Home > Aleratec > Blu-ray Duplicator > Aleratec 18 Bluray DVD CD Tower Duplicator SA User Guide

Aleratec 18 Bluray DVD CD Tower Duplicator SA User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 18 Bluray DVD CD Tower Duplicator SA User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							USER GUIDE
    Aleratec 1:8 Blu-ray/DVD/CD 
    Tower Duplicator SA™
    Part No. 260205
    \037  
    						
    							www.aleratec.com
    Copyright/Model Identification
    The content of this manual is for informational purposes only and is subject to 
    change without notice. 
    This manual is copyright with all rights reserved. Under copyright laws, this manual 
    and the software described within may not be copied, except in the normal use of the 
    product(s) described within or to make a backup copy.
    Copyright© 2014
    Aleratec, Inc.
    9851 Owensmouth Avenue
    Chatsworth, CA 91311 U.S.A. 
     
    Aleratec® is a registered trademark, and 1:8 Blu-ray/DVD/CD Tower Duplicator 
    SA™ is a trademark of Aleratec, Inc
    Check out Aleratec Online!
    •	Blog.Aleratec.com
    •	Facebook.com/Aleratec
    •	Twitter.com/Aleratec
    •	YouTube.com/Aleratec
    Please record the following information to help expedite any warranty claim:
    Model No.  _________________________Serial No.________________________
    Date Purchased  _______________________________________________________ 
    Place of Purchase   _____________________________________________________  
    						
    							www.aleratec.com
    Radio/TV Interference Statement
    The equipment described in this guide emits radio frequency energy. If it is 
    not installed in accordance with the manufacturer’s instructions, it may cause 
    interference with radio or television reception.
    This equipment has been tested and found to comply with the limits for a Class 
    B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
    to provide reasonable protection against harmful interference in a residential 
    installation.
    This equipment generates, uses, and can radiate radio frequency ener gy. If not 
    installed and used in accordance with the instruction manual, this equipment may 
    cause harmful interference to radio communications. However, there is no guarantee 
    that interference will not occur in a particular installation. If this equipment does 
    cause harmful interference to radio or television reception, which can be verified 
    by turning the equipment off and on, the user is encouraged to try to correct the 
    interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment to an electrical outlet on a circuit that is different from 
    the circuit to which the receiver is connected.
    • Consult your dealer or an experienced radio/TV technician for help.
    This equipment has been certified to comply with the limits for a Class B computing 
    device, pursuant to FCC Rules. In order to maintain compliance with FCC 
    regulations, shielded cables must be used with this equipment. Operation with non-
    approved equipment or unshielded cables is likely to result in interference to radio 
    and TV reception. The user is cautioned that changes and/or modifications made to 
    this equipment, without the approval of manufacturer, could void the user’s authority 
    to operate this equipment.  
    						
    							www.aleratec.com
     
     
     
    CAUTION
    As the laser beam in these 1:8 Blu-ray/DVD/CD Tower 
    Duplicator SA is harmful to the eyes, do not  attempt to 
    disassemble the cabinet. Refer servicing to authorized 
    personnel only.
    The use of optical instruments with this product will 
    increase eye hazard.
    This BD/DVD/CD Duplicator is classified as a CLASS 
    1 LASER PRODUCT.
    The CLASS 1 LASER PRODUCT label is located on 
    top of the internal drive enclosure. 
    CLASS 1
    LASER PRODUCT
    LASER KLASSE 1
    PRODUKT
    Safety Regulations
    WARNING
    To prevent fire or shock hazard, do not expose the unit 
    to rain or moisture.
    To avoid electrical shock, do not open the cabinet. 
    Refer servicing to authorized personnel only. 
     
    Make	sure	that	the	manually	switchable	power	
    supply	is	set	to	the	proper	voltage	for	your	region.  
    						
    							www.aleratec.com
    Table of Contents
    Introduction ...................................................................................................1
    Product Features ...................................................................................................1
    Key Items – 1:8 Blu-ray/DVD/CD Tower Duplicator SA  ...................................2
    1:8 Blu-ray/DVD/CD Tower Duplicator SA: LCD Front Panel ..........................3
    1:8 Blu-ray/DVD/CD Tower Duplicator SA: Removable Hard Disk Drive .............4
    Precautions  ...................................................................................................5
    Before you start: ...................................................................................................5
    Overview........................................................................................................7
    Unpacking the Unit  ..............................................................................................7
    Connect the Cables and Apply Power ..................................................................7
    Control Functions.................................................................................................8
    Windows Installation Procedures .........................................................................9
    Tower Duplicator SA: Tutorials ..........................................................11
    Making Disc-to-Disc Copies ..............................................................................11
    Load Source Files onto the Hard Drive  .............................................................16
    Load Source Files onto the Hard Drive for Windows ........................................17
    Load Master Disc onto the Hard Drive  ..............................................................18
    Rename Existing Hard Drive Partition Name ....................................................22
    Delete Existing Hard Drive Partition Permanently  ............................................24
    Choose Hard Drive Partition Display Order  ......................................................26
    How to Make Copies from the Hard Drive ........................................................28
    Select Burn Speed  ..............................................................................................33
    Select the Source drive .......................................................................................35
    Change the SETUP Settings  ..............................................................................37
    Audio CD Editing ..............................................................................................38
    Introduction to Manage Accounts  .....................................................................46
    Manage Accounts: Overview  .............................................................................47
    Introduction to Duplication Mode  .....................................................................50
    Using AUTOCOPY ............................................................................................53
    Menu Overview  ....................................................................................55
    Troubleshooting  .........................................................................................62
    Recommended Media ................................................................................66
    Technical Support ......................................................................................67
    Service and Support...................................................................................68
    Technical Support FAX Back Form  ..........................................................71  
    						
    							www.aleratec.com1
    Introduction
    Thank you for purchasing the 1:8 Blu-ray/DVD/CD Tower Duplicator SA. Please 
    read this User Guide thoroughly before using this product.
    Product Features
    The Aleratec 1:8 Blu-ray/DVD/CD Tower Duplicator SA is a stand alone disc 
    duplication system with the capability of simultaneously producing up to 8 BD/
    DVD/CD copies, and no computer is required.
    • Removable Hard Disk Drive to store disc images.
    • Aleratec only USB fast key instantly connects Hard Drive to a PC.
    • USB 3.0/2.0 connection for fast loading of image files from a PC.
    • Duplicate from ISO image files, NRG image files, or even directories and files 
    not packaged into a disc image file* 
     
    * Duplicating from folders on the Duplicator HDD is only supported for CDs and DVDs.  
    						
    							www.aleratec.com2
    Introduction
    Key Items – 1:8 Blu-ray/DVD/CD Tower Duplicator SA
    LCD Control Panel
    Removable  Hard Disk Drive(see page 4)
    BD/DVD/CD Source and RW Drive
    BD/DVD/CD RW Drives*        
    						
    							www.aleratec.com3
    Introduction
    1:8 Blu-ray/DVD/CD Tower Duplicator SA: LCD Control Panel
    (View may vary from picture)
    1. Display shows all functions and messages
    2. ESC button is used to cancel a selected function 
    3. ENT button is used to execute a selected function
    4. COPY	button will start the “Autocopy” menu function. (See page 59 for more 
    information)
    5. USB button will take you directly to the USB On/Off mode option. (See page 
    65 for more information)
    6. PRESCAN	button allows you to scan and detect any bad sectors existing in the 
    Master Disc. 
    7. SOURCE button will allow you to change the Source drive that the duplicator 
    uses for loading Master Discs.  The default for this option is the BD/DVD/CD 
    source drive.  (See page 33 for more information)
    8. UP arrow is used to scroll up through functions or menus
    9. DOWN arrow is used to scroll down through functions or menus
    ESC
    
    
    Initialize  Duplicator1-8 ver: X.XX
    8
    13
    9
    2
    ENT
    COPYUSBSOURCEPRESCAN
    4567          
    						
    							www.aleratec.com4
    Introduction 
    1:8 Blu-ray/DVD/CD Tower Duplicator SA: Removable Hard Disk 
    Drive
    Your Duplicator SA is equipped with a removable hard disk drive (HDD) for storing 
    images of frequently copied discs. Storing an image of a disc you want to copy on 
    an HDD improves duplication speed, and adds the convenience of not having to look 
    around for the actual source disc you want to copy.
    Your removable HDD provides extra security, in that you can remove the drive 
    containing the disc images and put it in a safe place where non-authorized users can 
    copy or view the data.
    The removable HDD includes a keyed lock to protect the data on the drive from being 
    misused or stolen. The HDD is used in the copy process as described in the following 
    pages of this user guide.
    Note: You can use the duplicator to copy directly from BD, DVDs or CDs 
    with or without the HDD. Just place your source disc in the BD/DVD/CD 
    source drive or any of the BD/DVDRW writers.
    To remove the HDD:
    1. Unlock the HDD by inserting the key and turning it left (counterclockwise) 1/4 
    turn. The drive is now in the unlocked position.
    2. Lift the HDD carriage lever upward and pull out. The HDD carriage will come 
    out of the tower and a protective drive bay door will close.
    To replace the HDD:
    1. Align the HDD carriage with the door opening and push the drive carriage 
    through the protective drive bay door until you feel the drive seat in its connector.
    2. Push the HDD carriage lever down, then insert your key and turn it 1/4 turn to 
    the right (clockwise). The HDD is now in its locked position. You can remove 
    the key.
    Note: The HDD will not work unless it is secured in position with the 
    carriage lever and locked with the key. Do not unlock the HDD during 
    operation, as you will destroy any copies you are making.
    Removable Hard Disk Drive
    Key in Lock
    Carriage Lever  
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec 18 Bluray DVD CD Tower Duplicator SA User Guide