Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide

							www.aleratec.com25
Using the DVD/CD Duplicator
When you have finished and the display shows: “Continue Edit”, Next 
8. 
Disc? Yes”, use the arrow keys to make YES or NO selection. Select NO.
The system will ask to close the disc session. “Close all disc’s session? 
9. 
Yes”. Use the arrow keys to make YES or NO selection. Select YES.
LCD display will show the process of closing the session: “Closing 
10. 
Session Please Wait —”. 
Note: You will NOT be able to use the new audio CD until you close the 
session.
When the session is closed, this message will be displayed.
11. 
Continue edit
next Disc?  No

ESCENT
Close all disc’s
session?  Yes

ESCENT
Closing Session
Please wait - - -

ESCENT
Closing Complete
OK:03  Fail:0

ESCENT 
						

							www.aleratec.com
26
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
10.2	(Not	supported)
10.3	Play	 Audio	Track
By selecting “Play Audio” you can play music with your 1:2 DVD/CD 
Copy Cruiser Pro HLX Win/Mac. You can connect headphones or speakers 
to the headphone jack on the DVD/CD-ROM or the speaker jacks on the 
back of the unit. Load the CD you want to play in that drive and press the 
1.  ENT button to 
play music. Press ESC to index to the next setting.
10-03 Edit Track
Play Audio Track

ESCENT
Select Track
1/10  04:25

ESCENT
Playing Track-1
00:00 / 03:35

ESCENT 
						

							www.aleratec.com27
Using the DVD/CD Duplicator
10.4	Close	Session
Selecting “Close Session” will finalize the disc; no further data can be 
added. This function will make the disc readable on a normal CD player.
Press the 
1.  ENT button to enter the setting, or press  ESC to index to the 
next setting.
The system will ask to close the disc session. “Close all disc’s session? 
2. 
Yes”. Use the arrow keys to make  YES or NO selection. Select YES.
LCD display will show the process of closing the session: “Closing 
3. 
Session Please Wait —”.
When the session is closed, this message will show the passed and 
4. 
failed discs.
10-04 Edit Track
Close Session

ESCENT
Close all disc’s
session? Yes

ESCENT
Close Session
Please Wait---

ESCENT
Close Complete
OK:03  Fail:0

ESCENT 
						

							www.aleratec.com
28
Using the DVD/CD Duplicator
Main Menu
Setup
You can change the original default settings using this setup menu. There 
are different settings to control the duplicator’s operation. In general, using 
the original default settings for optimal performance is suggested.
This function includes 18 subfunctions. These are:
1 1.01 Language
11.02 CD Burn Speed
11.03 DVD Burn Speed
11.04 Read Speed (max.)
11.05  Auto Start Drive
11.06 Startup Menu
11.07  Auto V erify*
11.08  Auto Compare*
11.09  Auto Prescan*
11.10 Eject Disc*
11.1 1 Burn On The Fly*
11.12 Burn Mode*
11.13 Display T ime
11.14 Button Sound*
11.15 Device Info (Not supported) 
11.16 System Info
11.17 Quick Erase Disc
11.18 Full Erase Disc
11. SetupENT
�
�ESC 
						

							www.aleratec.com29
Using the DVD/CD Duplicator
11.01	Language	(Optional)
This function selects the language shown on the display (English, 
Traditional Chinese, Simplified Chinese, and Japanese). 
To select, press the 
1.  ENT button, or ESC to exit.
11.02	CD	Burn	Speed
This setting controls the maximum CD writing speed of the DVD/CD-
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high 
failure rate due to poor CD quality or unstable CD writing due to high 
speed. Lowering the writing speed will increase the probability of makin\
g 
successful copies. Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired speed, then press the 
2.  ENT 
button. 
11-01. Setup
Language

ESCENT
11-02. Setup
CD Burn Speed

ESCENT
CD Burn Speed
Auto

ESCENT 
						

							www.aleratec.com
30
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.03	DVD	Burn	Speed
This setting controls the maximum DVD writing speed of the DVD/CD 
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high fa\
ilure 
rate due to poor CD quality or unstable CD writing due to high speed. Lo\
wering 
the writing speed will increase the probability of making successful cop\
ies.
Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired speed, then press the 
2.  ENT 
button.
11.04	Read	Speed
This function sets the reading speed of the source DVD/CD-ROM. Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired reading speed, then press th\
e 
2. 
ENT button.
11-03. Setup
DVD Burn Speed

ESCENT
DVD Burn Speed
Auto

ESCENT
11-04. Setup
Read Speed

ESCENT
Read Speed
Maximum

ESCENT 
						

							www.aleratec.com31
Using the DVD/CD Duplicator
11.05	Auto	Start	Drive
The function of the Auto Start Drive is to copy or test automatically once blank 
discs are loaded into recorders.  Default setting is 
1.  OFF. Press ENT button to change, or  ESC to exit. 
11.06	Startup	Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is “Copy”. Use the arrow buttons to select the desired item (1 - 11), then press the 
1. 
ENT button.
11-05. Setup
Auto Start Drive

ESCENT
Auto Start Drive
Off

ESCENT
11-06. Setup
Startup Menu

ESCENT
Startup Menu
1.Copy

ESCENT 
						

							www.aleratec.com
32
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.07	 Auto	Verify
This setting controls auto verify of the target discs. Default setting is 
1.  OFF; press the ENT button to change, or ESC to exit.
11.08	 Auto	Compare
This setting controls auto compare of data between source and target discs 
after copying. Default setting is 
1.  OFF; press the ENT button to change, or ESC to exit.
11-07. Setup
Auto Verify

ESCENT
Auto Verify
Off

ESCENT
11-08. Setup
Auto Compare

ESCENT
Auto Compare
Off

ESCENT 
						

							www.aleratec.com33
Using the DVD/CD Duplicator
11.09	Auto	Prescan
This setting controls auto prescan of the master to verify that it can b\
e read 
properly, and also tests the reading speed. Default setting is 
1.  OFF; press the ENT button to change, or ESC to exit.
11-09. Setup
Auto Prescan

ESCENTAuto Prescan
Off

ESCENT
11-09. Setup
Auto Prescan

ESCENT 
						

							www.aleratec.com
34
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.10	Eject	Disc
This setting controls the ejection of discs by the DVD/CD-Recorder. Three 
options are available: “Eject Good Only”, “Eject All Disc”, and “Do Not Eject”.
“Eject Good Only” will only eject the passed disc automatically an\
d leave 
1. 
a failed disc in the DVD/CD-Recorder.
“Eject All Disc” will eject the disc, whether it has passed or failed.
2. 
If you select “Do Not Eject”, the disc will remain in the DVD/CD-
3. 
Recorder when the job is done and you will have to eject the disc from t\
he 
DVD/CD-Recorder manually. Press the ENT button to change the setting, 
or ESC to exit.
Eject Disc
Eject Good Only

ESCENT
11-10. Setup
Eject Disc

ESCENT
Eject Disc
Eject All Disc

ESCENT
Eject Disc
Do Not Eject

ESCENT