Home > AllTrade > Drill > AllTrade Kawasaki 192V Cordless Drill 840131 User Manual

AllTrade Kawasaki 192V Cordless Drill 840131 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual AllTrade Kawasaki 192V Cordless Drill 840131 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    TNENOPMOC
    RH1-131048#
    LLI
    R
    D 
    DET
    A
    REP
    O-Y
    RETT
    A
    B 
    DEEPS-2 V2.91
    LAUNAM NOITCURTSNI
    
    ECIVRES REMOTSUC ROF
    ETNEV SÉRPA ECIVRES EL RUOP
    RUETAMMOSNOC UD UO
    OICIVRES LE ARAP
    RODIMUSNOC LE ARAP
    3273-095-008-1
     anihC ni detnirP
    
    75906-4091-78
    ™IKASAWAK YB DESNECIL KRAMEDART A SI™IKASAWAK
     RO ERUTCAFUNAM TON SEOD HCIHW ,.A.S.U ,.PROC SROTOM
    EB DLUOHS SERIUQNI REMUSNOC .TCUDORP SIHT ETUBIRTSID
    :OT DETCERID
    .CLL ,SLOOT EDARTLLA 6002 THGIRYPOC©
    ATALP AIV 1341
    ASU 2641-01809 AC ,HCAEB GNOL
    60/62/8 veR_llirD sseldroC neerG V2.91 – 131048
    ,NOITAREPO,YTEFAS GNIDRAGER NOITAMROFNI TNATROPMI SNIATNOC LAUNAM SIHT
     DNA YLLUFERAC DAER,ESU EROFEB.TCUDORP SIHT FO EGAROTS DNA ECNANETNIAM
    OD OT ERULIAF.SLEBAL TCUDORP DNA SNOITCURTSNI,SGNINRAW,SNOITUAC LLA DNATSREDNU
    .EGAMAD YTREPORP RO/DNA YRUJNI LANOSREP SUOIRES NI TLUSER DLUOC OS
     EDARTLLA RUOY HTIW MELBORP A ECNEIREPXE RO SNOITSEUQ YNA EVAH DLUOHS UOY FI
    ECIVRES REMOTSUC RUO LLAC ESAELP.EROTS EHT OT TCUDORP SIHT NRUTER TON OD,TCUDORP
     TA TNEMTRAPED
    3273-095-008-1
     NOITAMROFNI GNIWOLLOF EHT EVAH,LLAC UOY EROFEB.
     EDARTLLA NA.NOITACOL EROTS DNA DESAHCRUP ETAD,.oN LEDOM:ELBALIAVA
    EKAM OT EKIL DLUOW UOY FI.ENOHP EHT REVO MELBORP RUOY EVLOSER NAC EVITATNESERPER
    .MOC.SLOOTEDARTLLA@OFNI:TA SU LIAME RO LLAC A SU EVIG,TNEMMOC RO NOITSEGGUS A
    .SU OT LATIV SI KCABDEEF RUOY 
    						
    							SECTION FOUR
    MAINTENANCE AND CLEANING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
    ACCESSORIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    PROTECTING THE ENVIRONMENT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
    OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  . . . . . . . . . . . . . . 18
    SECTION FIVE
    3 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22
    CONGRATULATIONS!
    Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
    products at an affordable price, and we want you to be totally satisfied with your
    product and our Customer Service. If any help and advice is needed, please 
    contact us at 1-800-590-3723. Properly cared for, this tool will give you many 
    years of satisfaction.
    INTENDED USE
    This tool is intended for consumer use only. Your charger and/or adapter has been
    designed for charging batteries of the type approved and supplied with this tool.
    GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS
    READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to
    follow all instructions listed below may result in electric shock, fire and/or 
    serious personal injury.
    RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
    The safety instructions provided in this manual are not intended to cover all possible
    conditions and practices that may occur when operating, maintaining and cleaning
    power tools.
    Always use common sense and pay particular attention to all the DANGER, 
    WARNING, CAUTIONand NOTEstatements of this manual.
    This is the safety alert symbol. It is used to alert
    you to potential personal injury hazards. Obey all
    safety messages that follow this symbol to avoid
    possible injury or death.
    TABLE OF CONTENTS
    CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    SECTION ONE
    GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS  . . 2
    RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  . . . . . . . . 2-3
    IMPORTANT SAFEGUARDS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
    WORK AREA  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
    ELECTRICAL SAFETY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
    PERSONAL SAFETY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
    TOOL USE AND CARE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    SERVICE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    SECTION TWO
    SPECIFIC SAFETY RULES AND/OR SYMBOLS  . . . . . . . . . . . . . . . . . . . 6
    SAFETY RULES FOR CORDLESS DRILL/DRIVERS . . . . . . . . . . . . . 6-7
    SYMBOLS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    SECTION THREE
    FUNCTIONAL DESCRIPTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    BATTERY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
    REMOVING/ATTACHING BATTERY PACK  . . . . . . . . . . . . . . . . . . . . 10
    CHARGER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    CHARGING BATTERY PACK  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
    INSTALLING DRILL BIT INTO KEYLESS CHUCK  . . . . . . . . . . . . . . 12
    OPERATING THE CORDLESS DRILL  . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15
    VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 13
    FORWARD / REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 13
    TORQUE SETTINGS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
    HIGH/LOW SPEED (GEAR) SHIFTING  . . . . . . . . . . . . . . . . . . . . . . 14
    SCREWDRIVING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    DRILLING METAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    DRILLING MASONRY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    DRILLING WOOD  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    HINTS FOR OPTIMUM USE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
    2 1 
    						
    							DANGERindicates an imminently hazardous 
    situation which, if not avoided, will result in death
    or serious injury.
    WARNINGindicates a potentially hazardous 
    situation which, if not avoided, could result in
    death or serious injury.
    CAUTIONindicates a potentially hazardous 
    situation which, if not avoided, may result in
    minor or moderate injury.
    CAUTIONused without the safety alert symbol
    indicates a potentially hazardous situation which,
    if not avoided, may result in property damage.
    NOTEprovides additional information that is useful
    for proper use and maintenance of this tool. If a
    NOTE is indicated make sure it is fully understood.
    IMPORTANT SAFEGUARDS
    People with electronic devices, such as pacemakers, should consult their
    physician(s) before using this product. Operation of electrical equipment in
    close proximity to a heart pacemaker could cause interference or failure of
    the pacemaker.
    WARNING:Some dust created by power sanding, sawing, grinding, drilling and
    other construction activities contains chemicals known to the State of California
    to cause cancer, birth defects or other reproductive harm.
    Some examples of these chemicals are:
    • Lead from lead-based paints. 
    • Crystalline silica from bricks and cement and other masonry products,
    and arsenic and chromium from chemically-treated lumber.
    Your risk from these exposures varies, depending on how often you do this type
    of work. To reduce your exposure to these chemicals: work in a well ventilated
    area, and work with approved safety equipment, such as dust masks that are
    specially designed to filter out microscopic particles.
    WARNING: Handling the power cord on corded products may expose you to
    lead, a chemical known to the State of California to cause cancer and birth
    defects or other reproductive harm.
    Wash hands after handling.
    SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
    WORK AREA
    Keep your work area clean and well lit.Cluttered work benches and dark work
    areas may cause accidents or injury.
    Do not operate power tools in explosive areas, such as in the presence of 
    flammable liquids, gases or dust. Power tools create sparks which may ignite
    the dust or fumes.
    Keep bystanders, children and visitors away while operating a power tool.
    Distractions can cause you to lose control. 
    ELECTRICAL SAFETY
    Do not abuse the cord. Never use the cord to carry the tool. Keep the cord
    away from heat, oil, sharp edges, or moving parts. Replace damaged cords
    immediately.Damaged cords may create a fire.
    A battery operated tool with integral batteries or a separate battery pack
    must be recharged only with the specified charger for the battery.A charger
    that may be suitable for one type of battery may create a risk of fire when used with
    another battery.
    Use battery operated tool only with specifically designatedbattery pack.Use of
    any other batteries may create risk of fire.PERSONAL SAFETY
    Stay alert, watch what you are doing, and use common sense when operat-
    ing a power tool. Do not use tool while tired or under the influence of drugs,
    alcohol or medication.A moment of inattention while operating power tools
    may result in serious personal injury.
    Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
    Keep your hair, clothing, and gloves away from moving parts.Loose clothes,
    jewelry or long hair can be caught in moving parts. 
    Avoid accidental starting. Be sure switch is in the locked or “OFF” position
    before inserting battery pack. Carrying power tools with your finger on the switch
    or inserting battery pack into a tool with the power switch “ON”invites accidents.
    4 
    						
    							SERVICE
    Tool service must be performed only by qualified repair personnel.Service or
    maintenance by unqualified personnel may result in a risk of injury. 
    When servicing a tool, use only identical replacement parts. Follow instructions
    in the Maintenance section of this manual. Use of unauthorized parts or failure to
    follow Maintenance Instructions may create a risk of shock or injury.
    SPECIFIC SAFETY RULES AND/OR SYMBOLS
    Hold tool by insulated gripping surfaces when perform-
    ing an operation where the cutting tool may contact hidden wiring.Contact
    with a “live” wire will also make exposed metal parts of the tool “live” and shock
    the operator.
    SAFETY RULES FOR CORDLESS DRILL / DRIVERS
    Always wear safety goggles or eye protection when using this tool.Use a
    dust mask or respirator for applications which generate dust. 
    Do not grasp the tool or place your hands too close to the spinning chuck or
    drill bit. Your hand may be lacerated or may cause injury.
    Secure the material being worked on. Never hold it in your hand or across
    your legs. Unstable support can cause loss of control and injury.
    Position yourself to avoid being caught between the tool or side handle and
    walls or posts.Should the socket or bit become bound in the work, the 
    reaction torque of the tool could crush your hand or leg.
    Check to see that keys and adjusting wrenches are removed from the
    Cordless Drill before switching the tool “ON”.Keys or wrenches can fly away
    at high velocity striking you or a bystander.
    When using the Cordless Drill, always maintain a firm grip on the tool with both
    hands.
    Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.
    Do not run the Cordless Drill while carrying it at your side.A spinning 
    socket or bit could become entangled with clothing and injury may result.
    Disconnect the plug or remove the battery pack from tool and place the switch
    in the locked or “OFF” position before making any assembly adjustments,
    changing accessories, performing any inspection, maintenance or cleaning
    procedures. Such preventive safety measures reduce the risk of starting the
    tool accidentally.
    Remove adjusting keys or wrenches before turning the tool “ON”.A wrench or a
    key that is left attached to a rotating part of the tool may result in personal injury.
    Do not overreach. Keep proper footing and balance at all times. Proper foot-
    ing and balance enable better control of the tool in unexpected situations.
    Use safety equipment. Always wear eye protection. Dust mask, non-skid safe-
    ty shoes, hard hat, or hearing protection must be used for appropriate conditions.
    TOOL USE AND CARE
    Use clamps or other practical ways to secure and support the workpiece to a 
    stable platform.Holding the work by hand or against your body is unstable and
    may lead to loss of control.
    Do not force tool. Use the correct tool for your application.The correct tool
    will do the job better and safer at the rate for which it is designed.
    Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that
    cannot be controlled with the switch is dangerous and must be repaired.
    Disconnect battery pack from tool or place the switch in the locked or “OFF” posi-
    tion before making any adjustments, changing accessories, or storing the tool.
    Such preventative safety measures reduce the risk of starting the tool accidentally.
    Store idle tools out of reach of children and other untrained persons.Tools
    are dangerous in the hands of untrained users.
    When battery pack is not in use, keep it away from other metal objects like:
    paper clips, coins, keys, nails, screws, or other small metal objects that can
    make a connection from one terminal to another. Shorting the battery termi-
    nals together may cause sparks, burns or a fire.
    Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
    tools with sharp cutting edge are less likely to bind and are easier to control. 
    Check for misalignment or binding of moving parts, breakage of parts, and any
    other condition that may affect the tool’s operation. If damaged, have the tool
    serviced before using.Many accidents are caused by poorly maintained tools.
    Use only accessories that are recommended by the manufacturer for your
    model.Accessories that may be suitable for one tool may create a risk of injury
    when used on another tool.
    56 
    						
    							FUNCTIONAL DESCRIPTION
    CONTROLS AND COMPONENTS:
    1. Battery Pack
    2. Release Buttons on Each Side
    3. Charger
    4. Indicator Lights
    5. 12.7mm (1/2) Keyless Chuck
    6. 22 Adjustable Torque Settings
    Control Ring
    7. Forward/Reversing and 
    Trigger Lock Lever
    COMPONENT MODEL NUMBERBATTERY PACK 690549CHARGER 69054312.7mm (1/2) KEYLESS CHUCK 690552
    8
    Do not use the Cordless Drill if it has been damaged, left outdoors in the
    rain, snow, wet or damp environments, or immersed in liquid.
    Maintain labels and nameplates on the Cordless Drill.These carry important
    information. If unreadable or missing, contact Alltrade for a replacement.
    SYMBOLS
    IMPORTANT: Some of the following symbols may be used on your tool. Please
    study them and learn their meaning. Proper interpretation of these symbols will
    allow you to operate the tool better and safer.
    SYMBOL NAME EXPLANATION
    V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight
    Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II Construction Denotes Double Insulation
    min Minutes Times Seconds Time
    Diameter Size of Drill Bits, 
    Grinding Wheels, etc.
    No load speed No-load Rotational Speed
    .../min Revolutions per Minute Revolutions, Surface Speed, 
    Strokes, etc. per Minute
    1,2,3, … Ring Selector Settings Speed, Torque or Position Settings
    8. High/Low Speed Switch
    9. Variable Speed Controlled 
    Trigger Switch
    10. Accessory/Bit Holder
    11. Comfort Rubber Grip
    ACCESSORIES:
    12. Double Ended Screwdriver Bits (2)
    11
    12
    10
    5
    6
    8
    9
    7
    2
    1
    3
    4
    7 
    						
    							BATTERY
    Before using battery pack, please read carefully all instruc-
    tions and cautionarymarkings on battery pack, battery
    charger and product using battery.
    Do not incinerate the battery pack even if it is severely dam-
    aged or is completely worn out.The battery pack can explode.
    Do not carry battery packs in aprons, pockets, or tool
    boxes, product kit boxes, drawers, etc. with loose metal objects.Battery
    pack terminals could be short circuited causing damage to the battery pack,
    severe burns or fire.
    The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic
    material by the Environmental Protection Agency.Before disposing of dam-
    aged or worn out Ni-Cad battery packs, check with your State Environmental
    Protection Agency to find out about special restrictions on the disposal of these
    battery packs, take them to your local recycling center for proper disposal, or
    call 1-800-822-8837.
    The battery is not fully charged. Before first use, the battery pack requires 
    3-5 hours charge time to be fully charged. Subsequent recharging needs 1 hour
    for the battery to be fully charged. 
    Always switch to a fresh battery when tool performance begins to diminish.
    Severe heat is most destructive to a battery; the more heat generated, the faster
    the battery loses power. A battery that gets too hot can have a shortened life. 
    Never over-discharge a battery by using the tool even after tool performance
    has decreased.Do not attempt to discharge a tool’s battery by continuing to
    pull on the tool trigger. When tool performance begins to diminish, stop the tool
    and recharge the battery for optimal performance.
    Charge battery pack at ambient temperatures between 50° F – 104° F. 
    Store tool and battery pack in locations where temperatures will not exceed
    120°F. This is important to prevent serious damage to the battery cells.
    The battery pack should always be recharged when the Cordless Drill begins to
    run slowly. 
    When battery pack is not in use, keep it away from other metal objects such as
    paper clips, coins, keys, nails, screws or other small metal objects that can
    make a connection from one terminal to another.Shorting the battery terminals
    together may cause sparks, burns, or fire.  
    REMOVING/ATTACHING BATTERY PACK
    REMOVE BATTERY PACK:
    1. Press both release buttons on either
    side of the Cordless Drill to release 
    the battery pack.
    2. Pull battery pack free of Cordless Drill.
    ATTACH BATTERY PACK:
    1. Align the raised portion of the battery
    pack with the groove in the battery
    compartment of the Cordless Drill.
    2. Press the battery pack 
    into place. Make sure the
    latches are securely fastened. 
    Do not use the Cordless 
    Drill if the battery pack is 
    not seated properly.  
    CHARGER
    Before using battery charger, please read carefully all
    instructions and cautionary markings on battery charger, battery pack and
    product using battery.
    Use only the charger which accompanied your product or direct replacement as
    listed in this manual.Do not substitute any other charger. Use only Alltrade
    approved chargers with your product.
    Do not disassemble charger.
    Do not use charger if it has been damaged, left outdoors in the rain, snow, wet
    or damp environments, or immersed in liquid.
    The battery pack and charger heat during charging. Place the charger on a flat, 
    non-flammable surface away from flammable materials with at least four inches of
    clearance to allow proper air circulation around the charger and battery pack.
    When the battery pack requires recharging, a 1 hour charge allows the tool to
    operate at full power.A charging indicator light on the charger will illuminate to
    show that charging is taking place. 
    10
    ®
    RELEASE BUTTON 
    						
    							CHARGING BATTERY PACK
    CHARGE BATTERY PACK:
    1. Plug the charger into 
    the nearest 120 volt 
    electrical outlet.
    2. Make sure the trigger 
    on the Cordless Drill 
    is in the “OFF”
    position and remove 
    the battery pack from 
    the Cordless Drill.
    3. Insert the battery pack
    into the charger. Be sure
    that the battery pack is
    fully seated in the charger. 
    Do not force. 
    4. The red indicator light should come “ON”indicating that the battery pack is in
    a “Fast Charge” mode. If the green indicator light comes “ON”, then the battery
    is already fully charged.
    5. After approximately one hour of charging, the red indicator light should go
    “OFF” and the green light should come “ON” indicating that the battery is fully
    charged and the charger is now in a “Trickle Charge” mode.
    6. The battery can be left in a “Trickle Charge” mode until ready to use.
    IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES
    When using your Cordless Drill continuously, the batteries in your battery pack 
    will become hot. You should let a hot battery pack cool down for approximately 
    30 minutes before attempting to recharge. When the battery pack becomes 
    discharged and is hot, the red light on the charger will flash. When the battery 
    pack cools down, the red light will glow continuously to indicate fast charging
    mode, 1-hour charge time.
    This will occur when continuous use of your Cordless
    Drill causes the battery pack to become hot. It does not occur under normal
    circumstances.
    ASSEMBLY
    Be aware that this tool is always in an operating condition
    because it does not have to be plugged into an electrical outlet.Always turn
    the switch “OFF”and remove the battery pack before changing bits.
    INSTALLING DRILL BIT INTO KEYLESS CHUCK
    Before inserting a drill bit or other accessory,make sure the forward/reverse
    and trigger lock lever is in the center “OFF”position to prevent accidental starts
    that may result in injury.
    Do not attempt to tighten drill bits (or any other accessory) by gripping the
    front of the chuck and turning the tool on.This may cause personal injury
    and/or damage to the chuck.
    When removing the bit from the tool, avoid contact with skin and use proper
    protective gloves when grasping the bit or accessory.Accessories may be hot
    after prolonged use.
    1. Hold the rear end of the chuck 
    in one hand and use the other
    hand to rotate the front end in a
    counterclockwise direction to
    open the jaws of the chuck.
    2. Insert the shank of the bit (or
    other accessory) fully into the
    keyless chuck, taking care to
    keep the bit in the center of 
    the jaws of the chuck.
    3. Turn the front end of the chuck clockwise to hold the bit in place.
    4. Tighten securely by turning the front end of the chuck clockwise while holding
    the rear end.
    OPERATING THE DRILL
    Never tape the trigger switch down to provide continu-
    ous high speed.The tool may fail under such conditions causing fire or 
    personal injury.
    WARNING
    12
    BATTERY PACK
    LED
    LIGHT
    BATTERY
    CHARGER
    TIGHTENLOOSENHOLD 
    						
    							THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:
    • For light duty work, use lower settings.
    • For heavy duty work, use higher settings.
    PROPER SETTING FOR DRIVING SCREWS:
    1. Set the ring on the lowest 
    setting to begin.
    2. Try tightening the first screw. 
    If the drill drives smoothly, 
    proceed with the next screw.
    3. If the Drill’s clutch slips, 
    increase the torque setting 
    and try again until the Drill 
    drives the screw without incident.
    HIGH/LOW SPEED (GEAR) SHIFTING
    FOR LOW SPEED SETTING:
    • Slide the switch on top of the 
    Drill to Position 1 for high
    torque applications and driving
    screws.
    FOR HIGH SPEED SETTING:
    • Slide the switch to Position 2 
    for light duty projects.
    SCREWDRIVING
    WHEN DRIVING FASTENERS:
    • Always start slowly and gradually increase the speed of the Drill. 
    • Release the trigger when you feel the clutch slip.
    • Always keep the driver bit straight to prevent damage to the screw. 
    • Hold the Drill with both hands to ensure control if the bit should stick or slip.
    • To prevent wood from splitting, drill pilot holes into the wood before driving 
    in the screws.
    14
    VARIABLE SPEED TRIGGER SWITCH
    THIS TOOL IS CONTROLLED 
    BY A TRIGGER SWITCH:
    • The speed of the Cordless Drill depends 
    on the amount of pressure you put on the
    trigger.
    • The more pressure you apply, the faster
    the Cordless Drill  will go.
    • Release the pressure and the Cordless Drill
    will slow down. 
    FORWARD / REVERSE AND TRIGGER LOCK LEVER
    Be sure the trigger is released when changing the position of the lever.
    Always store the tool in the“LOCKED/OFF”position.
    Always check the direction of the Cordless Drills rotation before use.
    TO SELECT THE DIRECTIONS 
    OF ROTATION:
    • To select forward Cordless Drill 
    rotation, press the trigger lock 
    from left to right flat against the Cordless
    Drill body.
    • To select reverse, press the trigger lock
    lever in the opposite direction.
    • The center position locks the tool.
    TORQUE SETTINGS
    To prevent damaging the tool or driving screw too deep
    into work piece, release the trigger when you feel the clutch slip.
    13
    TRIGGER
    LOCK
    TRIGGER
    SWITCH
    HIGH SPEED LOW SPEED
    CONTROL RING 
    						
    							• Never try to start a stalled Drill by clicking the trigger switch “ON”and “OFF”.
    This may damage your tool.
    • To reduce jamming, always keep the Drill running when pulling the bit out of a 
    finished hole.
    SCREWDRIVING:
    • Always use the correct type and size of screwdriver bit.
    • If screws are difficult to tighten, try applying a small amount of washing liquid or
    soap as a lubricant.
    • Always hold the tool and screwdriver bit in a straight line with the screw.
    MAINTENANCE AND CLEANING
    Always remove the battery pack before attempting
    cleaning or maintenance.
    This Cordless Drill is lubricated before it leaves the 
    factory. This lubrication should last for the life of the tool. No further 
    lubrication is required.
    Use only mild soap and a damp cloth to clean the tool.Never let any liquid get
    inside the casing. Never immerse any part of the tool in a liquid. Always keep the
    ventilation openings clear.
    Always clean the battery pack using only a dry cloth. Do not use liquids. 
    Always unplug the charger before cleaning it.
    Regularly clean the ventilation slots in your tool and charger using only a soft
    brush or dry cloth.
    Never open the Cordless Drill case, battery pack or charger.Do not attempt to
    repair the Cordless Drill, battery pack or charger yourself. Opening any of these
    parts will void your warranty.
    DRILLING METAL
    WHEN DRILLING HARD METALS:
    • Apply a lubricant, such as cutting oil, to the tip of the bit.
    • Start with a small hole then enlarge to the required size. Make sure the bit is 
    actually cutting and not spinning in the hole as this will dull the edges of the bit.
    • Keep enough pressure on the bit to keep it drilling through the material.DRILLING MASONRY
    WHEN DRILLING MASONRY:
    • Masonry can be brittle so be careful not to apply too much pressure and crack 
    the material.
    • Apply enough pressure to keep the bit cutting and not spinning in the hole as this
    will dull the edges of the bit.
    • Bricks and similar soft materials will require less pressure, concrete will require
    much more.DRILLING WOOD
    Use twist bits to drill holes in wood. Make sure the bits are sharp. Pull the bits 
    out of the hole frequently to clear chips from the flutes as an overburdened bit 
    may overheat. 
    HINTS FOR OPTIMUM USE
    DRILLING:
    • Keep the right amount of pressure in a straight line with the drill bit. Too little and
    the bit will spin without cutting, too much and the motor may stall.
    • Just before the drill tip breaks though the other side of the work piece drill more
    slowly and decrease pressure on the tool. This will prevent stalling and leave a
    cleaner hole.
    • Use a block of wood to back up work pieces that may splinter.
    • Use spade bits when drilling large diameter holes in wood.
    • Use HSS drill bits when drilling in metal.
    • Use masonry bits when drilling in soft masonry.
    • Use a lubricant when drilling metals other than cast iron, aluminum, copper, 
    and brass.
    • When drilling, start the hole slowly, allowing the bit to drill deep enough to prevent
    slipping at higher speeds.
    15 
    						
    							PROTECTING THE ENVIRONMENT
    BATTERIES
    Alltrade batteries can be recharged many times. At the end of their useful life, 
    recycle batteries with due care for our environment. 
    Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
    or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.
    OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
    Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
    like further information on the following products, please contact Alltrade Customer
    Service Department at 1-800-590-3723. 
    Cordless Drills/Screwdrivers
    Impact Wrenches
    Sanders
    Jigsaws
    Circular Saws
    Angle Grinders
    Reciprocating Saws
    Routers
    Rotary Tools
    Corded and Cordless Multi-Purpose Tools
    Wide Range of Accessories and more
    18
    ACCESSORIES
    Use only accessories that are recommended by the manufacturer for your model.
    Accessories that may be suitable for one tool may become hazardous when used on
    another tool.
    Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
    If you must use an extension cord, be sure that the gauge is large enough to carry
    the amount of current necessary for your power tool.If not, your tool may experi-
    ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
    number, the heavier the cord (see table below).
    RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
    TOOL CURRENT RATING CONDUCTOR SIZE IN A.W.GAMPERE 10FT. 25FT. 50FT. 100FT.
    3-6 18 18 18 186-8 18 18 18 168-10 18 18 18 1410-12 16 16 14 1412-16 14 12 12 -16-20 12 12 12 -
    SPECIFICATIONS
    SPECIFICATIONSVoltage 19.2V Low Speed 0-440/min.High Speed 0-1500/min.Torque Settings 21+ DrillChuck Capacity (max) 13mm (1/2)Charger Input 120V  60HzCharging Time Approx. 1 hourBattery Type Ni-Cad
    17 
    						
    All AllTrade manuals Comments (0)

    Related Manuals for AllTrade Kawasaki 192V Cordless Drill 840131 User Manual