Aleratec 124 HDD Copy Cruiser IDESATA HighSpeed WL User Guide

www.aleratec.com15
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Copy
The “Copy” function performs a copy from a source HDD to one or more target HDDs. 
The target HDDs must be at least as large as the source. The HDD Copy Cruiser IDE/
SATA High-Speed WL will copy every block of capacity on the source HDD. 
1. Load the source HDD and the target HDDs into the HDD Copy Cruiser IDE/
SATA High-Speed WL. The system will auto-detect the hard drives. After the 
drives have been detected, a screen...

www.aleratec.com16
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Copy - Continued
3. During the copy process the HDD Copy Cruiser IDE/SATA High-Speed WL 
will display progress information.
 
The amount of data remaining to be transferred (shown in gigabytes), and time 
will be displayed as the percentage of completion increases. 
Note: The copying speed, capacity and duration may vary from one hard drive to another. 
4. Once duplication is complete, a job status screen will be displayed....

www.aleratec.com17
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Compare
The “Compare” function performs a comparison of data from the source hard drive 
to the data on the target hard drives. 
1. With the source and target HDDs loaded use the arrow buttons (or) to 
select “Compare”. The following screen will be displayed. 
2. Press OK to begin the comparison. The system will auto-detect the hard drives.  
 
 
 
 
During the compare process, the HDD Copy Cruiser IDE/SATA High-Speed 
WL...

www.aleratec.com18
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Compare - Continued
3. When the comparison is completed, a job status screen will be displayed.

ESC
OKPass: 11  Fail: 0
Time: 20:18  

www.aleratec.com19
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Copy+Compare
The “Copy+Compare” function performs a copy and compare from a source HDD to 
one or more target HDDs. The target HDDs must be at least as large as the source. The 
HDD Copy Cruiser IDE/SATA High-Speed WL will copy every block of capacity on 
the source HDD. 
1. Load the source HDD and the target HDDs into the HDD Copy Cruiser IDE/
SATA High-Speed WL. The system will auto-detect the hard drives. After the 
drives...

www.aleratec.com20
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Copy+Compare - Continued
3. During the copy process the HDD Copy Cruiser IDE/SATA High-Speed WL 
will display progress information.
 
 
 
 
 
 
 
The amount of data remaining to be transferred (shown in gigabytes), and time 
will be displayed as the percentage of completion increases. 
Note: The copying speed, capacity and duration may vary from one source hard drive to another. 
4. Once duplication is complete, a job status...

www.aleratec.com21
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Overwrite
The “Overwrite” function will sanitize (wipe clean of all data) the hard disk drives 
connected to the HDD Copy Cruiser IDE/SATA High-Speed WL. 
1. Load up to 11 HDDs into the HDD Copy Cruiser IDE/SATA High-Speed WL. 
The system will auto-detect the hard drives. Using the arrow buttons (or) 
select “Overwrite”. The following screen will be displayed. 
Note: Overwriting the entire capacity of all connected hard...

www.aleratec.com22
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Overwrite
 A.			Quick	Overwrite	-	Continued
A3. The estimated time elapsed for the Quick Overwrite process will be displayed. 
        A4.  When the process is finished, the following screen will be shown. 
 
 
 
 
B.			Full	Overwrite
B1. To perform a Full Overwrite, scroll to “Full Overwrite” and press OK. The 
following screen will be displayed. 
B2. The loading pattern process for the Full Overwrite will be displayed. 
B3....

www.aleratec.com23
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
B.			Full	Overwrite	-	Continued
 
       B4. When the process is finished, the following screen will be shown.
 
 
 
 
 
 
Main Menu
Overwrite 
C.			3-Pass
C1. To perform a 3-Pass Overwrite, scroll to “3-Pass” and press OK. The 
following screen will be displayed. 
C2. The loading pattern process for the 3-Pass Overwrite will be displayed. 
C3. The estimated time elapsed for the 3-Pass Overwrite process will be displayed. 
 
C4. When...

www.aleratec.com24
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Overwrite 
D.			3-Pass	+	Verify
D1. To perform a 3-Pass Overwrite + Verify, scroll to “3-Pass Overwrite + 
Verify” and press OK. The following screen will be displayed. 
D2. The loading pattern process for the 3-Pass Overwrite + Verify will be 
displayed. 
D3. The estimated time elapsed for the 3-Pass Overwrite + Verify process will be 
displayed. 
   
D4. When the process is finished, the following screen will be shown. 
...