Akai Dv R4410ss Operators Manual

E - 20(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
Fast Forward/Fast Reverse
1.Press the TUNING  or  TUNING button when a disc is playing.
• The disc begins fast scan at x2 speed.
 Four speeds are available. Each time TUNING 
  or  TUNING
button is pressed, the speed of fast scan changes in the following
sequence:
2.Press the 
 PLAY button when you reach the desired point to resume playback at normal speed.
Slow-motion play...

E - 21
DV D
Angle selection
Some DVDs contain scenes which have been shot from a
number of different angles. For these discs, the same scene
can be viewed from each of these different angles.
1.While you are playing a DVD with different angles recorded,
press the ANGLE button to view the number of the current
angle.
2.Press the ANGLE button repeatedly to change the scene
to the next angle in those recorded.
 About two seconds later, playback continues from the new
angle you selected.
 If no button is...

E - 22
Special Functions
DV D
DISPLAY function
Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE.
 While the disc is playing, press the DISPLAY button to display the screen shown below.
Elapsed time: Elapsed time from the beginning of the chapter which is currently playing.
Remaining time: Remaining time of the title which is currently playing.
 Press the DISPLAY button twice to display the screen shown as below.
 Press the ANGLE, AUDIO and...

E - 23
Locating a specific title
If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.
1. In stop mode, press the GOTO button.
2. Press 
,  or  button to highlight a specific field and press the corresponding number button(s) for the title you
want.
3. Press the ENTER button to confirm. The Unit will star t playback about 3 seconds later.
Note :
 Pressing the CLEAR button resets the title number.
Locating a specific title / chapter / track
If you...

E - 24
Locating a specific time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds)
1. Press the GOTO button.
2. Press 
 or  button to highlight time.
3. Press the corresponding number buttons for the setting point you want.
 The first two numbers you entered represent hours.
 The second two numbers you entered represent minutes.
 The third two numbers you entered represent seconds.
4. Press the ENTER button to confirm. The Unit will star t playback about 3...

E - 25
Programmable memory
The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed
playback.
Title / Chapter programmed playback
1. Press the MEMORY button while the disc is stopped.
2. Enter the title numbers in 
- -. Use  or  button to move the highlight to chapter and enter the chapter numbers
in 
- -.
3. Use 
, ,  or  button to move to the other field.
4. Repeat steps 2 to 3.
5. Press the 
 PLAY button to start the programmed playback.
Notes :
...

E - 26
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, A-B repeat)
Repeating a title
You can play the same title repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the “
Repeat Title”
indicator displays on the screen. The current title is played repeatedly.
Repeating a chapter
You can play the same chapter repeatedly.
2. While the disc is playing, press the REPEAT DISC button until the
“
Repeat Chapter” indicator displays on the screen. The...

E - 27
This Unit will play MP3 and Picture files recorded on CD-R disc.
Playing a MP3 file disc
1. Press the OPEN /CLOSE button, the disc tray opens.
2.
 Insert a MP3 file disc on the disc tray with the label side up.
3.
 Press the OPEN/CLOSE button, the disc tray closes.
4.
 The Unit will take a short while to load the disc and
automatically begin playback.
To pause playback
•Press the  PAUSE button. To resume playback again, press the PLAY button.
To stop playback
Press the  STOP button.
To skip to...

E - 28
PLAYING MP3 AND PICTURE FILE DISC
Playing a Picture file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2.
 Insert a Picture CD on the disc tray with the label side up.
3.
 Press the OPEN/CLOSE button, the disc tray closes.
4.
 The unit will take a short while to load the disc.
5. Press the 
PLAY button. The next picture will automatically display after 6 seconds.
Notes:
 If you press the MENU button on the remote control in full-screen review, the Unit will display a menu of 9...

E - 29
LANGUAGE setting
1. Press the FUNCTION button until DVD appears on the display.
2. Press the STOP button so that no disc is playing.
3. Press the SETUP button.
4. Use 
 or  button to select the Language, then press the ENTER button.
5. Use 
 or  button to English, then press the ENTER button. The screen will change to English Wordings
immediately.
6. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
CUSTOMIZING THE FUNCTION SETTINGS
(continued on next page)...