Aleratec 124 HDD Copy Cruiser HighSpeed Duplicator User Guide

							www.aleratec.com35
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Buzzer
This function controls whether the systems built-in buzzer enabled (turned on) or 
disabled (muted).
1. In the Setup menu, use the arrow buttons (or) to select “Buzzer”. The 
following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the Turn On and 
Mute options.  
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to turn on or mute the buzzer sound.
 

ESC
OK[ 6. Setup ] 6.6 Buzzer

ESC
OKTurn On

ESC
OKMute  
						

							www.aleratec.com36
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Language
This option allows you to select the language that is used for the display. 
1. Use the arrow buttons (or) select “Language”. The following screen 
will be displayed.  
2. Press OK to display the current language selection (the default language is 
English).  
3. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press OK to save it.

ESC
OK[ 6. Setup ] 6.7 Language

ESC
OKLanguageEnglish  
						

							www.aleratec.com37
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Advanced Setup
The “Advanced Setup” menu contains additional configuration options for the HDD 
Copy Cruiser High-Speed.  

ESC
OK[ 6. Setup ] 6.8 Advanced Setup  
						

							www.aleratec.com38
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Advanced Setup
A.			Wait	HDD	 Time		
This function uses the specified wait time before automatically starting the function 
that was selected.
A1. To edit the Wait HDD Time function, select “Wait HDD Time” and press 
OK. 
 
A2. The following information will be displayed.  

ESC
OK[ 6.8 Advanced Setup ]6.8.1 Wait HDD Time

ESC
OK[ Wait HDD Time ] 15 seconds  
						

							www.aleratec.com39
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Advanced Setup
B.			Copy	HPA	area		The HPA is a hidden data region defined in ATA/ATAPI-4. This area is not usually accessible to the operating system or software applications. The HDD Copy Cruiser High-Speed supports the copying of data from this hidden area.
B1. To edit the Copy HPA area function, select “Copy HPA area” and press 
OK. 
 
B2. The following options will be displayed.  
 
B3. Press OK to select your perfered option. After changing a setting, 
remember to press OK to save it. 

ESC
OK[ 6.8 Advanced Setup ] 6.8.2 Copy HPA area

ESC
OK[ Copy HPA Area ]No

ESC
OK[ Copy HPA Area ]Copy and Settings  
						

							www.aleratec.com40
Using the HDD Copy Cruiser High-Speed 
Main Menu
Setup - Restore Default
The Restore Default function will reset all settings to their original values.
1. In the Setup menu, use the arrow buttons (or) to select “Restore Default”. 
The following screen will be displayed. 
 
2. Press OK to select. The following screen will be displayed.
 
 
 
 
 
 
3. Press OK to clear the parameter to default settings.
 

ESC
OK[ 6. Setup ] 6.9 Restore Default

ESC
OKWarning:Clear Parameter To Default?  
						

							www.aleratec.com41
Specifications 
 
 
1:5 HDD Copy Cruiser High-Speed - Part Number: 350125
Operating Temperature:41°F to 122°F / 5°C to 50°C
Humidity:15% - 80% RH
Power Requirements100V-240V AC, 50/60Hz
Dimensions(depth x width x height)430 mm x 190 mm x 355 mm  (16.9” x 7.5” x 14”) 
Weight8.6 kg / 19 lb
 
1:11 HDD Copy Cruiser High-Speed - Part Number: 350126
Operating Temperature:41°F to 122°F / 5°C to 50°C
Humidity:15% - 80% RH
Power Requirements100V-240V AC, 50/60Hz
Dimensions(depth x width x height)416 mm x 191 mm x 648 mm  (16.375” x 7.5” x 25.2”) 
Weight14.7 kg / 32.5 lb
 
1:16 HDD Copy Cruiser High-Speed - Part Number: 350127
Operating Temperature:41°F to 122°F / 5°C to 50°C
Humidity:15% - 80% RH
Power Requirements100V-240V AC, 50/60Hz
Dimensions(depth x width x height)431.8 mm x 381 mm x 495.3 mm (17” x 15” x 19.5”) 
Weight30.8 kg / 68 lb
 
1:24 HDD Copy Cruiser High-Speed - Part Number: 350128
Operating Temperature:41°F to 122°F / 5°C to 50°C
Humidity:15% - 80% RH
Power Requirements100V-240V AC, 50/60Hz
Dimensions(depth x width x height)431.8 mm x 381 mm x 495.3 mm (17” x 15” x 19.5”) 
Weight30.8 kg / 68 lb  
						

							www.aleratec.com42
Troubleshooting
If your HDD Copy Cruiser High-Speed is not performing as expected, refer to the 
symptoms below, and follow the suggested corrective action. 
SymptomsCorrective Actions
LCD DisplayIf the LCD display does not display any message and the backlight is not lit after powering on the HDD Copy Cruiser High-Speed, check that the power cable is properly connected and that the ON/OFF switch is turned on.
Error MessagesWhile the system is performing an operation and the operation is manually terminated, an error message will be shown in the LCD display. This may lead to an failed operation and could cause the HDD Copy Cruiser High-Speed to stop responding. If this happens, power the unit off, wait about ten (10) seconds, and then reapply power.
Hard DiskIf the HDD Copy Cruiser High-Speed does not detect one of the hard disk drives, verify that the drive is properly seated in the drive bay.
Keypad ButtonsIf pressing the keys on the front panel produces no response from the system, the HDD Copy Cruiser High-Speed may still be busy with the previous operation. If the system is idle, power the unit off, wait about ten (10) seconds, and then reapply power.
Firmware UpdateThe device can be updated to new versions of firmware via a hard disk drive. If unable to update the firmware, check that the firmware was downloaded correctly. A failed firmware upgrade may cause the HDD Copy Cruiser High-Speed to become inoperable. If the system is working normally, do not attempt this operation. If the system is already experiencing problems, please contact Aleratec for repairs.
Startup/ShutdownDo not power off the system while it is performing an operation. After a normal shutdown, wait about ten (10) seconds before reapplying power.  
						

							www.aleratec.com43
Technical Support
After reading this User Guide, if you need additional assistance with this product, 
please contact Aleratec Technical Support. Our technical staff will be happy to assist 
you, but they may need your help to better assist you. 
Contacting support without all the necessary information can be both time 
consuming and frustrating. Therefore, please try to have the following information 
ready before calling:
1. Part Number - the part number is located on the bottom of the HDD Copy 
Cruiser High-Speed.
2. Serial Number - the serial number is located on the back of the HDD Copy 
Cruiser High-Speed.
3. Troubles/symptoms - please provide enough information about the issue so our 
technical staff can accurately diagnose it.
Technical Support Addresses and Phone Numbers
 XBy e-mail: [email protected]
 XBy Telephone: 1-818-678-0484		–		Skype:	support.aleratec.com
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, 
Monday through Friday, excluding U.S. holidays.
Please try to call from a phone near your Aleratec product.
 XAccess is available 24 hours a day, 365 days a year, via:
The World Wide Web at: www.aleratec.com
FAX at: 1-818-678-0483  
						

							www.aleratec.com44