Home > Aleratec > Blu-ray Duplicator > Aleratec 17 Bluray DVD CD Tower LightScribe Publisher SLS User Guide

Aleratec 17 Bluray DVD CD Tower LightScribe Publisher SLS User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 17 Bluray DVD CD Tower LightScribe Publisher SLS User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							USER GUIDE
    Aleratec 1:7 Bl\f-ray/D\bD/CD
    Tower P\fblisher SLS™
    Part No. 260202
    U  
    						
    							www.aleratec.com
    Copyright/Model Ide\Bntification
    The content of this manual is for informational purposes only and is subject to 
    change without notice. 
    This manual is copyright with all rights reserved. Under copyright laws, this manual 
    and the software described within may not be copied, except in the normal use of the 
    product(s) described within or to make a backup copy.
    Copyright© 2011
    Aleratec, Inc.
    9851 Owensmouth Avenue
    Chatsworth, CA 91311 U.S.A. 
     
    Aleratec® is a registered trademark, and 1:7 Blu-ray/DVD/CD Tower Publisher 
    SLS™ is a trademark of Aleratec, Inc
    Check o\ft Aleratec Online!
    •	aleratec.com
    •	facebook.com/Aleratec
    •	twitter.com/Aleratec
    •	youtube.com/Aleratec
    Please record the following information to help expedite any warranty claim:
    Model No.  _________________________Serial No.________________________
    Date Purchased  _______________________________________________________ 
    Place of Purchase   _____________________________________________________  
    						
    							www.aleratec.com
    Radio/T\b Interferen\Bce Statement
    The equipment described in this guide emits radio frequency energy. If it is 
    not installed in accordance with the manufacturer’s instructions, it may cause 
    interference with radio or television reception.
    This equipment has been tested and found to comply with the limits for a Class 
    B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
    to provide reasonable protection against harmful interference in a residential 
    installation.
    This equipment generates, uses, and can radiate radio frequency ener gy. If not 
    installed and used in accordance with the instruction manual, this equipment may 
    cause harmful interference to radio communications. However, there is no guarantee 
    that interference will not occur in a particular installation. If this equipment does 
    cause harmful interference to radio or television reception, which can be verified 
    by turning the equipment off and on, the user is encouraged to try to correct the 
    interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment to an electrical outlet on a circuit that is different from 
    the circuit to which the receiver is connected.
    • Consult your dealer or an experienced radio/TV technician for help.
    This equipment has been certified to comply with the limits for a Class B computing 
    device, pursuant to FCC Rules. In order to maintain compliance with FCC 
    regulations, shielded cables must be used with this equipment. Operation with non-
    approved equipment or unshielded cables is likely to result in interference to radio 
    and TV reception. The user is cautioned that changes and/or modifications made to 
    this equipment, without the approval of manufacturer, could void the user’s authority 
    to operate this equipment.  
    						
    							www.aleratec.com
    Safety Reg\flations
    WARNING
    To prevent fire or shock hazard, do not expose the unit 
    to rain or moisture.
    To avoid electrical shock, do not open the cabinet. 
    Refer servicing to authorized personnel only.
    CAUTION
    As the laser beam in these 1:7 Blu-ray/DVD/CD Tower 
    Publisher SLS is harmful to the eyes, do not  attempt to 
    disassemble the cabinet. Refer servicing to authorized 
    personnel only.
    The use of optical instruments with this product will 
    increase eye hazard.
    This BD/DVD/CD Duplicator is classified as a CLASS 
    1 LASER PRODUCT.
    The CLASS 1 LASER PRODUCT label is located on 
    top of the internal drive enclosure. 
    CLASS 1
    LASER PRODUCT
    LASER KLASSE 1
    PRODUKT  
    						
    							www.aleratec.com
    Table of Contents
    Introd\fction ..................\B..................\B..................\B..................\B..................\B.........1
    Product Features ...................................................................................................1
    Key Items – 1:7 Blu-ray/DVD/CD Tower Publisher SLS  ...................................2
    1:7 Blu-ray/DVD/CD Tower Publisher SLS: LCD Front Panel ..........................3
    1:7 Blu-ray/DVD/CD Tower Publisher SLS: Removable Hard Disk Drive ........4
    Preca\ftions  ..................\B..................\B..................\B..................\B..................\B.........5
    Before you start: ...................................................................................................5
    Overview ..................\B..................\B..................\B..................\B..................\B..............7
    Unpacking the Unit  ..............................................................................................7
    Connect the Cables and Apply Power ..................................................................7
    LightScribe Software Installation  ........................................................................8
    Using the LightScribe Labeling Software ..........................................................13
    Other Label Printing Related Options ................................................................15
    Control Functions...............................................................................................16
    Stand-Alone Tower P\fblisher SLS: \BT\ftorials..................\B..................\B.......17
    Making Disc-to-Disc Copies ..............................................................................17
    Load Source Files onto the Hard Drive  .............................................................22
    Load Master Disc onto the Hard Drive ..............................................................24
    Rename Existing Hard Drive Partition Name ....................................................28
    Delete Existing Hard Drive Partition Permanently  ............................................30
    How to Make Copies from the Hard Drive ........................................................32
    Select Burn Speed  ..............................................................................................37
    Select the Source drive .......................................................................................39
    Change the SETUP Settings  ..............................................................................41
    Audio CD Editing ..............................................................................................42
    Introduction to Manage Accounts  .....................................................................50
    Manage Accounts: Overview  .............................................................................51
    Introduction to Duplication Mode  .....................................................................54
    Using AUTOCOPY ............................................................................................57
    Men\f Overview  ..................\B..................\B..................\B..................\B..................\B.59
    Tro\fbleshooting  ..................\B..................\B..................\B..................\B.................66
    Recommended Media \B ..................\B..................\B..................\B..................\B........70
    Technical S\fpport  ..................\B..................\B..................\B..................\B..............71
    Service and S\fpport\B ..................\B..................\B..................\B..................\B...........73
    Technical S\fpport FAX Back Form  ..................\B..................\B..................\B.....75  
    						
    							www.aleratec.com1
    Introd\fction
    Thank you for purchasing the 1:7 Blu-ray/DVD/CD Tower Publisher SLS. Please 
    read this User Guide thoroughly before using this product.
    Prod\fct Feat\fres
    The Aleratec 1:7 Blu-ray/DVD/CD Tower Publisher SLS is a stand alone 
    LightScribe disc publishing system with the capability of simultaneously producing 
    up to 7 BD/DVD/CD copies or 7 clearly labeled DVD/CD discs, and no computer is 
    required.
    • Removable Hard Disk Drive to store disc images and label files.*
    • Aleratec only USB fast key instantly connects Hard Drive to a PC.
    • BD/DVD/CD source drive for fast on the fly copies.
    • Laser burns disc labels.* 
    • Powerful Aleratec Disc Publishing Suite and LightScribe Labeling Software 
    included. 
     
    *Note: There is c\frrently no LightScribe Bl\f-ray media available.  
    						
    							www.aleratec.com2
    Introd\fction
    Key Items – 1:7 Bl\f-r\Bay/D\bD/CD Tower P\fblisher SLS
    *Note: There is c\frrently no LightScribe Bl\f-ray media available.
    Control Panel
    Removable  \fard Di\bc Drive(\bee page 4)
    BD/DVD/CD Source Drive
    BD/DVD/CD RW  LightScribe Drive\b*         
    						
    							www.aleratec.com3
    Introd\fction
    1:7 Bl\f-ray/D\bD/CD Tower P\fblisher SLS: \BLCD Front Panel
    (View may vary from picture)
    1. Display shows all functions and messages
    2. ESC button is used to cancel a selected function 
    3. ENT button is used to execute a selected function
    4. COPY	button will start the “Autocopy” menu function. (See page 59 for more 
    information)
    5. USB button will take you directly to the USB On/Off mode option. (See page 
    65 for more information)
    6. PRINT 	button will take you directly to the print menu. 
    7. SOURCE button will allow you to change the Source drive that the duplicator 
    uses for loading Master Discs.  The default for this option is the BD/DVD/CD 
    source drive.  (See page 33 for more information)
    8. UP arrow is used to scroll up through functions or menus
    9. DOWN arrow is used to scroll down through functions or menus
    ESC
    
    
    Initialize  D\fplicator1-7 ver: X.XX
    8
    13
    9
    2
    ENT
    COPYUSBSOURCEPRINT
    4567          
    						
    							www.aleratec.com4
    Introd\fction 
    1:7 Bl\f-ray/D\bD/CD Tower P\fblisher SLS: \BRemovable Hard Disk\B 
    Drive
    Your Tower Publisher SLS is equipped with a removable hard disk drive (HDD) for 
    storing images of frequently copied discs. Storing an image of a disc you want to copy 
    on an HDD improves duplication speed, and adds the convenience of not having to 
    look around for the actual source disc you want to copy.
    Your removable HDD provides extra security, in that you can remove the drive 
    containing the disc images and put it in a safe place where no un-authorized users can 
    copy or view the data.
    The removable HDD includes a keyed lock to protect the data on the drive from being 
    misused or stolen. The HDD is used in the copy process as described in the following 
    pages of this user guide.
    Note: You can u\be the dupl\bicator to copy dire\bctly from BD, DVD\b or\b CD\b with 
    or without the \fDD. \bJu\bt place your \bou\brce di\bc in the BD/DVD\b/CD \bource 
    drive or any of the\b BD/DVDRW writer\b.
    To remove the \fDD:
    1. Unlock the HDD by inserting the key and turning it left (counterclockwise) 1/4 
    turn. The drive is now in the unlocked position.
    2. Lift the HDD carriage lever upward and pull out. The HDD carriage will come 
    out of the tower and a protective drive bay door will close.
    To replace the \fDD:
    1. Align the HDD carriage with the door opening and push the drive carriage 
    through the protective drive bay door until you feel the drive seat in its connector.
    2. Push the HDD carriage lever down, then insert your key and turn it 1/4 turn to 
    the right (clockwise). The HDD is now in its locked position. You can remove 
    the key.
    Note: The \fDD will not wor\bk unle\b\b it i\b \becure\bd in po\bition with th\be carriage 
    lever and locked w\bith the key. Do not unlock the\b \fDD during operation\b, a\b you 
    will de\btroy any co\bpie\b you are making.\b
    Removable \fard Di\bk Drive
    Key in Lock
    Carriage Lever  
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec 17 Bluray DVD CD Tower LightScribe Publisher SLS User Guide