Alamo SL60 Skid Steer Rotary Parts Manual 00777576P

							
HITCH ASSEMBLY S/N 10308 -CURRENT Rev 05-04


ITEM PART NO. QTY.DESCRIPTION

1 00778252 1HITCH
2 00776391 1SAFETY CHAIN
3 00777547 4UPPER FLOATING LINK
4 00776362 2LOWER FLOATING LINK
5 00776382 8BUSHING
6 02030300 2LOCK NUT
7 03200267 2BOLT
8 02956948 8LOCK NUT
9 02845500 8BOLT 5/8 NC X 2
10 00756077 2WASHER


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 9 
						

							
SKID SHOE ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 00775568 1FLAT BAR SKID SHOE RH
2 8277 10PLOW BOLT 3/8 NC 1-1/4 #3 PL
3 00011100 4FLATWASHER
4 00015800 2LOCKNUT
5 00776369 1FLAT BAR SKID SHOE LH
6 00776378 1*SKID SHOE RH (OPTIONAL)
7 00776377 1*SKID SHOE LH (OPTIONAL)
8 00748823 4*HHCS 1/2-13UNC 1-1/2 PL5
9 00001800 4*LOCKNUT TLM 1/2 NC PLB
Parts with ( * ) are part of Kit 00776324


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 10 
						

							
REAR CHAINGUARD ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 00001800 7LOCKNUT
3 00748823 7HHCS 1/2-13UNC 1-1/2 PL5
4 00776374 2REAR DEFLECTOR PANEL
5 00776375 1DEFLECTOR STRAP
6 00776595 1CHAIN GUARD ASSEMBLY


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 11 
						

							
CHAINGUARD ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 00001800 18LOCKNUT
2 00002700 18FLATWASHER
3 00748823 2BOLT
4 00775554 1RIGHT SIDE SHIELD
5 00775556 1DEFLECTOR BRACKET
6 00775776 2ASY,FRONT CHAIN GUARD
7 00775782 1LEFT SIDE SHIELD
8 02030700 18BOLT


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 12 
						

							
SPINDLE ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

00763572 1SPINDLE ASSY

1 00763571 1SPINDLE HOUSING
2 00763570 1SPINDLE
3 00748537 1BEARING CUP
4 581038 1BEARING CONE
5 5810310 1OIL SEAL
6 00769938 1BEARING
7 02707900 1LOCKWASHER
8 02962030 1LOCKNUT
9 02959018 1RELIEF FITTING
10 00565000 1CHECK PLUG
11 581037 1KEY
12 15C2000 1WASHER
13 5D20120 1SLOTTED NUT
14 00606000 1COTTER PIN


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 13 
						

							
BLADE PAN ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 582011 1BLADE CARRIER PLATE
2 582012 1BLADE CARRIER PAN
3 00776437 1BLADE SET, CONTAINS 2 BLADES (UPDRAFT)
4 571044 2SHOULDER BOLT (L.H. THREADS)
5 571045 2WASHER
6 5GL16140 2LOCKNUT
7 7AH5101816 2BOLT
8 00749136 6LOCKNUT
9 00756077 8WASHER
10 00752681 4BOLT
11 581036 1HUB


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 14 
						

							
SIDE DEFLECTOR ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 02030700 4BOLT
2 00001800 4NUT
3 00776373 1SIDE DEFLECTOR PANEL
4 00776390 1SIDE DEFLECTOR STRAP
5 00002700 1WASHER


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 15 
						

							
OPERATOR PROTECT DOOR ASSEMBLY


ITEM PART NO. QTY.DESCRIPTION

1 00777341 1OPERATOR PROTECTIVE DOOR
2 00777338 2DOOR HINGE
3 00725334 1BASE PLATE
4 00725336 1STRAP
5 00725337 1PIN
6 00725335 1KEEPER
7 00777335 2U-BOLT
8 00777344 1DOOR HANDLE
9 00777346 1HINGE BAR WLDMT
10 380413C 10SAE FW #10
11 3264N9C 6PAN SCREW
12 3267N11C 4PAN SCREW
13 330214C 2HEX MACHINE NUT #10-32
14 00725338 1PIN COTTER 1/32X 1/2
15 00777340 1PACKAGE CARTON
16 00777339 1INSTALLATION DRAWING
17 6D9008 2SCREW
18 00775568 1FLAT SKID SHOE


SL60 (JULY-04)
Þ2004 Alamo Group Inc. Parts Section ± 16 
						

							LIMITED   WARRANTY
1. LIMITED WARRANTIES
1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or
municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser
(“Purchaser”) that the goods purchased are free from defects in material or workmanship.
1.02. Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be
defective under normal use and service due to defects in material or workmanship.
1.03. This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use,
negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or
lubricants, or which has served its normal life.  This limited warranty does not apply to any part of any internal
combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found
in your Operator’s Manual.
1.04. Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any
nature on behalf of Manufacturer.
2 . REMEDIES AND PROCEDURES.
2.01. This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer
within 30 days of purchase.
2.02. Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the
goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the
claim is based.
2.03. Purchaser is responsible for returning the goods in question to the Dealer.
2.04. If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and
service due to defects in material or workmanship, Manufacturer will:
( a ) Repair or replace the defective goods or part(s) or
( b ) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer)
if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty
by Manufacturer.
The choice of remedy shall belong to Manufacturer.
2.05. Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and
for returning the goods to the Dealer, whether or not the claim is approved.  Purchaser is responsible for the trans-
portation cost for the goods or part(s) from the Dealer to the designated factory.
3. LIMITATION OF LIABILITY.
3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES
WITH RESPECT  TO  THE  GOODS  INCLUDING,  BUT  NOT  LIMITED  TO, MERCHANTABILITY  AND FITNESS
FOR A PARTICULAR PURPOSE.
3.02. MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR
USE OF THE GOODS.
3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE
CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT
LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR  INCIDENTAL  DAMAGES RESULTING FROM
THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE
ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES
INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS.
3.04. NO ACTION  ARISING  OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER
THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS
OCCURRED.
4. MISCELLANEOUS.
4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County,
Texas.
4.02. Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall
be deemed to be a waiver of any other term.
4.03. If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
KEEP FOR YOUR RECORDS
ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine
identification when applying for warranty.
Alamo Industrial Implement Model____________________________Serial Number________________________________
Date Purchased__________________________________________Dealer______________________________________
ATTENTION:
READ YOUR OPERATORS MANUAL
ALAMO INDUSTRIAL
ALAMO INDUSTRIAL
An Alamo Group Company
1502 E. Walnut
Seguin, Texas 78155
830-379-1480