Home > AL-KO > Caravan & Motorhome > AL-KO ALKO Safe Installation Guide

AL-KO ALKO Safe Installation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual AL-KO ALKO Safe Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 AL-KO manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Vehicle Technology
    Select desired location, hidden inside a locker or
    bedbox. Check the safe will fit and the door can 
    be operated. Care must be taken to ensure that
    there are no obstructions under the floor where
    the mounting plate is to be fitted (e.g. gas, 
    electric, water services).DO NOT OBSTRUCT
    ANY AIRVENTS
    Remove the safe and use the mounting
    plate as a template to mark where the holes have
    to be drilled.
    The holes in the mounting plate are offset. Thus
    the edge of the mounting plate can be positioned
    flush to the same surface as the safe is fitted. Drill
    6.5mm diameter holes.
    Check floor thickness and select appropriate bolts
    from fixings supplied. (see table) Position the
    mounting plate on the
    underside of the floor so
    that its’ surface is flush with
    the floor and the bolt heads
    are in the recesses in the mounting plate.
    Remove the 4 appropriate bungs from the 
    floor or rear wall of the safe. Insert the bolts
    through the mounting plate, floor and safe.
    The smooth head of the bolt must be on the 
    outside. Place the washers onto the bolts 
    protruding into the safe and use the dome headed
    nuts to secure.
    WARNINGIf installing safe flat on its back then
    care should be taken when operating door to
    ensure it is not accidentally knocked shut.
    Do not use the key as a handle as it may 
    cause the key to weaken or distort.
    AL-KO Kober Limited, South Warwickshire Business Park, Kineton Road, Southam, Warwickshire, CV47 OAL
    Tel: (01926) 818500  Fax: (01926) 818562  
    www.al-ko.co.uk   [email protected]
    Tools required - Drill, 6.5mm drill, 10mm ring spanner or socket
    Guide to Fitting an AL-KO Personal Effects Safe
    Floor
    Thickness  (mm)Bolt Length
    (mm)
    34,5
    38 - 41
    6050
    55
    65
    Par t No.External Dimensions (mm)Internal VolumeOuter Wall
    ThicknessWeight
    245091 8.5kgs3mm
    14 litres 300 x 240 x 200
    In line with our company policy of constant improvement, we reserve the right to change the specifications without notice.
    The AL-KO Personal Effects Safe
    comes complete with removable
    internal shelf, mounting plate,
    with all fixings, and 2 keys.
    ISSUE. 11/03 
    						
    All AL-KO manuals Comments (0)

    Related Manuals for AL-KO ALKO Safe Installation Guide