Aleratec 13 DVD CD LightScribe Duplicator SA User Guide

www.aleratec.com25
Stand-Alone LightScribe Duplicator SA: Tutorials
e. You now have the choice to load your Master Disc into a new (empty) 
partition or overwrite one of the existing partitions (if any exist) by 
inputting/modifying the name you desire; or you can simply choose “Auto 
Generate” to have the system automatically generate a partition name for 
you. Afterwards, simply press the UP or DOWN arrow button to find your 
desired selection and press ENT to submit your selection. You will see the...

www.aleratec.com26
Stand-Alone LightScribe Duplicator SA: Tutorials
Load Master Disc onto the Hard Drive - continued
h. Press ENT button to confirm. Once your Master Disc has been recognized. 
The loading progress indicator will be displayed and you will see the 
following:
i. Once your Master Disc has been loaded completely, you will see the 
following display:
Press the ENT button to go back to the “Hard Drive Setup” menu.
“4000MB” indicates the total capacity of your Master Disc.
“423MB” indicates the...

www.aleratec.com27
Stand-Alone LightScribe Duplicator SA: Tutorials
Rename Existing Hard Drive Partition Name
When you load your Master Disc to a hard drive partition, you are asked to give it a 
name. You can rename it at anytime afterwards (including the Reserved Partition). 
To rename your existing hard drive partition name, do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use...

www.aleratec.com28
Stand-Alone LightScribe Duplicator SA: Tutorials
Rename Existing Hard Drive Partition Name - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do the following:
a. Move the cursor to the forth position by pressing ENT until...

www.aleratec.com29
Stand-Alone LightScribe Duplicator SA: Tutorials
Delete Existing Hard Drive Partition Permanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Delete Partition” menu.  You will...

www.aleratec.com30
Stand-Alone LightScribe Duplicator SA: Tutorials
Delete Existing Hard Drive Partition Permanently - continued 
7. You will be directed back to the “Hard Drive Setup” menu. You will see the 
following display:
Hard Drive Setup4. Delete PartitionCOPYTESTPRINTSOURCE
ESCENT

      

www.aleratec.com31
Stand-Alone LightScribe Duplicator SA: Tutorials
How to Make Copies from the Hard Drive 
1. Load a master disc to the HDD if it is not already loaded (see page 24).
2. Go back to “COPY” Menu.
a. Press ENT button to go back to the main menu. You will see the following:
b. Use UP or DOWN arrow button to navigate to the following screen.
3. Start the Copy Process.
a. Now, please insert your blank discs into the Writer Trays (make sure the 
Reader Tray is empty) and press ENT button to...

www.aleratec.com32
Stand-Alone LightScribe Duplicator SA: Tutorials
You can select “No Counter” if you prefer to copy continuously with no 
interruption. (It will still count the number of copies, but it will not notify 
you when to stop.) To select the “No Counter”, simply press ENT button 
when you see the screen above. Then skip below and continue on to step 
“d”.
Or, you can select “Specify Counter” to specify the number of copies (1 to 
9999) by pressing the UP or DOWN navigation button to the below...

www.aleratec.com33
Stand-Alone LightScribe Duplicator SA: Tutorials
How to Make Copies from the Hard Drive - continued
vii. Press DOWN button consecutively until “1” is displayed.
viii. Now, we have “0021” displayed and then, press ENT once and the 
cursor is now moved to OK.
ix. Then, press ENT once to submit your counter value.
Now you will see following screen:
Note: If the ABOVE screen is displayed for more than 2 minutes, 
please check your Blank Discs for quality.
d. Please allow 5-10 seconds for...

www.aleratec.com34
Stand-Alone LightScribe Duplicator SA: Tutorials
Note: If the number of blank discs you inserted doesn’t match 
the number of discs detected on the screen, please give 10-15 
seconds for the duplicator to recognize all of your blank discs.
e. After 2 or 3 seconds of processing time, the following Copy Progress 
Screen will appear.
Note: It is normal to see the progress indicator stay at 0-10% and 
at 100% for approximately 30 seconds during CD duplication. 
Additionally it is normal to...