Home
>
Aleratec
>
Hard Disk
>
Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide
Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide
Have a look at the manual Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Aleratec 1:11 HDD Copy Cruiser IDE/SATA™ Hard Drive Duplicator and Sanitizer Part No. 350124 \037
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2013 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. Aleratec® is a registered trademark and 1:11 HDD Copy Cruiser IDE/SATA™ is a trademark of Aleratec, Inc. Check out Aleratec Online! • Blog.Aleratec.com • Facebook.com/Aleratec • Twitter.com/Aleratec • YouTube.com/Aleratec Please record the following information to help expedite any warranty claim: Model No. _________________________Serial No.________________________ Date Purchased _______________________________________________________ Place of Purchase _____________________________________________________
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy. If not installed and used in accordance with the instruction manual, this equipment may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an electrical outlet on a circuit that is different from the circuit to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non- approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and/or modifications made to this equipment, without the approval of manufacturer, could void the user’s authority to operate this equipment.
www.aleratec.com Safety Regulations WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only. Make sure that the manually switchable power supply is set to the proper voltage for your region.
www.aleratec.com Table of Contents Introduction ...................................................................................................1 Product Features ...................................................................................................1 Key Items .............................................................................................................2 1:11 HDD Copy Cruiser IDE/SATA Front Panel .................................................3 1:11 HDD Copy Cruiser IDE/SATA Copy Controller Display Panel and Buttons .....4 Duplicator Stand Installation Instructions ...........................................................4 Precautions ...................................................................................................5 Installation ............................................................................................................5 Choose a Good Location ......................................................................................5 Operation ..............................................................................................................5 Transportation ......................................................................................................5 Overview........................................................................................................6 Power Up Sequence .............................................................................................6 Main Menu ...........................................................................................................7 Subfunctions ........................................................................................................8 Using the 1:11 HDD Copy Cruiser IDE/SATA ...........................................10 Loading the Hard Drives ....................................................................................10 Removing Hard Drives ......................................................................................11 Main Menu .........................................................................................................13 Copy HDD .................................................................................................13 Async Copy HDD ......................................................................................15 Compare HDD ...........................................................................................16 Async Compare ..........................................................................................17 PreScan Source ..........................................................................................18 ReScan BUS...............................................................................................19 Source HDD Size .......................................................................................20 Secure Erase ...............................................................................................21 Overwrite ...................................................................................................23 Setup ..........................................................................................................25 Advanced Setup .........................................................................................37 Specifications .............................................................................................47 Troubleshooting .........................................................................................47 Technical Support ......................................................................................48 Service and Support...................................................................................49 Technical Support FAX Back Form ..........................................................52
www.aleratec.com1 Introduction Thank you for purchasing the 1:11 HDD Copy Cruiser IDE/SATA. Please read this User Guide thoroughly before using this product. Product Features The 1:11 HDD Copy Cruiser IDE/SATA is a Hard Disk Drive Duplicator and Hard Disk Drive Sanitizer. • Sanitizes/Wipes up to 12 drives clean with the choice of three Overwrite patterns: ▪Secure Erase ▪One Pass ▪Three Pass with Verify ▪Seven Pass per DoD 5220.22M • Supports 3.5” IDE HDDs and 3.5”/2.5” SATA HDDs • Copy from a SATA or IDE source drive to any combination of SATA and IDE targets • Supports 2.5” IDE HDDs, mSATA, Compact Flash (CF) Cards, CFast Cards, and 1.8” MicroSATA SSDs with optional Aleratec adapters, not included) 2.5” to 3.5” IDE Hard Drive Adapter 2-Pack 50mm mSATA SSD to SATA Adapter 2-Pack Aleratec Part # 350118 Compact Flash (CF) to SATA Adapter 2-Pack Aleratec Part # 350119 CFast to SATA Adapter 2-Pack Aleratec Part # 350120 MicroSATA to SATA Adapter Cable Bundle 6-Pack Aleratec Part # 350122
www.aleratec.com2 Introduction 1:11 HDD Copy Cruiser IDE/SATA Key Items Display Panel(see page 4) Power Switch Controller TargetDrive Bays (11) Source Drive Bay (1) Drive BayLocking Switches
www.aleratec.com3 Introduction 1:11 HDD Copy Cruiser IDE/SATA Front Panel 1 Drive Bays Drive bays for HDD trays. 2 Drive LEDs Each HDD bay has a green power light that will be on when there is an HDD properly inserted n the drive bay. Each HDD bay has a red drive activity light that will light when the HDD is being used. Do not remove a drive when this light is on, otherwise you may lose your data. 2 1
www.aleratec.com4 Introduction 1:11 HDD Copy Cruiser IDE/SATA Controller Display Panel and Buttons (Actual display may vary from illustration) 1. LCD display shows all functions and messages 2. ENT button is used to execute a selected function, or enter a menu 3. ESC button is used to cancel a selected function, or exit a menu 4. UP arrow is used to scroll backward through functions or menus 5. DOWN arrow is used to scroll forward through functions or menus ENT HDD Cruiser IDE/SATA1-11 ver: 4 13 5 2 ESC Duplicator Stand Installation Instructions 1. Front Stands 2. Back Stands