Aleratec 121 USB Flash Drive Copy Cruiser Duplicator User Guide

www.aleratec.com7
Using the USB Duplication Suite Software
Once the drives, processes, and copies are specified, the user may click 
9. 
“Start” to begin the duplication process.
Progress is displayed through messages in the log and in the progress 
10. 
bar. Also, the number of completed and rejected copies is displayed 
underneath the output log. 

www.aleratec.com
8
Using the USB Duplication Suite Software
Data Copy Only - continued 
If the user wishes to cancel the duplication process at any time, just 
11. 
click “Cancel”. 

www.aleratec.com9
Using the USB Duplication Suite Software
Format Only
Format one or more USB flash drives with this command (FAT formatting 
only). A volume label to identify the media is added at the same time.
Note: The “Add File” interface will be disabled since it is not used.
Start by clicking on “Format Only” from the drop down menu. 
1. 
Click on the “Destination” tab located at the top of the window.
2.  

www.aleratec.com
10
Using the USB Duplication Suite Software
Format Only - continued 
Select the drives that you wish to format. You can click the button with 
3. 
the green “+” symbol to select all drives or the button with the r\
ed 
“-” symbol to deselect all drives. The button with the blue arrow will 
refresh the current list of drives.
You can specify a single label for each drive in the text box under 
4. 
“Enter Label”. If no label is specified, the label that the drive currently 
has will be used. 

www.aleratec.com11
Using the USB Duplication Suite Software
The “Processes” counter displays how many concurrent processes you\
 
5. 
want to run at once. The more processes you choose the more drives 
will be copied to simultaneously.
The “Copies” counter is the total number of copies you want to do.\
 If 
6. 
the number of copies specified is more than the number of available 
drive slots, the software will break up the job into multiple “rounds\
”, 
requiring the user to switch in new cards after each...

www.aleratec.com
12
Using the USB Duplication Suite Software
Format Only - continued 
Once the drives, processes, and copies are specified, the user may click 
7. 
“Start” to begin the duplication process.
Progress is displayed through messages in the log and in the progress 
8. 
bar. Also, the number of completed and rejected copies is displayed 
underneath the output log. 

www.aleratec.com13
Using the USB Duplication Suite Software
If the user wishes to cancel the duplication process at any time, just 
9. 
click “Cancel”. 

www.aleratec.com
14
Using the USB Duplication Suite Software
Format Then Data Copy
This function will format and then copy files/folders to one or more USB 
flash drives. Any files/folders on the target device(s) with the same names as 
any source files/folders will be overwritten.
Start by clicking on “Format Then Data Copy” from the drop down 
1. 
menu.
On the same screen, click “Add Files” to copy individual files or “Add 
2. 
Folder” to copy an entire folder. 

www.aleratec.com15
Using the USB Duplication Suite Software
If you wish to remove an added file or folder, select the item and click 
3. 
“Remove”. To clear the list of files/folders to add, click “Clear”.
If you wish to verify the source data is copied successfully, click to 
4. 
check the box next to “Verify Data”. 

www.aleratec.com
16
Using the USB Duplication Suite Software
Format Then Data Copy - continued 
Once you have added all the files/folders you want to copy, click the tab at 
5. 
the top of the window named “Destination”.
Select the drives that you wish to format. You can click the button with 
6. 
the green “+” symbol to select all drives or the button with the r\
ed 
“-” symbol to deselect all drives. The button with the blue arrow will 
refresh the current list of drives.