Aleratec 17 DVDCD Copy Tower Duplicator User Guide

							www.aleratec.com25
Using the DVD/CD Copy Tower
Main Menu
Utility – Track Edit
Edit Track is a function that allows you to create your own audio 
compilation CDs. Several tracks can be selected from different CDs and 
copied to one or more blank CDs. When copying audio CDs, it is highly 
recommended to copy at a speed of 16x or lower to ensure good quality 
audio reproduction. Go to “Setup” and then “Burning Speed” to change 
copy speed before selecting tracks.
This function includes 3 subfunctions. These are:  
 
 
 
 
 
 
 
 
1.  Using the arrow buttons (or) select “Track Edit”. Press the  OK 
button to select or press  ESC to go to the next setting. 
 
  
2. Press OK to select. The following information will be displayed.
3.  Use the arrow buttons (or) to scroll between the Track Edit 
subfuctions: Copy Track, Close Disc, Disc Info.  
7.4 Track Edit
7.4.1 Copy Track
7.4.2 Close Disc
7.4.3 Disc Info
[Utility]
4. Track Edit
[Track Edit]
1. Copy Track  
						

							www.aleratec.com
26
Using the DVD/CD Copy Tower
Main Menu
Utility – Track Edit
 A.			Copy	 Track
This function is used to combine audio tracks from various CDs into a 
single customized audio CD.   
B.			Close	Disc
Selecting “Close Session” will finalize the CD; no further data can be 
added. This function will make the disc readable on a normal CD player. 
C.			Disc	Info
Selecting “Disc Info” will check the audio CD’s status of usage.  
						

							www.aleratec.com27
Using the DVD/CD Copy Tower
Main Menu
Utility – Eject All Disc
This setting controls the ejection of discs by the DVD Recorders. 
1. Using the arrow buttons (or) select “Eject All Disc”. The following 
screen will be displayed. Press the  OK button to eject all discs, or press 
ESC to exit.
 
 
 
 
2.  After pressing the OK button, all disc drive doors will open.
[Utility]
5. Eject All Disc  
						

							www.aleratec.com
28
Using the DVD/CD Copy Tower
Main Menu
Utility – Copy Counter
The disc counter can be set to count discs for each job. The LF counter 
shows the total number of discs produced in the life of the duplicator and 
cannot be reset.
This function includes 3 subfunctions. These are:  
 
 
 
 
 
 
 
1.  Using the arrow buttons (or) select “Copy Counter”. Press the  OK 
button to select or press  ESC to go to the next setting. 
 
  
2. Press OK to select. The following information will be displayed.
3.  Use the arrow buttons (or) to scroll between the Copy Counter 
subfuctions: Show Count, Enable Counter, Clear Counter.  
[Utility]
6. Copy Counter
[Copy Counter]
1. Show Count
7.6 Copy Counter
7.6.1 Show Count
7.6.2 Enable Counter
7.6.3 Clear Counter  
						

							www.aleratec.com29
Using the DVD/CD Copy Tower
Main Menu
Utility – Copy Counter
 A.			Show	Count
This function is used to check how many disc copies have succeeded or 
failed. 
 A1. Using the arrow buttons (or) select “Show Count” then press  
  the OK button, or ESC to exit.
 
 
 
 
  A2. The number of passed (P) and failed (F) CD and DVD drives will  
  be displayed.
[Copy Count]
1. Show Count
   CD    P0         F0
DVD    P0         F0  
						

							www.aleratec.com
30
Using the DVD/CD Copy Tower
Main Menu
Utility – Track Edit
 B.			Enable	Counter
This function will allow you to enable or disable the record of the copy 
result.
  B1. Using the arrow buttons (or) select “Enable Counter” then  
  press the OK button, or ESC to exit.
  B2. Use the arrow buttons (or) to select Enable or Disable.
 
 
 
 
 
 B3. Press the OK button again to save your setting.
[Copy Counter]
2. Enable Counter
[Enable Counter]
        Disable
[Enable Counter]
        Enable  
						

							www.aleratec.com31
Using the DVD/CD Copy Tower
Main Menu
Utility – Track Edit
 C.			Clear	Counter
This function will allow you to delete the record.
 C1. Using the arrow buttons (or) select “Clear Counter” then    
press the OK button, or press ESC to exit.
  C2. Press the OK button to clear the count, or press  ESC to exit.
  C3. After pressing the OK button, the process will begin.
[Copy Counter]
3. Clear Counter
>>> Warning 
						

							www.aleratec.com
32
Using the DVD/CD Copy Tower
Main Menu
Utility – Update BIOS
Before attempting to use this feature, please contact Aleratec Support.
1.  Use the arrow buttons (or) to select “Update BIOS”. The following 
screen will be displayed. Press the  OK button to continue.
 
2. The system will detect the update file and execute the update task 
automatically. 
 
 
 
3.  Once the update job has finished, the system will require you to reboot.
[Utility] 
7. Update BIOS
Update Firmware
                      20%
TURN OFF, WAIT 5
Seconds, TURN ON  
						

							www.aleratec.com33
Overview
Main Menu
Setup
The main menu “Setup” function has 9 subfunctions. These are:
8.1 Auto Start Time
8.2 Display Mode
8.3 Button Beep
8.4 Eject On Start
8.5 Reader Speed
8.8 Clear Setup
8. Setup
8.2.1 Show Speed
8.2.2 Basic
8.2.3 Show Timer
8.4.1 Eject All Discs
8.4.2 Do Not Eject
8.4.3 Eject Target Only
8.4.4 Eject Source Only
8.6 Compare Speed
8.7 Language
8.4.5 Eject All Trays
8.9 Advanced Setup    
           
8.5.1 CD 1 to Max
8.5.2 DVD 1 to Max
8.6.1 CD 1 to Max
8.6.2 DVD 1 to Max  
						

							www.aleratec.com
34
Using the DVD/CD Copy Tower
Main Menu
Setup – Auto Start Time
The “Auto Start Time” function will allow the system to perform the Copy, 
Test, Compare and Copy + Compare fuctions automatically. 
1.  Using the arrow buttons (or) select “Auto Start Time” then    
press the OK button, or press ESC to exit.
 
  
2. Use the arrow keys (or) to select the number of seconds for the 
Auto Start Time .
[Setup] 
1. Auto Start Time
[Auto Start Time]
           5 Seconds