Alinco DJ-x2t/e Wide Band Communication Receiver Instruction Manual

   
WIDE BAND COMMUNICATION RECEIVER
Instruction ManualV/P/M
V/P/M
RX FREQUENCY
RX FREQUENCY
0.5    1000MHz 0.5    1000MHz
700  MEMORY 700  MEMORY
CHANNELS CHANNELS
MW
MWNONI
NONI
SCRT SCRTLithium-ion  BATTERY INSIDE
Lithium-ion  BATTERY INSIDE
10MHz
10MHz
BANK BANKFUNC FUNC
ENTER ENTER PS PSSTEP/SKIP1MHz
1MHz
WIDE BAND COMMUNICATION RECEIVER DJ-X2
WIDE BAND COMMUNICATION RECEIVER DJ-X2ANT
ANTSCAN SCAN
X2
MODE
MODE
VOL/SQL
VOL/SQLSET
SET
BATTERY
BATTERY~~
~~EXTERNAL
EXTERNAL
DOWN
DOWNUP
UP
V/P/MRX...

2
Contents
Features ···················································\
···················································\
····4
NOTICE ···················································\
···················································\
·····5
Precautions ···················································\
··················································6
Request and Agreement···················································\
······························6
DANGER...

3
Bugging Detector ···················································\
······································23
Keylock ···················································\
···················································\
···24
Resetting ···················································\
···················································\
·25
Cloning···················································\
···················································\
····26
Battery Indication...

4
Features
The DJ-X2 is the wide band communication receiver which has various func-
tions in a small package.
Easy operation with a simple key arrangement allows you to access a wide
range of communications.
The DJ-X2 has the following features.
Small and Light
The DJ-X2 has an internal lithium-ion battery 
in its body. You can operate the DJ-X2 with-
out external batteries. 
Its also possible to operate with AA batteries 
using the battery case. For more information, see
Accessories (P.7)
Types of...

5
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
Information in this document are subject to change without notice or obligation.All
brand names and trademarks are the property of their respective owners. Alinco
cannot be liable for pictorial or typographical inaccuracies. Some parts, options
and/or accessories are unavailable in certain areas. Changes or modifications not
expressly approved by the party responsible for compliance could void the users
authority to operate the equipment....

6
Precautions
No warranty is made on the effectiveness of the Bugging Detector function.
The function should be considered experimental and for educational or enter-
tainment use. 
Use of the descrambling function may not be permitted in certain jurisdictions.
Check with the regulations that apply in your area before using.
Request and Agreement
· This product is manufactured and shipped under strict quality control.
However, in some rare instances, if questionable or doubtful points are found,
please...

7
Accessories
Open the box and check that the following accessories are included.
· Antenna
· Battery case with recharger (EDH-27)
· AC adapter (EDC-76 (120 V), EDC-77 (230 V))
· Earphone
· Simple operation sticker
· Connector cap
nConnecting the Antenna
Connect the antenna to the SMA
antenna connector.
Hold the antenna by its base, and
turn it clockwise until it stops.
To disconnect the antenna, turn it
counter-clockwise.
nRecharging the internal lithium-ion battery
Use the Battery case with recharger...

8
2Connect the AC adapters plug to the external power supply jack on the
EDH-27.
3Connect to the AC outlet. 
Recharging lamp on the EDH-27 lights, and recharging starts. 
Tip· It takes about 2 hours to fully charge the battery. (The required time depends
on the condition of the lithium-ion battery.)
· Irrespective of the position of the battery selection switch, the lithium-ion battery
will be charged.
· Normally, the lithium-ion battery can be charged up to 500 times.
Caution!· Turn the DJ-X2s power OFF...

9
nLoading the Batteries
AA batteries may be used instead of
the internal lithium-ion battery. 
Load three AA batteries into the bat-
tery case with recharger (EDH-27) as
shown on the left.
Caution!· Do not reverse the polarity of the batteries. 
· Use new batteries of the same type and brand.
TipThe following functions extend the battery life.
Auto power off (P.42), Battery save (P.41) 

1
Chapter Names and Functions of Parts
1
Names and Functions of Parts
10
External View
The illustrations below are the DJ-X2 with the battery case and recharger 
(EDH-27) attached.
nFront
nTo p
Earphone jack
For connection of the included earphone.
Power switch
For switching power ON and OFF. (P.14)
Antenna connector
For connecting the included antenna. 
(P.7)
71.

39
3&26&/$:




.)[


.&.03:
$)//&-4
.8

.0/*
4$35
-JUIJVNJPO

#55&3:
*/4*%&
.)[
#/,6/$
&/5&3 14
45&14,*1
.)[...