AllTrade Kawasaki 192V Cordless Drill 840090 User Manual
Have a look at the manual AllTrade Kawasaki 192V Cordless Drill 840090 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C CO ON NG GR RA AT TU UL LA AT TI IO ON NS S! ! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for, this tool will give you many years of satisfaction. I IN NT TE EN ND DE ED D U US SE E This tool is intended for consumer use only. Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool. G GE EN NE ER RA AL L S SA AF FE ET TY Y R RU UL LE ES S— —F FO OR R A AL LL L B BA AT TT TE ER RY Y O OP PE ER RA AT TE ED D T TO OO OL LS S R RE EA AD D A AN ND D U UN ND DE ER RS ST TA AN ND D A AL LL L I IN NS ST TR RU UC CT TI IO ON NS S. . Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. R RE EC CO OG GN NI IZ ZE E S SA AF FE ET TY Y S SY YM MB BO OL LS S, , W WO OR RD DS S A AN ND D L LA AB BE EL LS S The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools. Always use common sense and pay particular attention to all the D DA AN NG GE ER R , W WA AR RN NI IN NG G , C CA AU UT TI IO ON N and N NO OT TE E statements of this manual. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. D DA AN NG GE ER R indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. W WA AR RN NI IN NG G indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. 2 T TA AB BL LE E O OF F C CO ON NT TE EN NT TS S C CO ON NG GR RA AT TU UL LA AT TI IO ON NS S! ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 I IN NT TE EN ND DE ED D U US SE E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 S SE EC CT TI IO ON N O ON NE E GENERAL SAFETY RULES—FOR ALL BATTERY OPERATED TOOLS . . 2 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 S SE EC CT TI IO ON N T TW WO O SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6 SAFETY RULES FOR CORDLESS RECIPROCATING SAW . . . . . . . . 6-7 SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 S SE EC CT TI IO ON N T TH HR RE EE E FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12 REMOVING/ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . . 11 CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ATTACHING/REMOVING BLADE . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 OPERATING THE RECIPROCATING SAW . . . . . . . . . . . . . . . . . . . . . . . 14-17 VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 14 GENERAL CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLUNGE CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 METAL CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 S S E EC CT TI IO ON N F FO OU UR R MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 19 S SE EC CT TI IO ON N F FI IV VE E 3 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22
W WO OR RK K A AR RE EA A K Ke ee ep p y yo ou ur r w wo or rk k a ar re ea a c cl le ea an n a an nd d w we el ll l l li it t. . Cluttered work benches and dark work areas may cause accidents or injury. D Do o n no ot t o op pe er ra at te e p po ow we er r t to oo ol ls s i in n e ex xp pl lo os si iv ve e a ar re ea as s, , s su uc ch h a as s i in n t th he e p pr re es se en nc ce e o of f f fl la am mm ma ab bl le e l li iq qu ui id ds s, , g ga as se es s o or r d du us st t. . Power tools create sparks which may ignite the dust or fumes. K Ke ee ep p b by ys st ta an nd de er rs s, , c ch hi il ld dr re en n a an nd d v vi is si it to or rs s a aw wa ay y w wh hi il le e o op pe er ra at ti in ng g a a p po ow we er r t to oo ol l. . Distractions can cause you to lose control. E EL LE EC CT TR RI IC CA AL L S SA AF FE ET TY Y D Do o n no ot t a ab bu us se e t th he e c co or rd d. . N Ne ev ve er r u us se e t th he e c co or rd d t to o c ca ar rr ry y t th he e t to oo ol l. . K Ke ee ep p t th he e c co or rd d a aw wa ay y f fr ro om m h he ea at t, , o oi il l, , s sh ha ar rp p e ed dg ge es s, , o or r m mo ov vi in ng g p pa ar rt ts s. . R Re ep pl la ac ce e d da am ma ag ge ed d c co or rd ds s i im mm me ed di ia at te el ly y. . Damaged cords may create a fire. A A b ba at tt te er ry y o op pe er ra at te ed d t to oo ol l w wi it th h i in nt te eg gr ra al l b ba at tt te er ri ie es s o or r a a s se ep pa ar ra at te e b ba at tt te er ry y p pa ac ck k m mu us st t b be e r re ec ch ha ar rg ge ed d o on nl ly y w wi it th h t th he e s sp pe ec ci if fi ie ed d c ch ha ar rg ge er r f fo or r t th he e b ba at tt te er ry y. . A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. U Us se e b ba at tt te er ry y o op pe er ra at te ed d t to oo ol l o on nl ly y w wi it th h s sp pe ec ci if fi ic ca al ll ly y d de es si ig gn na at te ed db ba at tt te er ry y p pa ac ck k. . Use of any other batteries may create risk of fire. 4 C CA AU UT TI IO ON N indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. C CA AU UT TI IO ON N used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. N NO OT TE E provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. I IM MP PO OR RT TA AN NT T S SA AF FE EG GU UA AR RD DS S P Pe eo op pl le e w wi it th h e el le ec ct tr ro on ni ic c d de ev vi ic ce es s, , s su uc ch h a as s p pa ac ce em ma ak ke er rs s, , s sh ho ou ul ld d c co on ns su ul lt t t th he ei ir r p ph hy ys si ic ci ia an n( (s s) ) b be ef fo or re e u us si in ng g t th hi is s p pr ro od du uc ct t. . O Op pe er ra at ti io on n o of f e el le ec ct tr ri ic ca al l e eq qu ui ip pm me en nt t i in n c cl lo os se e p pr ro ox xi im mi it ty y t to o a a h he ea ar rt t p pa ac ce em ma ak ke er r c co ou ul ld d c ca au us se e i in nt te er rf fe er re en nc ce e o or r f fa ai il lu ur re e o of f t th he e p pa ac ce em ma ak ke er r. . W WA AR RN NI IN NG G: : Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. W WA AR RN NI IN NG G: : Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. W Wa as sh h h ha an nd ds s a af ft te er r h ha an nd dl li in ng g. . S SA AV VE E T TH HE ES SE E I IN NS ST TR RU UC CT TI IO ON NS S F FO OR R F FU UT TU UR RE E R RE EF FE ER RE EN NC CE E. . 3
W Wh he en n b ba at tt te er ry y p pa ac ck k i is s n no ot t i in n u us se e, , k ke ee ep p i it t a aw wa ay y f fr ro om m o ot th he er r m me et ta al l o ob bj je ec ct ts s l li ik ke e: : p pa ap pe er r c cl li ip ps s, , c co oi in ns s, , k ke ey ys s, , n na ai il ls s, , s sc cr re ew ws s, , o or r o ot th he er r s sm ma al ll l m me et ta al l o ob bj je ec ct ts s t th ha at t c ca an n m ma ak ke e a a c co on nn ne ec ct ti io on n f fr ro om m o on ne e t te er rm mi in na al l t to o a an no ot th he er r. . Shorting the battery termi- nals together may cause sparks, burns or a fire. M Ma ai in nt ta ai in n t to oo ol ls s w wi it th h c ca ar re e. . K Ke ee ep p c cu ut tt ti in ng g t to oo ol ls s s sh ha ar rp p a an nd d c cl le ea an n . Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. C Ch he ec ck k f fo or r m mi is sa al li ig gn nm me en nt t o or r b bi in nd di in ng g o of f m mo ov vi in ng g p pa ar rt ts s, , b br re ea ak ka ag ge e o of f p pa ar rt ts s, , a an nd d a an ny y o ot th he er r c co on nd di it ti io on n t th ha at t m ma ay y a af ff fe ec ct t t th he e t to oo ol l’ ’s s o op pe er ra at ti io on n. .I If f d da am ma ag ge ed d, , h ha av ve e t th he e t to oo ol l s se er rv vi ic ce ed d b be ef fo or re e u us si in ng g. . Many accidents are caused by poorly maintained tools. U Us se e o on nl ly y a ac cc ce es ss so or ri ie es s t th ha at t a ar re e r re ec co om mm me en nd de ed d b by y t th he e m ma an nu uf fa ac ct tu ur re er r f fo or r y yo ou ur r m mo od de el l. . Accessories that may be suitable for one tool may create a risk of injury when used on another tool. S SE ER RV VI IC CE E T To oo ol l s se er rv vi ic ce e m mu us st t b be e p pe er rf fo or rm me ed d o on nl ly y b by y q qu ua al li if fi ie ed d r re ep pa ai ir r p pe er rs so on nn ne el l. . Service or maintenance by unqualified personnel may result in a risk of injury. W Wh he en n s se er rv vi ic ci in ng g a a t to oo ol l, , u us se e o on nl ly y i id de en nt ti ic ca al l r re ep pl la ac ce em me en nt t p pa ar rt ts s. . F Fo ol ll lo ow w i in ns st tr ru uc ct ti io on ns s i in n t th he e M Ma ai in nt te en na an nc ce e s se ec ct ti io on n o of f t th hi is s m ma an nu ua al l. . Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.. S SP PE EC CI IF FI IC C S SA AF FE ET TY Y R RU UL LE ES S A AN ND D/ /O OR R S SY YM MB BO OL LS S H Ho ol ld d t to oo ol l b by y i in ns su ul la at te ed d g gr ri ip pp pi in ng g s su ur rf fa ac ce es s w wh he en n p pe er rf fo or rm m- - i in ng g a an n o op pe er ra at ti io on n w wh he er re e t th he e c cu ut tt ti in ng g t to oo ol l m ma ay y c co on nt ta ac ct t h hi id dd de en n w wi ir ri in ng g. . Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.S SA AF FE ET TY Y R RU UL LE ES S F FO OR R C CO OR RD DL LE ES SS S R RE EC CI IP PR RO OC CA AT TI IN NG G S SA AW WS S Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. S Se ec cu ur re e t th he e m ma at te er ri ia al l b be ei in ng g w wo or rk ke ed d o on n. . N Ne ev ve er r h ho ol ld d i it t i in n y yo ou ur r h ha an nd d o or r a ac cr ro os ss s y yo ou ur r l le eg gs s. . Unstable support can cause loss of control and injury. P PE ER RS SO ON NA AL L S SA AF FE ET TY Y S St ta ay y a al le er rt t, , w wa at tc ch h w wh ha at t y yo ou u a ar re e d do oi in ng g, , a an nd d u us se e c co om mm mo on n s se en ns se e w wh he en n o op pe er ra at t- - i in ng g a a p po ow we er r t to oo ol l. . D Do o n no ot t u us se e t to oo ol l w wh hi il le e t ti ir re ed d o or r u un nd de er r t th he e i in nf fl lu ue en nc ce e o of f d dr ru ug gs s, , a al lc co oh ho ol l o or r m me ed di ic ca at ti io on n. . A moment of inattention while operating power tools may result in serious personal injury. D Dr re es ss s p pr ro op pe er rl ly y. . D Do o n no ot t w we ea ar r l lo oo os se e c cl lo ot th hi in ng g o or r j je ew we el lr ry y. . C Co on nt ta ai in n l lo on ng g h ha ai ir r. . K Ke ee ep p y yo ou ur r h ha ai ir r, , c cl lo ot th hi in ng g, , a an nd d g gl lo ov ve es s a aw wa ay y f fr ro om m m mo ov vi in ng g p pa ar rt ts s. . Loose clothes, jewelry or long hair can be caught in moving parts. A Av vo oi id d a ac cc ci id de en nt ta al l s st ta ar rt ti in ng g. . B Be e s su ur re e s sw wi it tc ch h i is s i in n t th he e l lo oc ck ke ed d o or r “ “O OF FF F” ”p po os si it ti io on n b be ef fo or re e i in ns se er rt ti in ng g b ba at tt te er ry y p pa ac ck k. . Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch “ “O ON N” ” invites accidents. R Re em mo ov ve e a ad dj ju us st ti in ng g k ke ey ys s o or r w wr re en nc ch he es s b be ef fo or re e t tu ur rn ni in ng g t th he e t to oo ol l “ “O ON N” ”. . A wrench or a key that is left attached to a rotating part of the tool may result in person- al injury. D Do o n no ot t o ov ve er rr re ea ac ch h. . K Ke ee ep p p pr ro op pe er r f fo oo ot ti in ng g a an nd d b ba al la an nc ce e a at t a al ll l t ti im me es s. . Proper foot- ing and balance enable better control of the tool in unexpected situations. U Us se e s sa af fe et ty y e eq qu ui ip pm me en nt t. . A Al lw wa ay ys s w we ea ar r e ey ye e p pr ro ot te ec ct ti io on n. . Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate con- ditions.. T TO OO OL L U US SE E A AN ND D C CA AR RE E U Us se e c cl la am mp ps s o or r o ot th he er r p pr ra ac ct ti ic ca al l w wa ay ys s t to o s se ec cu ur re e a an nd d s su up pp po or rt t t th he e w wo or rk kp pi ie ec ce e t to o a a s st ta ab bl le e p pl la at tf fo or rm m. . Holding the work by hand or against your body is unstable and may lead to loss of control. D Do o n no ot t f fo or rc ce e t to oo ol l. . U Us se e t th he e c co or rr re ec ct t t to oo ol l f fo or r y yo ou ur r a ap pp pl li ic ca at ti io on n. . The correct tool will do the job better and safer at the rate for which it is designed. D Do o n no ot t u us se e t th he e t to oo ol l i if f t th he e p po ow we er r s sw wi it tc ch h d do oe es s n no ot t t tu ur rn n i it t “ “O ON N” ” o or r “ “O OF FF F” ”. . A tool that cannot be controlled with the switch is dangerous and must be repaired. D Di is sc co on nn ne ec ct t b ba at tt te er ry y p pa ac ck k f fr ro om m t to oo ol l o or r p pl la ac ce e t th he e s sw wi it tc ch h i in n t th he e l lo oc ck ke ed d o or r “ “O OF FF F” ”p po os si i- - t ti io on n b be ef fo or re e m ma ak ki in ng g a an ny y a ad dj ju us st tm me en nt ts s, , c ch ha an ng gi in ng g a ac cc ce es ss so or ri ie es s, , o or r s st to or ri in ng g t th he e t to oo ol l. . Such preventative safety measures reduce the risk of starting the tool accidentally. S St to or re e i id dl le e t to oo ol ls s o ou ut t o of f r re ea ac ch h o of f c ch hi il ld dr re en n a an nd d o ot th he er r u un nt tr ra ai in ne ed d p pe er rs so on ns s. . Tools are dangerous in the hands of untrained users. 56
S SY YM MB BO OL LS S I IM MP PO OR RT TA AN NT T: : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. S SY YM MB BO OL LN NA AM ME EE EX XP PL LA AN NA AT TI IO ON N V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II Construction Denotes Double Insulation S SY YM MB BO OL LN NA AM ME EE EX XP PL LA AN NA AT TI IO ON Nmin Minutes Times Seconds Time Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, Torque or Position Settings W Wh he en n u us si in ng g t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w, , a al lw wa ay ys s m ma ai in nt ta ai in n a a f fi ir rm m g gr ri ip p o on n t th he e t to oo ol l w wi it th h b bo ot th h h ha an nd ds s. . Never put your hands or feet in the cutting area. Donot grasp the tool or place your hands too close to the blade. Keep your hands well away from the blade. Never reach underneath the tool while the blade is in motion. Do not use your legs or feet to stabilize the work piece. P Po os si it ti io on n y yo ou ur rs se el lf f t to o a av vo oi id d b be ei in ng g c ca au ug gh ht t b be et tw we ee en n t th he e t to oo ol l o or r s si id de e h ha an nd dl le e a an nd d w wa al ll ls s o or r p po os st ts s. . Should the blade become bound or jammed in the work, it could result in loss of control and injury. D Do o n no ot t r ru un n t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w w wh hi il le e c ca ar rr ry yi in ng g i it t a at t y yo ou ur r s si id de e. . A mov- ing blade could cause serious personal injury. D Di is sc co on nn ne ec ct t b ba at tt te er ry y p pa ac ck k f fr ro om m t to oo ol l a an nd d p pl la ac ce e t th he e s sw wi it tc ch h i in n t th he e l lo oc ck ke ed d o or r “ “O OF FF F” ” p po os si it ti io on n b be ef fo or re e m ma ak ki in ng g a an ny y a as ss se em mb bl ly y, , a ad dj ju us st tm me en nt ts s, , c ch ha an ng gi in ng g a ac cc ce es s- - s so or ri ie es s, , p pe er rf fo or rm mi in ng g a an ny y i in ns sp pe ec ct ti io on n, , m ma ai in nt te en na an nc ce e o or r c cl le ea an ni in ng g p pr ro oc ce ed du ur re es s. . Such preventivesafety measures reduce the risk of starting the tool accidentally which could cause serious personal injury. D Do o n no ot t u us se e t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w i if f i it t h ha as s b be ee en n d da am ma ag ge ed d, , l le ef ft t o ou ut t- - d do oo or rs s i in n t th he e r ra ai in n, , s sn no ow w, , w we et t o or r d da am mp p e en nv vi ir ro on nm me en nt ts s, , o or r i im mm me er rs se ed d i in n l li iq qu ui id d. . D Do o n no ot t u us se e d du ul ll l o or r d da am ma ag ge ed d b bl la ad de es s. . K Ke ee ep p c cu ut tt ti in ng g t to oo ol ls s s sh ha ar rp p a an nd d c cl le ea an n. . Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. W Wh he en n r re es st ta ar rt ti in ng g a a s sa aw w i in n t th he e w wo or rk kp pi ie ec ce e, , c ch he ec ck k t th ha at t t te ee et th h a ar re e n no ot t e en ng ga ag ge ed d i in n t th he e m ma at te er ri ia al l. . K Ke ee ep p t th he e h ha an nd dl le e o of f t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w d dr ry y, , c cl le ea an n, , a an nd d f fr re ee e f fr ro om m o oi il l a an nd d g gr re ea as se e. . B Be e e ex xt tr ra a c ca ar re ef fu ul l w wh he en n c cu ut tt ti in ng g i in n h hi ig gh h o or r h ha ar rd d- -t to o- -r re ea ac ch h l lo oc ca at ti io on ns s. . Be on the lookout for hidden wires and falling debris. M Ma ai in nt ta ai in n l la ab be el ls s a an nd d n na am me ep pl la at te es s o on n t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w. . These carry important information. If unreadable or missing, contact Alltrade for a replacement.78
B BA AT TT TE ER RY Y B Be ef fo or re e u us si in ng g b ba at tt te er ry y p pa ac ck k, , p pl le ea as se e r re ea ad d c ca ar re ef fu ul ll ly y a al ll l i in ns st tr ru uc c- - t ti io on ns s a an nd d c ca au ut ti io on na ar ry ym ma ar rk ki in ng gs s o on n b ba at tt te er ry y p pa ac ck k, , b ba at tt te er ry y c ch ha ar rg ge er r a an nd d p pr ro od du uc ct t u us si in ng g b ba at tt te er ry y. . D Do o n no ot t i in nc ci in ne er ra at te e t th he e b ba at tt te er ry y p pa ac ck k e ev ve en n i if f i it t i is s s se ev ve er re el ly y d da am m- - a ag ge ed d o or r i is s c co om mp pl le et te el ly y w wo or rn n o ou ut t. . The battery pack can explode. D Do o n no ot t c ca ar rr ry y b ba at tt te er ry y p pa ac ck ks s i in n a ap pr ro on ns s, , p po oc ck ke et ts s, , o or r t to oo ol l b bo ox xe es s, , p pr ro od du uc ct t k ki it t b bo ox xe es s, , d dr ra aw we er rs s, , e et tc c. . w wi it th h l lo oo os se e m me et ta al l o ob bj je ec ct ts s. . Battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire. T Th he e b ba at tt te er ry y p pa ac ck k i is s N Ni ic ck ke el l- -C Ca ad dm mi iu um m ( (N Ni i- -C Ca ad d) ) a an nd d i is s c co on ns si id de er re ed d t to o b be e a a t to ox xi ic c m ma at te er ri ia al l b by y t th he e E En nv vi ir ro on nm me en nt ta al l P Pr ro ot te ec ct ti io on n A Ag ge en nc cy y. . Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1 1- -8 80 00 0- -8 82 22 2- -8 88 83 37 7 . T Th he e b ba at tt te er ry y i is s n no ot t f fu ul ll ly y c ch ha ar rg ge ed d. . Before first use, the battery pack requires 3-5 hours charge time to be fully charged. Subsequent recharging needs 1 hour for the battery to be fully charged. A Al lw wa ay ys s s sw wi it tc ch h t to o a a f fr re es sh h b ba at tt te er ry y w wh he en n t to oo ol l p pe er rf fo or rm ma an nc ce e b be eg gi in ns s t to o d di im mi in ni is sh h. . Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life. N Ne ev ve er r o ov ve er r- -d di is sc ch ha ar rg ge e a a b ba at tt te er ry y b by y u us si in ng g t th he e t to oo ol l e ev ve en n a af ft te er r t to oo ol l p pe er rf fo or rm ma an nc ce e h ha as s d de ec cr re ea as se ed d. . Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance. C Ch ha ar rg ge e b ba at tt te er ry y p pa ac ck k a at t a am mb bi ie en nt t t te em mp pe er ra at tu ur re es s b be et tw we ee en n 5 50 0° °F F – – 1 10 04 4° °F F. . S St to or re e t to oo ol l a an nd d b ba at tt te er ry y p pa ac ck k i in n l lo oc ca at ti io on ns s w wh he er re e t te em mp pe er ra at tu ur re es s w wi il ll l n no ot t e ex xc ce ee ed d 1 12 20 0° °F F. . This is important to prevent serious damage to the battery cells. T Th he e b ba at tt te er ry y p pa ac ck k s sh ho ou ul ld d a al lw wa ay ys s b be e r re ec ch ha ar rg ge ed d w wh he en n t th he e C Co or rd dl le es ss s D Dr ri il ll l b be eg gi in ns s t to o r ru un n s sl lo ow wl ly y. . W Wh he en n b ba at tt te er ry y p pa ac ck k i is s n no ot t i in n u us se e, , k ke ee ep p i it t a aw wa ay y f fr ro om m o ot th he er r m me et ta al l o ob bj je ec ct ts s s su uc ch h a as s p pa ap pe er r c cl li ip ps s, , c co oi in ns s, , k ke ey ys s, , n na ai il ls s, , s sc cr re ew ws s o or r o ot th he er r s sm ma al ll l m me et ta al l o ob bj je ec ct ts s t th ha at t c ca an n m ma ak ke e a a c co on nn ne ec ct ti io on n f fr ro om m o on ne e t te er rm mi in na al l t to o a an no ot th he er r. . Shorting the battery terminals together may cause sparks, burns, or fire. 9 F FU UN NC CT TI IO ON NA AL L D DE ES SC CR RI IP PT TI IO ON N C CO ON NT TR RO OL LS S A AN ND D C CO OM MP PO ON NE EN NT TS S: : 1. Battery Pack 2. Release Buttons on Each Side 3. Charger 4. Indicator Lights 5. Saw Shoe 6. Trigger Switch C CO OM MP PO ON NE EN NT TM MO OD DE EL L N NU UM MB BE ER RBATTERY PACK 690549CHARGER 690543SAW BLADES 690865 7. Lock-Off Button 8. Rubber Grip 9. Blade Clamp Knob A AC CC CE ES SS SO OR RI IE ES S: : 10. Saw Blades (2) 1 2 8 9 6 7 5 10 3 4 ®
C CH HA AR RG GI IN NG G B BA AT TT TE ER RY Y P PA AC CK K C CH HA AR RG GE E B BA AT TT TE ER RY Y P PA AC CK K: : 1. Plug the charger into the nearest 120 volt electrical outlet. 2. Make sure the trigger on the Cordless Reciprocating Saw is in the “ “O OF FF F” ” position and remove the battery pack from the Cordless Reciprocating Saw. 3. Insert the battery pack into the charger. Be sure that the battery pack is fully seated in the charger. Do not force. 4. The red indicator light should come “ “O ON N” ” indicating that the battery pack is in a “Fast Charge” mode. If the green indicator light comes “ “O ON N” ” , then the battery is already fully charged. 5. After approximately one hour of charging, the red indicator light should go “ “O OF FF F” ” and the green light should come “ “O ON N” ” indicating that the battery is fully charged and the charger is now in a “Trickle Charge” mode. 6. The battery can be left in a “Trickle Charge” mode until ready to use. I IM MP PO OR RT TA AN NT T I IN NF FO OR RM MA AT TI IO ON N F FO OR R R RE EC CH HA AR RG GI IN NG G H HO OT T B BA AT TT TE ER RI IE ES S When using your Cordless Reciprocating Saw continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, the red light on the charger will flash. When the battery pack cools down, the red light will glow continuously to indicate fast charging mode, 1-hour charge time. T Th hi is s w wi il ll l o oc cc cu ur r w wh he en n c co on nt ti in nu uo ou us s u us se e o of f y yo ou ur r C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w c ca au us se es s t th he e b ba at tt te er ry y p pa ac ck k t to o b be ec co om me e h ho ot t. . It does not occur under normal circumstances. 12 R RE EM MO OV VI IN NG G / / A AT TT TA AC CH HI IN NG G B BA AT TT TE ER RY Y P PA AC CK K R RE EM MO OV VE E B BA AT TT TE ER RY Y P PA AC CK K: : 1. Press both release buttons on either side of the Cordless Reciprocating Saw to release the battery pack. 2. Pull battery pack free of Cordless Reciprocating Saw. A AT TT TA AC CH H B BA AT TT TE ER RY Y P PA AC CK K: : 1. Align the raised portion of the battery pack with the groove in the battery com- partment of the Cordless Reciprocating Saw. 2. Press the battery pack into place. Make sure the latches are securely fastened. Do not use the Cordless Reciprocating Saw if the battery pack is not seated properly. C CH HA AR RG GE ER R B Be ef fo or re e u us si in ng g b ba at tt te er ry y c ch ha ar rg ge er r, , p pl le ea as se e r re ea ad d c ca ar re ef fu ul ll ly y a al ll l i in ns st tr ru uc ct ti io on ns s a an nd d c ca au ut ti io on na ar ry y m ma ar rk ki in ng gs s o on n b ba at tt te er ry y c ch ha ar rg ge er r, , b ba at tt te er ry y p pa ac ck k a an nd d p pr ro od du uc ct t u us si in ng g b ba at tt te er ry y. . U Us se e o on nl ly y t th he e c ch ha ar rg ge er r w wh hi ic ch h a ac cc co om mp pa an ni ie ed d y yo ou ur r p pr ro od du uc ct t o or r d di ir re ec ct t r re ep pl la ac ce em me en nt t a as s l li is st te ed d i in n t th hi is s m ma an nu ua al l. . Do not substitute any other charger. Use only Alltrade approved chargers with your product. D Do o n no ot t d di is sa as ss se em mb bl le e c ch ha ar rg ge er r. . D Do o n no ot t u us se e c ch ha ar rg ge er r i if f i it t h ha as s b be ee en n d da am ma ag ge ed d, , l le ef ft t o ou ut td do oo or rs s i in n t th he e r ra ai in n, , s sn no ow w, , w we et t o or r d da am mp p e en nv vi ir ro on nm me en nt ts s, , o or r i im mm me er rs se ed d i in n l li iq qu ui id d. . T Th he e b ba at tt te er ry y p pa ac ck k a an nd d c ch ha ar rg ge er r h he ea at t d du ur ri in ng g c ch ha ar rg gi in ng g. . Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack. W Wh he en n t th he e b ba at tt te er ry y p pa ac ck k r re eq qu ui ir rees s r re ec ch ha ar rg gi in ng g, , a a 1 1 h ho ou ur r c ch ha ar rg ge e a al ll lo ow ws s t th he e t to oo ol l t to o o op pe er ra at te e a at t f fu ul ll l p po ow we er r. . A charging indicator light on the charger will illuminate to show that charging is taking place. 11 BATTERY PACK LED LIGHT BATTERY CHARGER RELEASE BUTTON
O OP PE ER RA AT TI IN NG G T TH HE E R RE EC CI IP PR RO OC CA AT TI IN NG G S SA AW W B Be e a aw wa ar re e t th ha at t t th hi is s t to oo ol l i is s a al lw wa ay ys s i in n a an n o op pe er ra at ti in ng g c co on nd di it ti io on n b be ec ca au us se e i it t d do oe es s n no ot t h ha av ve e t to o b be e p pl lu ug gg ge ed d i in nt to o a an n e el le ec ct tr ri ic ca al l o ou ut tl le et t. . Always turn the switch “ “O OF FF F” ” and remove the battery pack before changing blades. V VA AR RI IA AB BL LE E S SP PE EE ED D T TR RI IG GG GE ER R S SW WI IT TC CH H N Ne ev ve er r t ta ap pe e t th he e t tr ri ig gg ge er r s sw wi it tc ch h d do ow wn n t to o p pr ro ov vi id de e c co on nt ti in nu uo ou us s h hi ig gh h s sp pe ee ed d. . The tool may fail under such conditions causing fire or personal injury.T Th he e l lo oc ck k- -o of ff f b bu ut tt to on n h he el lp ps s p pr re ev ve en nt t a ac cc ci id de en nt ta al l s st ta ar rt ti in ng g. . This button can be pressed from either side. T TH HI IS S T TO OO OL L I IS S C CO ON NT TR RO OL LL LE ED D B BY Y A A T TR RI IG GG GE ER R S SW WI IT TC CH H: : • The speed of the Cordless Reciprocating Saw depends on the amount of pressure applied on the trigger. The further the trigger is pressed, the faster the tool will go. • Press the lock-off button, then pull the “ “O ON N/ /O OF FF F” ” trigger to turn the Cordless Reciprocating Saw“ “O ON N” ” . To turn the Cordless Reciprocating Saw “ “O OF FF F” ” , release the trigger switch. 14 A AS SS SE EM MB BL LY Y F Fa ai il lu ur re e t to o r re em mo ov ve e t th he e b ba at tt te er ry y p pa ac ck k f fr ro om m t th he e s sa aw w b be ef fo or re e r re em mo ov vi in ng g t th he e b bl la ad de e c co ou ul ld d r re es su ul lt t i in n a ac cc ci id de en nt ta al l s st ta ar rt ti in ng g a an nd d s se er ri io ou us s p pe er rs so on na al l i in nj ju ur ry y. . A AT TT TA AC CH HI IN NG G / / R RE EM MO OV VI IN NG G B BL LA AD DE E • Remove the battery pack. T TO O A AT TT TA AC CH H B BL LA AD DE E: : • Rotate the clamp knob clockwise and hold to retract the clamping jaws inside the clamp. • Insert the shank of the blade into the clamp until the hole in the shank engages the dent ball in the clamp. • Release the clamp knob to tighten and secure the blade in place. • Replace the battery pack. T TO O R RE EM MO OV VE E B BL LA AD DE E: : • Rotate the clamp knob clockwise and hold to retract the clamping jaws inside the clamp. • Pull the blade off the clamp. • Replace the battery pack. 13 TRIGGER LOCK-ON BUTTON BLADE CLAMP
P PL LU UN NG GE E C CU UT TT TI IN NG G N Ne ev ve er r f fe ee ed d t th he e b bl la ad de e i in nt to o t th he e w wo or rk k p pi ie ec ce e u un nt ti il l t th he e b bl la ad de e i is s a at t f fu ul ll l s sp pe ee ed d. . I If f t th he e b bl la ad de e i is s n no ot t a at t f fu ul ll l s sp pe ee ed d, , t th he e s sa aw w m ma ay y k ki ic ck k b ba ac ck k c ca au us si in ng g s se er ri io ou us s p pe er rs so on na al l i in nj ju ur ry y. . • Mark out the line to be cut so it is easily visible. • Start inside the area to be cut out. • Depress the lock-on button and press the trigger to start the saw. • Set the shoe against the work piece. • When the blade reaches full speed, slowly feed the blade into the work piece. M ME ET TA AL L C CU UT TT TI IN NG G N Ne ev ve er r u us se e g ga as so ol li in ne e o or r a an ny y f fl la am mm ma ab bl le e l li iq qu ui id d a as s a a l lu ub br ri ic ca an nt t. . S Sp pa ar rk ki in ng g f fr ro om m t th he e m mo ot to or r m ma ay y c ca au us se e i it t t to o i ig gn ni it te e i in nt to o f fl la am me es s. . • When cutting metals other then copper, brass or aluminum, always use a lubri- cant, such as cutting oil, to keep the blade cool. This will prolong the life of the blade as well as speeding up the cutting process. • Make sure the work piece is held securely in place. Hold smaller pieces, such as pipe or conduit, in a vise or attach to the workbench with clamps. • To eliminate vibration, always cut close to the clamping point. • When cutting thin sheets of metal, place a piece of plywood on either side to control vibration and prevent tearing.16 G GE EN NE ER RA AL L C CU UT TT TI IN NG G A Al lw wa ay ys s h ho ol ld d t th he e s sa aw w i in n f fr ro on nt t o of f y yo ou u a an nd d a aw wa ay y f fr ro om m y yo ou ur r b bo od dy y. . K Ke ee ep p y yo ou ur r h ha an nd ds s a an nd d f fe ee et t w we el ll l a aw wa ay y f fr ro om m t th he e w wo or rk k p pi ie ec ce e. . N Ne ev ve er r f fe ee ed d t th he e b bl la ad de e i in nt to o t th he e w wo or rk k p pi ie ec ce e u un nt ti il l t th he e b bl la ad de e i is s a at t f fu ul ll l s sp pe ee ed d. . I If f t th he e b bl la ad de e i is s n no ot t a at t f fu ul ll l s sp pe ee ed d, , t th he e s sa aw w m ma ay y k ki ic ck k b ba ac ck k c ca au us si in ng g s se er ri io ou us s p pe er rs so on na al l i in nj ju ur ry y. . U Us se e p pr ro op pe er r b bl la ad de e f fo or r t th he e p pa ar rt ti ic cu ul la ar r c cu ut tt ti in ng g a ap pp pl li ic ca at ti io on n. . • Put on eye protection. • Clear the saw of any foreign material. • Make sure the work piece is held securely in place. Hold smaller pieces in a vise or attach to the workbench with clamps. • Mark out the line to be cut so it is easily visible. • Pull the trigger to start the saw. • Set the shoe against the work piece. • When the blade reaches full speed, slowly feed the blade into the work piece. 15
A AC CC CE ES SS SO OR RI IE ES S U Us se e o on nl ly y a ac cc ce es ss so or ri ie es s t th ha at t a ar re e r re ec co om mm me en nd de ed d b by y t th he e m ma an nu uf fa ac ct tu ur re er r f fo or r y yo ou ur r m mo od de el l. . Accessories that may be suitable for one tool may become hazardous when used on another tool. A Al lw wa ay ys s a at tt ta ac ch h g gr ro ou un nd de ed d ( (3 3- -p pr ro on ng g) ) e ex xt te en ns si io on n c co or rd ds s t to o g gr ro ou un nd de ed d ( (3 3- -h ho ol le e) ) o ou ut tl le et ts s. . I If f y yo ou u m mu us st t u us se e a an n e ex xt te en ns si io on n c co or rd d, , b be e s su ur re e t th ha at t t th he e g ga au ug ge e i is s l la ar rg ge e e en no ou ug gh h t to o c ca ar rr ry y t th he e a am mo ou un nt t o of f c cu ur rr re en nt t n ne ec ce es ss sa ar ry y f fo or r y yo ou ur r p po ow we er r t to oo ol l. . If not, your tool may experi- ence a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table on next page). R RE EC CO OM MM ME EN ND DE ED D S SI IZ ZE ES S O OF F E EX XT TE EN NS SI IO ON N C CO OR RD DS S 1 12 20 0 V VO OL LT T A AC C 6 60 0 H HZ Z T TO OO OL LS S T TO OO OL L C CU UR RR RE EN NT T R RA AT TI IN NG GC CO ON ND DU UC CT TO OR R S SI IZ ZE E I IN N A A. .W W. .G G AMPERE 10FT. 25FT. 50FT. 100FT. 3-6 18 18 18 186-8 18 18 18 168-10 18 18 18 1410-12 16 16 14 1412-16 14 12 12 -16-20 12 12 12 - S SP PE EC CI IF FI IC CA AT TI IO ON NS S S SP PE EC CI IF FI IC CA AT TI IO ON NS S Voltage 19.2V Length of Stroke 22mm (7/8)Switch Variable Speed with BrakeCharger Input 120V 60HzCharging Time Approx. 1 hourNo Load Speed (RPM) 0-3200/minBattery Type Ni-Cad P PR RO OT TE EC CT TI IN NG G T TH HE E E EN NV VI IR RO ON NM ME EN NT T B BA AT TT TE ER RI IE ES S Alltrade batteries can be recharged many times. At the end of their useful life, recycle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1 1- -8 80 00 0- -8 82 22 2- -8 88 83 37 7 . Collected batteries will be recycled or disposed of properly. 18 M MA AI IN NT TE EN NA AN NC CE E A AN ND D C CL LE EA AN NI IN NG G A Al lw wa ay ys s r re em mo ov ve e t th he e b ba at tt te er ry y p pa ac ck k b be ef fo or re e a at tt te em mp pt ti in ng g c cl le ea an ni in ng g o or r m ma ai in nt te en na an nc ce e. . T Th hi is s C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w i is s l lu ub br ri ic ca at te ed d b be ef fo or re e i it t l le ea av ve es s t th he e f fa ac ct to or ry y. . This lubrication should last for the life of the tool. No further lubrication is required. U Us se e o on nl ly y m mi il ld d s so oa ap p a an ndd a a d da am mp p c cl lo ot th h t to o c cl le ea an n t th he e t to oo ol l. . Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear. A Al lw wa ay ys s c cl le ea an n t th he e b ba at tt te er ry y p pa ac ck k u us si in ng g o on nl ly y a a d dr ry y c cl lo ot th h. . D Do o n no ot t u us se e l li iq qu ui id ds s. . A Al lw wa ay ys s u un np pl lu ug g t th he e c ch ha ar rg ge er r b be ef fo or re e c cl le ea an ni in ng g i it t. . R Re eg gu ul la ar rl ly y c cl le ea an n t th he e v ve en nt ti il la at ti io on n s sl lo ot ts s i in n y yo ou ur r t to oo ol l a an nd d c ch ha ar rg ge er r u us si in ng g o on nl ly y a a s so of ft t b br ru us sh h o or r d dr ry y c cl lo ot th h. . I In ns sp pe ec ct t a al ll l m mo ou un nt ti in ng g s sc cr re ew ws s r re eg gu ul la ar rl ly y. . T Ti ig ghht te en n a an ny y l lo oo os se e s sc cr re ew ws s. . F Fa ai il lu ur re e t to o k ke ee ep p t th he e m mo ou un nt ti in ng g s sc cr re ew ws s t ti ig gh ht t c co ou ul ld d r re es su ul lt t i in n s se er ri io ou us s i in nj ju ur ri ie es s. . N Ne ev ve er r o op pe en n t th he e C Co or rd dl le es ss s R Re ec ci ip pr ro oc ca at ti in ng g S Sa aw w c ca as se e, , b ba at tt te er ry y p pa ac ck k o or r c ch ha ar rg ge er r. . Do not attempt to repair the Cordless Reciprocating Saw, battery pack or charger yourself. Opening any of these parts will void your warranty. 17 OIL
and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever. T TH HE ER RE E A AR RE E N NO O W WA AR RR RA AN NT TI IE ES S W WH HI IC CH H E EX XT TE EN ND D B BE EY YO ON ND D T TH HE E D DE ES SC CR RI IP PT TI IO ON N O ON N T TH HE E F FA AC CE E H HE ER RE EO OF F. . W Wa ar rr ra an nt ty y P Pe er rf fo or rm ma an nc ce e By purchasing the product, purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’s facility postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair, 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723) within the applicable warranty period, with a written request by purchaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number, dated proof of purchase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date. Parts returned, freight prepaid and insured, to Alltrade’s facility (see above address) will be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if found to be defective and subject to warranty. Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically, a defective product that is returned within the first 30 days after the purchase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the purchaser. Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’s facility, unless expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commercial loss or consequential damages. 20 O OT TH HE ER R C CO ON NS SU UM ME ER R D DO O- -I IT T- -Y YO OU UR RS SE EL LF F ( (D DI IY Y) ) T TO OO OL LS S Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 3 3 Y YE EA AR R L LI IM MI IT TE ED D W WA AR RR RA AN NT TY Y E Ex xp pr re es ss s a an nd d E Ex xc cl lu us si iv ve e L Li im mi it te ed dW Wa ar rr ra an nt ty y t to o O Or ri ig gi in na al l R Re et ta ai il l B Bu uy ye er r Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail purchaser of the accompanying KAWASAKI™ power tool and no one else all parts of the product (except those parts referred to below which are specifically exclud- ed from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of three years from original date of purchase, except that such warranty with regard to the battery shall be for a period of two years from original date of purchase, unless the tool is used for commercial or rental purposes. S SP PE EC CI IA AL L W WA AR RR RA AN NT TY Y N NO OT TE E F FO OR RC CO OM MM ME ER RC CI IA AL L O OR R R RE EN NT TA AL L U US SE E: : The above warranty for this Kawasaki™ power tool, including the battery, shall be effective for only 90 days from the original date of purchase if this tool is used for any C CO OM MM ME ER RC CI IA AL L O OR R R RE EN NT TA AL LP PU UR RP PO OS SE E. . The date of purchase shall be the date of shipment to the original purchaser, or the date the original purchaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified or altered. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, 19