Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide

www.aleratec.com25
Us\bng the USB Dupl\bc\Cat\fr
6.5 Full Erase USB
Full Erase USB is a function what will erase all data on the target USB flash 
drive. 
N\fte: The Full Erase USB \iwill completely era\ise data of each of t\ihe target 
flash drives This fu\fctio\f will als\io clear the FAT table i\f the flash \idrive. 
You will \fot be able \ito read the flash d\irive o\f PC u\ftil it is\i re-formatted. 
 
1. Use UP or DOWN arrow to scroll through the menu until Utility is 
displayed on the LCD screen....

www.aleratec.com26
Us\bng the USB Dupl\bc\Cat\fr
6.7 Calc. Checksum
The Calculate Checksum function computes a checksum for the contents 
of the source drive. This alphanumeric can be used to ensure that no minor 
changes due to alteration or virus have occurred on the source drive since  
its last use.   
 
1. Use UP or DOWN arrow to scroll through the menu until Utility is 
displayed on the LCD screen. Press the OK button to select or press 
ESC to go to the next setting.
2. Press OK and scroll to...

www.aleratec.com27
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Setup
This function includes 8 subfunctions. These are: 
7.1 Start-up Menu
7.2 C\fpy Area
USB Dupl\bcat\fr
7. Setup
OK
ESC


7.3 Butt\fn Beep
7.4 Asyn H\fld T\bme
7.5 Ign\fre S\bze
7.6 Asynchr\fn\fus Enable/D\bsable
7.7 Language
7.8 W\frk\bng M\fde N\frmal/Turb\f    

www.aleratec.com28
Us\bng the USB Dupl\bc\Cat\fr
7.1 Startup Menu 
Startup Menu allows you to select which function displays first when the USB 
Duplicator is turned on. 
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy.
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press OK. 
2. Use the UP or Down arrow to scroll through the Setup options until Startup...

www.aleratec.com29
Us\bng the USB Dupl\bc\Cat\fr
7.3 Button Beep
This setting controls the button sound. 
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the OK. 
2. Use the UP or Down arrow to scroll through the Setup options until 
Button Beep is displayed on the LCD screen. 
3. Default setting is ON. Use the UP or DOWN arrows to select either ON 
or OFF. Press the OK button to change, or ESC to exit.
ESC
OK

7. Setup:
3. Butt\fn Beep
ESC
OK...

www.aleratec.com30
Us\bng the USB Dupl\bc\Cat\fr
7.4 Asyn Hold Time
This function allows you to set the time to exit Asynchronous Copying 
when you pull all the USB flash drives out of the duplicator. The default 
setting is 30 seconds. If after 30 seconds no new drives are plugged into 
the USB Duplicator the LCD will ask to exit Asynchronous or to stay in 
Asynchronous mode. Press OK to exit Asynchronous Copying or press 
ESC to keep this status. 
To change the default setting for Asyn Hold Time use...

www.aleratec.com31
Us\bng the USB Dupl\bc\Cat\fr
7.5 Ignore Size - continued 
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the OK button to select or press 
ESC to go to the next setting. 
2. Use the UP or Down arrow to scroll through the options until Ignore 
Size is displayed on the LCD screen. Press OK.
3. Default setting is 3% ; press the arrow keys to change and press OK.
N\fte: Source flash drive a\fd bla\fk drives \feed to be the same...

www.aleratec.com32
Us\bng the USB Dupl\bc\Cat\fr
7.6 Asynchronous (Enable/Disable)
This function allows the user to enable/disable asynchronous copying. Use 
Up and Down arrow keys to toggle between and push OK to select, or ESC 
to exit. 
7.7 Language
This function selects the language shown on the display (English, 
Traditional Chinese, Simplified Chinese, and Japanese). 
To change the default setting for Asyn Hold Time use the following 
procedure:
1. Use the UP or DOWN arrow to scroll through the...

www.aleratec.com33
Spec\bficat\b\fns
Operating Type• Stand-alone (No PC Required)
Number of Targets• 11
Supported Media• USB Flash/Pen Drive requiring less than 500mA 
from USB Port
Transfer Speed• 128MB/min Typical
Copy Mode• Synchronous or Asynchronous
LCD Display• 2 x 16 Backlit
Power Requirements• 115V or 230V
Operating Temperature• 41°F - 122°F
Operating Humidity • 15% - 90%  

www.aleratec.com34
Techn\bcal Supp\frt
After reading this User Guide, if you need additional assistance with this 
product, please contact Aleratec Technical Support. Our technical staff will 
be happy to assist you, but they may need your help to better assist you. 
Calling Aleratec Technical Support without all the necessary information 
can be both time consuming and frustrating. Therefore, please try to have 
the following information ready before calling:
1. Part Number - the part number is located...