Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide

www.aleratec.com15
Using the DVD/CD Duplicator
Main Menu
Test & Copy
This function will run Test described above before automatically starting the 
Copy Function. 
Note: Test & Copy is not supported by DVD+R/RW discs.
Press the 
1.  ENT button to start the test and copy process. Before starting 
the Copy function, the Test function as described above will be 
performed.
When testing is completed, the duplicator will start writing data onto 
2. 
the DVD/CD-R/RW disc. 
When the process is completed, the...

www.aleratec.com
16
Using the DVD/CD Duplicator
Main Menu
Verify
This function will verify that the disc copies can be read correctly in \
a 
DVD/CD-ROM after duplication. Leave the source disc in the DVD/CD-
ROM, and the duplicate disc in the DVD/CD-Recorder will be verified 
simultaneously.
Press the 
1.  ENT button to start disc verifying, or press  ESC to exit.
The LCD will display the status of the verification.
2. 
When the process is completed, the LCD will display the result.
3. 
4. Verify
...

www.aleratec.com17
Using the DVD/CD Duplicator
Main Menu
Compare
This function will compare the data on the source disc to the target discs 
after disc copy.
Press the 
1.  ENT button to do the disc compare, or press  ESC to exit. 
Press the ENT button again to show detailed “Compare” information. 
The LCD display shows information for the source.
When the comparison is completed, the LCD will display the result.
2. 
Press 
3.  ENT again for the status of each copy.
If the compare result is identical,...

www.aleratec.com
18
Using the DVD/CD Duplicator
Main Menu
Compare - continued 
If the comparison fails, the LCD will display the number of discs that 
5. 
failed and passed.
Press the 
6.  ENT button again for the status of each copy.
If the comparison fails, the LCD will display the reason for the failure\
.
7. 
Compare  OK: 2
Fail: 1  Diff: 0

ESCENT
Src: 01 DVD/CD-ROM
Total:  0 Bytes

ESCENT
Src: 02 DVD/CD-RW
TOC not match

ESCENT 

www.aleratec.com19
Using the DVD/CD Duplicator
Main Menu
Prescan
This function will scan the source disc and determine if it can be read \
correctly and test the reading speed. The reading speed of the source disc 
should be higher than the writing speed for the target disc(s).
Press the 
1.  ENT button to prescan the disc, or press  ESC to exit.
The LCD will display the status of the prescan.
2. 
If a disc can be read correctly, the LCD will display OK.
3. 
If it cannot read the source disc correctly,...

www.aleratec.com
20
Using the DVD/CD Duplicator
Main Menu
Disc Info
This function will show the track information of the source disc.
Press the 
1.  ENT button to show the disc information, or press	ESC to exit.
The LCD will display the results of the disc information.
2. 
Press the 
3.  ENT button again and the LCD will display the time and 
capacity of the source disc.
Press the 
4.  ENT button again, and use the arrow keys to display 
information on the sessions.
Press the 
5.  ENT button again, and...

www.aleratec.com21
Using the DVD/CD Duplicator
Main Menu
Select Source
 (Not	supported)
Image (Not	supported) 

www.aleratec.com
22
Using the DVD/CD Duplicator
Main Menu
Edit Track
Edit Track is a function that allows you to create your own audio 
compilation CDs. Several tracks can be selected from different CDs and 
copied to one or more blank CDs. When copying audio CDs, it is highly 
recommended to copy at a speed of 16x or lower to ensure good quality 
audio reproduction. Go to “Setup” and then “Burning Speed” t\
o change 
copy speed before selecting tracks.
This function includes 4 subfunctions. These are:...

www.aleratec.com23
Using the DVD/CD Duplicator
Main Menu
Edit Track
10.1	CD	to	CD	Edit
Insert a Source CD into the DVD/CD-ROM and the blank disc in the 
1. 
DVD/CD-Recorder.
Use 
2.  UP Arrow or DOWN Arrow to scroll through the menu until “Edit 
Track” is displayed on the LCD screen. Press the  ENT button to select 
or press ESC to go to the next setting.
Select “CD to CD Edit” displayed on the LCD screen.
3. 
Press 
4.  ENT and scroll to “Select Track” to select the track you want to 
copy. Press the...

www.aleratec.com
24
Using the DVD/CD Duplicator
Main Menu
Edit Track
10.1	CD	to	CD	Edit	- continued 
Repeat for all tracks you want to copy. Then use the arrow keys to move 
5. 
to END, then press the ENT button to finish disc editing. Use the arrow 
keys to make YES or NO selection. Select YES by pressing the ENT 
button.
The LCD will display the status of the copying process. At the completion 
6. 
of the copying process, the LCD will display the “Burn Complete!” \
message. Press the ENT button to...