Aleratec 17 DVD CD Tower Publisher SLS Duplicator User Guide

www.aleratec.com15
Overview
Other Label Printing Related Options
There are other label printing related operations available as described below:
Menu 3: Copy+Print
This function allows you to perform the disc duplication then the disc labeling 
operation as part of one process.  Just flip the disc from the data side to the label   
side after each duplication pass.
To use this function, the data file required for duplication and the label file required 
for labeling will need to be preloaded onto the...

www.aleratec.com16
Overview
Control Functions
For detailed descriptions of each control function and feature see the Menu Overview 
section beginning on page 61 of this User Guide. 
Control Functions
1. Copy2. Print3. Copy + Print4. Test5. Compare6. Test + Copy7. Copy + Compare8. Select Burn Speed9. Select Source10. Erase11. Hard Drive Setup1. Select Partition2. Load Partition3. Rename Partition4. Delete Partition5. Partition Info6. Select Loading Drive7. Format Hard Drive12. Print Setup1. Load Label 2....

www.aleratec.com17
Overview
Windows Installation Procedures
Minimum System Requirements: PC running Windows 2000, XP, Vista, or 7
1. Install the Aleratec File System Manager.  First write down the key code 
labeled “Product Key” on the front of the disc and then put the disc into your 
PC.  If Autorun does not begin, go to “My Computer” and explore the CD and 
double-click “Setup” to begin the installer manually.  Follow the prompts and 
insert the key code that you wrote down where “Serial Number” is...

www.aleratec.com18
Overview
5. After the 1:4 Blu-ray/DVD/CD Tower Duplicator SA has rebooted, go to “My 
Computer” in Windows and look to see if the HDD is there.  It will be labeled 
as “Duplicator”.
6. If you open the drive location you will see three or four folders.
a. The “dup” folder is where  “.iso” files can be put in for disc burning.
b. The “label” folder is where “.lsi” files created by the LightScribe  Template 
Labeler program will be placed.  

www.aleratec.com19
Overview
Mac Software Installation Procedures
Supported Operating Systems: Mac OS X 10.5, 10.6, 10.7
Supported Hardware Architecture: Intel i386 and X86_64
1. Access Mac files on the included installation CD.
2. Double-click Aleratec File Copy.mpkg. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3. Follow the installer wizard instructions to install the Aleratec File Copy software. 
   

www.aleratec.com20
Overview
Mac Software Installation Procedures - continued 
4. After installation, Aleratec File Copy.app will be located in the Application 
folder of your system volume.  Or, you can type “Aleratec” from your Spotlight 
search as well. 
   

www.aleratec.com21
Stand-Alone Tower Publisher LS: Tutorials
Making Disc-to-Disc Copies
This process copies a Master Disc to several blank discs simultaneously. Due to 
the nature of simultaneous disc duplication, a good quality Master Disc and lower 
recording speeds maybe necessary to ensure high success and quality duplications 
rates.
1. Turn on the duplicator. After the duplicator has booted up, you will see the 
following display:
2. Make sure the Source Drive is set to the DVD-ROM drive.
It is...

www.aleratec.com22
Stand-Alone Tower Publisher LS: Tutorials
4. Start the Copy Process.
a. Insert your Master Disc and blank discs into their corresponding tray(s) and 
press the ENT button. You will see the following display:
b. “Duplication Mode” offers three choices:
 ▪Load and Copy
 ▪On the Fly
 ▪Prompt
Press UP or DOWN arrow button to display your desired mode. Press the 
ENT button to confirm.
c. “No Counter” can be used when you prefer to copy continuously with no 
interruption. (It will still...

www.aleratec.com23
Stand-Alone Tower Publisher LS: Tutorials
Making Disc-to-Disc Copies - continued 
Example:
To enter a value of 21 copies, do the following
Make sure the cursor is located at the first position:
i. Press DOWN button consecutively until “0” is displayed.
ii. Press ENT button once to move the cursor to the next position.
iii. Press DOWN button consecutively until “0” is displayed.
iv. Press ENT button once to move the cursor to the next position.
v. Press DOWN button consecutively until...

www.aleratec.com24
Stand-Alone Tower Publisher LS: Tutorials
Note: If either one of the PREVIOUS 2 screens are displayed for 
more than 2 minutes, please check your Master Disc or blank 
discs for quality.
d. Allow 5-10 seconds for the duplicator to detect both your Master Disc and 
blank discs. After your Master Disc and blank discs have been recognized, 
you will see the following display:
Note: “7” indicates there are 7 discs recognized by the Writer 
Tray. For this example, number of discs could be...