, will give the sound signal when they are detected by the device. Targets with VDI located to the right of this border do not give sound response. Hodograph of the objects cut by the discriminator will be shaded VDI by regulated border is shown in the frame. «М1» (main additional) To enter the «M1» menu press and hold . To browse its entries press button several times several times on the device panel. Set up parameters - pressing and . Press for exit or automatic exit 7 seconds after the end of the setting.
Selective Metal Detector SOREX PRO. Operating manual. AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru [email protected] 10 Menu entries 1. HRN mode (not available in the M/T mode). 2. Rate of AGBT (not available in the M/T mode). 3. FGR (false ground response) filter . 4. Algorithm (not available in the M/T mode). HRN mode (hot rock neutralization) This option allows to turn on/off non-discrimination algorithm of hot rock signal neutralization. When it is turned on, most of the round-shaped rocks do not give identification signal, only the threshold tone with a light sound increase appears. The search becomes more comfortable in the area containing large quantities of such rocks, but it should be noted that in the uneven and broken ground, for instance in the rough plow land, this algorithm may detect some small targets in soil clods incorrectly and clip them out. In such case they would give the threshold tone signal only, sharper and shorter than rocks would. That is why in such places we recommend you to turn this algorithm off. Rate of AGBT(automatic ground balance tuning). With this setting you can turn on/off automatic tracing of ground balancing change and its correction by the device during operation (for MSF and SSF algorithms only (see below). When this setting is on, the display shows A. When this function is turned on, the device traces soil mineralization, searchcoil heating and cooling and other factors, influencing the accuracy of the device ground balancing, and it makes a correction allowing operator not to mind changes himself and perform the ground balancing procedure less frequently. This option is not recommended for use in trashy areas. FGR (false ground signals) Filter Option allows to select false signal block-out level, signals caused by high conductivity of the ground (salty soil, sea beach etc). It is particularly important when using large-size ( (10’ and 12,5’x9,5’) searchcoil operating at high frequencies (14-20 kHz), that comes from the specific character of the interaction of those searchcoils with the high-conductivity soils. If you search in new area and notice that the device gives quite a few false signals (FS) in clear zones with pre-set sensitivity, dont decrease sensitivity. It may lead to the loss of deep targets. Use the FGR filter. This filtering is a softer way to preserve deep search of the device with regard to sensitivity decrease. It involves sophisticated multi-objective filtering algorithm. Get comfortable (FS minimum) scanning of clear zones bringing up filtering level gradually. Remember that excessive FGR filtering would cause missed targets in some cases. Adequate filtering levels depend on various factors, such as soil mineralization and