Aleratec DVD CD Shredder XC2 User Guide
Have a look at the manual Aleratec DVD CD Shredder XC2 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Aleratec DVD/CD Shredder XC2™ Part No. 240208
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy.Copyright© 2014 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com Aleratec® is a registered trademark, and DVD/CD Shredder XC2™ is a trademark of Aleratec, Inc Please record the following information to help expedite any warranty claim: Model No. _______________________________ Date Purchased __________________________________________________ Place of Purchase ________________________________________________
www.aleratec.com3 Introduction Thank you for purchasing the DVD/CD Shredder XC2. Please read this User Guide thoroughly before using this product. Precautions Before operating your DVD/CD Shredder XC2, please read the following. Warning: • When shredding DVDs or CDs, keep eyes and fingers away from the feed opening to avoid possible injury. • Always unplug the shredder prior to moving, cleaning, or emptying the wastebasket. • Continuous shredding of form fed computer paper should not exceed two minutes. • Do not attempt to repair the shredder yourself. • Keep the shredder in the OFF position when it is not in use for an extended period of time. • Product is not intended for use by children (product is not a toy). Keep shredder out of the reach of children. • Avoid touching the document feed opening with hands. Do not place hands or fingers into shredder opening to avoid serious injury. • Avoid clothing touching the document feed opening. Keep all loose articles of jewelry, and other small items away from the feed opening to prevent injury. • Avoid hair touching the document feed opening. Keep all loose articles of jewelry, and other small items away from the feed opening to prevent injury. • Keep aerosol products away.
www.aleratec.com 4 Introduction Key Items Note: Choose a Good Location 1. Allow adequate clearance for moving parts. 2. Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. 3. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. Entry slot for full size sheet of paper Entry slot for Blu-ray/DVD/CDs and Credit Cards Control Switch Waste Receptacle
www.aleratec.com5 Introduction Unpacking your Shredder 1. Place the shredder on a flat level surface. 2. Remove all packing materials from the shredder. Powering Up your Shredder 1. Plug the shredder into a 120V electrical outlet. 2. Place the slide switch in the AUTO position. 3. The power LED will illuminate and the shredder is now ready for operation.
www.aleratec.com 6 Shredder Operation This shredder is equipped with an Auto Start/Stop smart sensor, which allows the unit to automatically start when an item is placed into the feed opening and stop as soon as the item travels completely through the feed opening. Shredder Capacity • The shredder will shred up to eight letter size sheets of 20 lb. bond paper. When shredding Blu-ray, DVD or CD discs or credit cards, only insert one at a time.
www.aleratec.com7 Problems and Solutions Basic Paper Jam The shredder should automatically eject any minor excess material from the feed opening. Manually remove any unshredded material from the top of the feed opening. Minor Paper Jam Place the slide switch in the REV position and pull the remaining sheets of paper out of the feed opening. Remove the unshredded portion of paper from the top and clear any excess paper shreds from the feed opening. Major Paper Jam 1. Turn off or unplug the power cord from the AC outlet and wait at least 20 minutes for the thermal overload protection to reset. 2. Plug in the AC power cord and place the slide switch in the AUTO position. If paper was left inside the feed opening prior to the overload, place the slide switch in the REV position, grasp the excess paper from the top, and pull it out. Be careful to not place your fingers near the feed opening or serious harm could result. Clear any excess paper shreds from the feed opening. Press the power button. You are now ready to resume normal shredding. Paper Jams and Motor Overload Situations The shredder is equipped with an automatic motor overload protection circuit. The duty cycle for the shredder is rated for continuous shredding. Recommended running time at maximum capacity is 2 minutes on and 30 minutes off. The shredder will automatically terminate power if any of the following abnormal situations occur: 1. Operating the shredder at the maximum eight-sheet capacity continuously for a prolonged period of time, e.g., more than 2 minutes without stopping. 2. Exceeding the shedding capacity, e.g., inserting more than eight sheets of 20- lb paper in one pass, or if the paper is not fed squarely into the feed opening. Both abnormal operations may result in the activation of the automatic thermal motor overload protection circuit, which terminates power to the shredder. A paper jam could cause the thermal motor overload protection to terminate AC power to the motor. Never allow the shredder to remain in a jammed condition with the AC power turned on.
www.aleratec.com 8 Specifications Shredding Capacity • 1 Blu-ray, 1 DVD, 1 CD, 1 Credit Card, or 8 sheets of paper per pass Shred Type • Blu-ray/DVD/CD: Strip Cut • Paper/Credit Card: Cross Cut Shred Size • Blu-ray/DVD/CD: 30 mm ( 1.18” ) Four Strip Cut • Paper: 4 x 33 mm ( 0.16” x 1.3” ) Cross Cut • Credit Card: 4 x 33 mm ( 0.16” x 1.3” ) Cross Cut Feed Opening • Paper/Credit Card: 220 mm ( 8.7” ) • Blu-ray/DVD/CD: 127 mm ( 5” ) Weight • 3.70 kg (8.16 lbs.) Dimensions • L: 340 mm, W: 170 mm, H: 390 mm • L: 13.39” x W: 6.69” x H: 15.35” Power Requirements • 120 Volt AC, 2.4 Amp Basket Size • 12.4 Liters (3.28 Gallons)
www.aleratec.com9 Technical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec Technical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. • Troubles - your questions about the DVD/CD Shredder XC2. Please provide enough information about your problems so our technical staf f can recreate and diagnose it. Technical Support Addresses and Phone Numbers X By e-mail: [email protected] X By Telephone: 1-818-678-0484 – Skype: support.aleratec.com Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday, excluding U.S. holidays. Please try to call from a phone near your computer system. X Access is available 24 hours a day, 365 days a year, via: The World Wide Web at: www.aleratec.com FAX at: 1-818-678-0483
www.aleratec.com 10 Technical Support FAX Back Form Aleratec, Inc. Technical Support Fax Back Form To: Technical Support Group FAX: 1-818-678-0483 FROM: _____________________ FAX: ___________________________ E-MAIL ____________________________________________________ RE: ________________________ TEL: ___________________________ DATE: _______________ # OF PAGES: ___________________________ I am experiencing the following problems with my DVD/CD Shredder XC2: _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ By answering these questions, your problem will be solved more rapidly. Make copies as necessary. You can reach us electronically at: www.aleratec. com on the internet.