Aleratec 115 Bluray DVD CD Tower Publisher SLS Duplicator User Guide

www.aleratec.com55
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Disadvantage:
 ▪The loading time may have an impact on overall duplication time for small 
duplication jobs.
 ▪The Master Disc will be loaded to the reserve partition in the Hard Drive 
temporarily until a new master is loaded and overrides the previous image. 
In comparing this duplication mode with the traditional “Duplication from 
Hard Drive” process, it offers the user more simplicity. By selecting the 
“Load and Copy” mode via one...

www.aleratec.com56
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Introd\fction to D\fp\Blication Mode - continued 
5. Press the ENT button once. You will see the following display:
6. Press the UP or DOWN button consecutively to select your desired mode.
7. Press the ENT button once to submit your selection. You will see the following 
display:
8. Press ESC button once to go back to the main menu. 
D\fplication Mode:A\ftoCOPYUSBPRINTSOURCE
ESCENT


Set\fp9. D\fplication Mode\BCOPYUSBPRINTSOURCE...

www.aleratec.com57
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Using AUTOCOPY
The “Autocopy” function allows you to copy from Disc to Disc automatically 
without pressing any keys. It is the simplest way to make BD/CD/DVD copies.  
The following tutorial will show you how to use this feature.
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press the ENT button to enter the “Autocopy” mode. You will see the following 
display:
3. Insert your Master Disc into the top Reader...

www.aleratec.com58
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Using AUTOCOPY - continued 
Note: It is normal \Bto see the progress i\Bndicator stay at 0-1\B0%  
and at 100% for ap\Bproximately 30 secon\Bds d\fring CD d\fplica\Btion. 
Additionally it is n\Bormal to see the pr\Bogress indicator stay\B at 
0-10% and at 100% \Bfor \fp to 1 min\fte \Bd\fring D\bD d\fplicati\Bon. 
There is a delay ca\f\Bsed by the initializ\Bing and finalizing \Bstage of 
disc d\fplication. D\f\Be to this delay, it is...

www.aleratec.com59
Men\f Overview
Men\f Overview
1.	Copy
This menu will guide you to make BD/DVD/CD copies. Before you enter this 
menu to copy, please make sure you have selected the correct Source drive. 
2.	Print
This menu will guide you to burn LightScribe labels.  Before you enter this 
menu to print, please make sure you have selected the correct Source drive.
3.	Copy	+	Print
This menu will guide you to make BD/DVD/CD copies and burn LightScribe 
labels.  When the BD/DVD/CD copies are finished,...

www.aleratec.com60
Men\f Overview
6.	Test	+	Copy
This menu will guide you to perform a simulation of the copying process. If 
everything passes the simulation, the copying process will be performed. If 
there’s an error encountered during the simulation, an error message will be 
displayed and the copying process will not be initiated.
7.	Copy	+	Compare
This menu will guide you to make copies and automatically perform a bit-by-
bit comparison between the Master Reading Source and all the copied discs...

www.aleratec.com61
Men\f Overview
13.	Mix	Audio	 Tracks
This menu will guide you through the “Mix Audio Tracks” feature. This feature 
helps you combine audio tracks from various CDs into a single customize audio 
CD. 
14.	Setup
14.1 Language
This setting allows you to choose which language you prefer to navigate 
this duplicator. Current supported languages are Spanish, and English.
14.2 Auto Start
This setting allows you to choose Auto, Full or Off.
When full is selected this feature will allow the...

www.aleratec.com62
Men\f Overview
14.	Setup - continued
14.4 CD Writing Mode
This setting allows you to select which mode you can duplicate a CD 
with. There are two different modes, “Disc at Once” and “Track at Once”. 
Unless you understand completely what they mean, we strongly suggest 
you to set it as “Disc at Once”.
14.5 Max Audio, VCD & CDG Speed
This setting allows you to adjust the maximum duplication speed for 
Audio and Video CD. Audio CD’s and Video CD’s do not have internal 
error checking...

www.aleratec.com63
Men\f Overview
14.11 DVD+R High Compatibility Mode
This feature allows you to enable/disable the DVD+R High Compatibility 
Mode feature by turning this feature ON or OFF. The purpose of this 
feature is to increase the compatibility of DVD+R media with a broader 
range of DVD Video players. This process will increase the amount of 
time required to duplicate your disc(s).
14.12 ISRC
This option allows you to enable/disable copying ISRC code of the 
Audio CD. ISRC is the serial# of the...

www.aleratec.com64
Men\f Overview
15.	Utilities - continued 
15.2 Prescan
This feature allows you to scan and detect any bad sectors existing in the 
Master Disc. It is recommended that you perform a Prescan before starting 
the duplication task for all Master Discs. Approximately 50% of failures 
reported by the duplicator are caused by errors in the Master Disc which 
the Reader couldn’t overcome. When this kind of failure occurs, it tends to 
waste all of your blank recordable medias. 
15.3 System...