Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

USER GUIDE
Aleratec  
DVD/CD Stand-Alone Duplicators
Part No. 260155  ........1:1 DVD/CD Copy Cruiser Pro HS™
Part No. 260156  ........1:1 DVD/CD Copy Cruiser Pro HLS™
Part No. 260157  ........1:2 DVD/CD Copy Cruiser Pro HLX™ 

www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is sub\
ject to 
change without notice. 
This manual is copyright with all rights reserved. Under copyright laws,\
 this 
manual and the software described within may not be copied, except in th\
e 
normal use of the product(s) described within or to make a backup copy\
.Copyright© 2007
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
Aleratec™, 1:1 DVD/CD...

www.aleratec.com
Radio/TV Interference Statement
The equipment described in this guide emits radio frequency energy. If it is 
not installed in accordance with the manufacturer’s instructions, it may cause 
interference with radio or television reception.
This equipment has been tested and found to comply with the limits for a\
 Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a resid\
ential...

www.aleratec.com
Safety Regulations
WARNING
To prevent fire or shock hazard, do not expose the 
unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet. Refer servicing to authorized personnel 
only.
CAUTION
As the laser beam in these DVD/CD Duplicators 
is harmful to the eyes, do not  attempt to 
disassemble the cabinet. Refer servicing to 
authorized personnel only.
The use of optical instruments with this product 
will increase eye hazard.
This DVD/CD Duplicator is classified as...

www.aleratec.com
Table of Contents
Introduction ........................................................................\
..................... 2
Key Items – DVD/CD Duplicator  ................................................................. 2
Front Panel  ........................................................................\
............................. 3
DVD/CD Copy Cruiser Pro Display Panel  ....................................................4
Precautions...

www.aleratec.com 

www.aleratec.com1
Introduction
Thank you for purchasing this DVD/CD Duplicator. Please read this User Guide 
thoroughly before using this product.
Page 3 shows the front panel of the DVD/CD-ROM drive and the DVD/CD 
• 
Recorder used in the P/N 260155 and P/N 260156 DVD/CD Duplicators.
Note: The DVD/CD-ROM drive is the top drive. In the P/N 260157 DVD/CD 
Duplicator, both drives are DVD/CD Recorders.
Page 4 shows the Duplicator LCD Display Panel.
•  

www.aleratec.com
2
Introduction
Key Items – DVD/CD Duplicator
Note: Choose a Good Location
Allow adequate clearance for moving parts.
1. 
Do not place near heat sources such as radiators or air ducts, or in a p\
lace 
2. 
subject to direct sunlight, excessive dust, mechanical vibration or shoc\
k.
Good care will help assure maximum product life. Improper operating 
3. 
environment and misuse may void the warranty. 
Display Panel
DVD/CD-ROM Drive
or
DVD/CD Recorder
DVD/CD Recorder Power Switch 

www.aleratec.com3
Introduction
Front Panel
1  Disc Tray
This tray is for loading the disc. It will accept 120 mm and 80 mm discs\
. 
Please place the disc in the exact center of the tray.
2 Emergency Eject Pinhole
In the event of loss of power or failure to open the tray by pressing th\
e 
Eject button, insert the straightened end of a large paper clip or similar rigid 
object into the Emergency Eject hole to open the tray. 
3 Drive LEDs
This indicator lights up when data is being accessed or when data...

www.aleratec.com
4
ENT


www.aleratec.comESC
Introduction
DVD/CD Copy Cruiser Pro Display Panel
Display shows all functions and messages
1. 
ENT
2.   button is used to execute a selected function
ESC
3.   button is used to cancel a selected function
Up arrow is used to scroll up through functions or menus
4. 
Down arrow is used to scroll down through functions or menus
5. 
4
13
5
2