AllTrade Kawasaki 192V Cordless Reciprocating Saw 840089 User Manual

							and 
does 
not 
apply 
to 
products 
and/or 
components 
thereof 
designed, 
manufactured
and/or 
assembled 
by 
others, 
for 
which 
Alltrade 
makes 
no 
warranties 
whatsoever
.
THERE 
ARE 
NO 
WARRANTIES 
WHICH 
EXTEND 
BEYOND 
THE 
DESCRIPTION 
ON
THE 
FACE 
HEREOF
.
Warranty 
Performance 
By 
pur
chasing 
the 
product, 
pur
chaser 
expressly 
acknowledges 
and 
agrees 
that 
their
sole 
and 
exclusive 
remedy 
under 
this 
warranty 
shall 
be 
strictly 
limited 
to 
the 
repair
or 
replacement 
of 
any 
covered 
nonconforming 
items 
or 
parts 
thereof 
provided 
that
any 
such 
nonconforming 
item 
and/or 
part 
is promptly 
returned 
to 
Alltrade’
s facility
postage 
pre-paid 
and 
insured 
(address: 
ALL
TRADE 
Warranty 
Claims 
& 
Repair
, 
1431 
Via 
Plata, 
Long 
Beach, 
CA 
90810, 
Attn: 
Customer 
Ser
vice 
#1-800-590-3723)
within 
the 
applicable 
warranty 
period, 
with 
a written 
request 
by 
pur
chaser 
that
Alltrade 
repair 
and/or 
replace 
the 
nonconforming 
item 
and/or 
part. 
We recommend
that 
you 
keep 
the 
original 
product 
packaging 
in the 
event 
you 
need 
to 
ship 
the 
unit.
We suggest 
the 
package 
be 
insured 
against 
loss 
or 
in 
transit 
damage. 
When 
sending 
your 
product 
include 
your 
name, 
address, 
phone 
number
, dated 
proof 
of 
pur
chase 
(or 
copy), 
and 
a statement 
about 
the 
nature 
of 
problem. 
Warranty 
coverage 
is 
conditioned 
upon 
pur
chaser 
furnishing 
Alltrade 
with 
adequate 
written
proof 
that 
they 
are 
the 
original 
pur
chaser 
and 
of 
the 
original 
pur
chase 
date. 
Parts
returned, 
freight 
prepaid 
and 
insured, 
to 
Alltrade’
s facility 
(see 
above 
address) 
will
be 
inspected 
and, 
at 
Alltrade’
s option, 
repaired 
and/or 
replaced 
free 
of 
charge 
if
found 
to 
be 
defective 
and 
subject 
to 
warranty
. Alltrade 
retains 
the 
sole 
discretion 
to 
determine 
whether 
any 
item 
or 
part 
is 
nonconforming 
and, 
if so, 
whether 
the 
item 
and/or 
part 
will 
be 
repaired 
and/or 
replaced. 
If the 
unit 
is 
repaired, 
new 
or
reconditioned 
replacement 
parts 
may 
be 
used. 
If 
Alltrade 
chooses 
to 
replace 
the 
product, 
it may 
replace 
it with 
a new 
or 
reconditioned 
one 
of 
the 
same 
or 
comparable 
design. 
The 
repaired 
or 
replaced 
unit 
will 
be 
warranted 
under 
the 
terms
of 
the 
remainder 
of 
the 
warranty 
period. 
Typically
, a defective 
product 
that 
is
returned 
within 
the 
first 
30 
days 
after 
the 
pur
chase 
date 
will 
be 
replaced; 
for 
items
returned 
after 
the 
first 
30 
days 
and 
within 
the 
warranty 
period, 
covered 
defective
parts 
not 
subject 
to 
normal 
wear 
and 
tear 
or 
other 
exclusions 
will 
be 
repaired 
or
replaced, 
at Alltrade’
s option. 
During 
the 
warranty 
period, 
Alltrade 
will 
be 
responsi-
ble 
for 
the 
return 
shipping 
charges. 
Alltrade’
s repair 
and/or 
replacement 
of 
any 
non-
conforming item and/or part thereof shall constitute fulfillment of all 
obligations 
to 
the 
pur
chaser
. Alltrade 
shall 
not 
be 
responsible 
or 
liable 
for 
any
expense, 
including 
freight 
charges, 
or 
repairs 
made 
outside 
Alltrade’
s facility
, unless
expressly 
agreed 
to 
by 
Alltrade 
in 
writing. 
Under 
no 
circumstances 
shall 
Alltrade
bear 
any 
responsibility 
for 
loss 
of 
the 
unit, 
loss 
of 
time 
or 
rental, 
inconvenience,
commer
cial 
loss 
or 
consequential 
damages.
20
OTHER 
CONSUMER 
DO-IT
-YOURSELF 
(DIY) 
TOOLS
Alltrade 
offers 
a full 
range 
of 
Kawasaki™ 
tools 
that 
make 
DIY 
jobs 
easy
. If you 
would
like 
further 
information 
on 
the 
following 
products, 
please 
contact 
Alltrade 
Customer
Ser
vice 
Department 
at 1-800-590-3723. 
Cordless 
Drills/Screwdrivers
Impact 
Wrenches
SandersJigsawsCir
cular 
Saws
Angle 
Grinders
Reciprocating 
Saws
RoutersRotar
y Tools
Corded 
and 
Cordless 
Multi-Purpose 
Tools
Wide 
Range 
of 
Accessories 
and 
more
3 YEAR 
LIMITED 
WARRANTY
Express 
and 
Exclusive 
Limited
Warranty 
to 
Original 
Retail 
Buyer
Alltrade 
Tools 
LLC 
(hereinafter 
Alltrade) 
expressly 
warrants 
to 
the 
original 
retail
pur
chaser 
of 
the 
accompanying 
KA
WASAKI™
power 
tool 
and 
no 
one 
else 
all 
parts
of 
the 
product 
(except
those 
parts 
referred 
to 
below 
which 
are 
specifically 
exclud-
ed 
from 
such 
warranty 
(see 
Exclusions)) 
to 
be 
free 
from 
defects 
in 
materials 
and
workmanship 
for 
a period 
of 
three 
years 
from 
original 
date 
of 
pur
chase,
except 
that
such 
warranty 
with 
regard 
to 
the 
batter
y shall 
be
for 
a period 
of 
two 
years 
from
original 
date 
of 
pur
chase,
unless 
the 
tool 
is 
used 
for 
commer
cial 
or 
rental 
purposes.SPECIAL 
WARRANTY 
NOTE 
FOR
COMMERCIAL 
OR 
RENT
AL 
USE:
The 
above 
warranty 
for
this 
Kawasaki™ 
power 
tool, 
including 
the 
batter
y, shall 
be 
effective 
for
only 
90 
days 
from 
the 
original 
date 
of 
pur
chase 
if 
this 
tool 
is 
used 
for 
any 
COMMERCIAL 
OR 
RENT
AL
PURPOSE.
The 
date 
of 
pur
chase 
shall 
be 
the 
date 
of 
shipment 
to 
the 
original 
pur
chaser
, or 
the
date 
the 
original 
pur
chaser 
took 
possession, 
custody 
or 
control 
of 
the 
product,
whichever occurred first.
This warranty shall be null and void if the product or any
component 
thereof 
is 
modified 
or
altered.
This 
warranty 
does 
not 
apply 
to 
any
other 
product 
and/or 
component 
thereof 
manufactured 
or 
distributed 
by 
Alltrade,
19  
						

							WARRANTY 
IS 
MADE 
WITH 
REGARD 
TO 
THIS 
PRODUCT
. ALL 
EXPRESS 
AND/OR
IMPLIED 
WARRANTIES, 
GUARANTIES 
AND/OR 
REPRESENT
ATIONS 
BY 
ALL
TRADE
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
REGARDING 
THE 
DESIGN, 
MANUF
ACTURE,
PURCHASE, 
USE 
AND/OR 
OPERA
TION 
OF 
THE 
PRODUCT 
OR 
ANY 
COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY 
OPERA
TION 
OF 
LA
W 
AND/OR 
EQUITY 
AND/OR 
BY 
ANY 
ACT 
OR 
OMISSION 
OF
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S), 
OR 
THE 
PURCHASER, 
INCLUDING
BUT 
NOT 
LIMITED 
TO 
THE 
IMPLIED 
WARRANTY 
OF 
MERCHANT
ABILITY 
AND 
THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED 
AND 
DISCLAIMED 
BY 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVES.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH 
WARRANTIES 
AND 
RIGHTS, 
CLAIMS 
AND/OR 
CAUSES 
OF 
ACTION 
ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE 
REMEDY 
IS 
AS 
ST
ATED 
ABOVE.
Limitation 
Of 
Liability
IN 
NO 
EVENT 
SHALL 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
BE 
LIABLE 
FOR
INDIRECT
, INCIDENT
AL, 
SPECIAL 
AND/OR 
CONSEQUENTIAL 
DAMAGES 
OF 
ANY
KIND 
ARISING 
OUT 
OF 
OR 
RELA
TED 
TO, 
DIRECTL
Y OR 
INDIRECTL
Y, ANY 
BREACH
OF 
ANY 
PROVISION 
OF 
ANY 
AGREEMENT 
BETWEEN 
ALL
TRADE 
AND/OR 
ITS 
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, 
AND/OR 
THE 
EXISTENCE, 
DESIGN, 
MANUF
ACTURE, 
PURCHASE, 
USE 
AND/OR
OPERA
TION 
OF 
ANY 
ITEM(S) 
SOLD 
HEREUNDER 
EVEN 
IF ALL
TRADE 
AND/OR 
ITS
REPRESENT
ATIVE(S) 
HAS 
BEEN 
ADVISED 
OF 
THE 
POSSIBILITY 
OF 
ANY 
SUCH
DAMAGES. 
IN 
NO 
EVENT
, WHETHER 
AS 
A RESUL
T OF 
A BREACH 
OF 
CONTRACT
,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL 
ALL
TRADE’S 
AND/OR 
ITS 
REPRESENT
ATIVE(S)’ 
LIABILITY 
EXCEED 
THE 
PRICE 
OF
THE 
PRODUCT
. ANY 
AND 
ALL 
LIABILITY 
CONNECTED 
WITH 
THE 
USE 
OF 
THIS 
PRODUCT 
SHALL 
TERMINA
TE 
UPON 
THE 
EXPIRA
TION 
OF 
THE 
WARRANTY
PERIODS 
SPECIFIED 
ABOVE.
Limitations 
on 
Warranty 
Disclaimers 
Some 
states 
do 
not 
allow 
limitations 
on 
how 
long 
an 
implied 
warranty 
lasts 
and 
some 
states 
do 
not 
allow 
the 
exclusion 
or 
limitation 
of 
the 
incidental 
or 
consequential 
damages, 
so 
part 
or 
all 
of 
the 
above 
limitations 
or 
exclusions 
may 
not
apply 
to 
you. 
This 
warranty 
gives 
you 
specific 
legal 
rights, 
and 
you 
may 
also 
have
other 
rights 
which 
var
y from 
state 
to 
state.
If your 
product 
is 
not 
covered 
by 
this 
warranty
, please 
call 
our 
Customer 
Ser
vice
Department 
toll 
free 
at 1-800-590-3723 
for 
general 
repair 
information 
and 
charges. 
 
22
ExclusionsThis 
warranty 
does 
not 
cover 
parts 
damaged 
due 
to 
normal 
wear
, abnormal 
conditions, 
misapplication, 
misuse, 
abuse, 
accidents, 
operation 
at 
other 
than 
recommended 
pressures 
or 
temperatures, 
improper 
storage 
or 
freight 
damage.
Parts 
damaged 
or 
worn 
by 
operation 
in 
dusty 
environments 
are 
not 
warranted.
Failure to follow recommended operating and maintenance procedures also 
voids 
warranty
.
This 
limited 
warranty 
does 
not 
apply 
to 
accessor
y 
items 
such 
as 
drill 
bits, 
screwdriving 
bits, 
circular 
saw 
blades, 
jigsaw 
blades, 
grinding 
wheels, 
sanding
sheets 
and 
other 
related 
items.
DAMAGE 
TO 
THE 
PRODUCT 
RESUL
TING 
FROM 
TAMPERING, 
ACCIDENT
, ABUSE,
NEGLIGENCE, 
FAILURE 
TO 
FOLLOW 
INSTRUCTIONS, 
UNAUTHORIZED 
REP
AIRS
OR 
ALTERA
TIONS, 
DAMAGE 
WHILE 
IN 
TRANSIT 
TO 
OUR 
SERVICE 
FACILITY
, 
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, 
COMMERCIAL 
AND 
RENT
AL 
APPLICA
TIONS 
OR 
OTHER 
CAUSES 
UNRELA
TED 
TO
PROBLEMS 
WITH 
MA
TERIAL 
OR 
WORKMANSHIP 
ARE 
NOT 
COVERED 
BY 
THIS
WARRANTY
.
Alltrade 
will 
not 
be 
liable 
for 
the 
following: 
labor 
charges, 
loss 
or 
damage 
resulting
from improper operation, maintenance or repairs made by other persons; 
pre-delivery services such as assembly, oil or lubricants, and adjustment; 
maintenance 
ser
vices 
that 
are 
normally 
required 
to 
maintain 
the 
product.
The 
use 
of 
other 
than 
genuine 
Alltrade 
Repair 
Parts 
will 
void 
warranty
.
Warranty 
Disclaimers 
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, 
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED 
ABOVE, 
ALL 
OTHER 
EXPRESS 
WARRANTIES, 
GUARANTIES 
AND/OR
REPRESENT
ATIONS 
BY 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S) 
REGARDING
THE 
DESIGN, 
MANUF
ACTURE, 
PURCHASE, 
USE 
AND/OR 
OPERA
TION 
OF 
THE
PRODUCT 
OR 
ANY 
COMPONENT 
THEREOF 
SOLD 
HEREUNDER, 
REGARDLESS 
OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN 
OR 
ORAL, 
ARISES 
BY 
OPERA
TION 
OF 
LA
W 
AND/OR 
EQUITY 
AND/OR 
BY
ANY 
ACT 
OR 
OMISSION 
OF 
ALL
TRADE 
AND/OR 
ITS 
REPRESENT
ATIVE(S), 
OR 
THE
BUYER, 
ARE 
HEREBY 
EXPRESSL
Y EXCLUDED 
AND 
DISCLAIMED 
BY 
ALL
TRADE
AND/OR 
ITS 
REPRESENT
ATIVES. 
PURCHASER 
KNOWINGL
Y 
AND 
WILLINGL
Y
WAIVES 
ANY 
AND 
ALL 
SUCH 
WARRANTIES 
AND 
RIGHTS, 
CLAIMS 
AND/OR 
CAUSES 
OF 
ACTION 
ARISING 
THEREFROM 
OR 
BASED 
THEREON. 
PURCHASER’S
SOLE 
AND 
EXCLUSIVE 
REMEDY 
IS 
AS 
ST
ATED 
ABOVE.
EXCLUSION 
AND 
DISCLAIMER 
OF 
ALL 
IMPLIED 
WARRANTIES, 
INCLUDING 
THE
IMPLIED 
WARRANTIES 
OF 
MERCHANT
ABILITY 
AND 
FITNESS 
FOR 
A PARTICULAR
PURPOSE. 
NO 
WARRANTY
, ORAL 
OR 
WRITTEN, 
OTHER 
THAN 
THE 
ABOVE 
21  
						

							
TNENOPMOCRH1-980048#
V2.91DEEPS-2DETAREPO-YRETTABLLIRD
NOITCURTSNILAUNAM

ROFREMOTSUCECIVRES
RUOPELECIVRESSÉRPAETNEVUOUDRUETAMMOSNOC
ARAPLEOICIVRESARAPLERODIMUSNOC
3273-095-008-1
detnirPnianihC

75906-4091-78
AKW™IKASASIAKRAMEDARTDESNECILYBAKW™IKASASROTOMPROC,.,.A.S.UHCIHWSEODTONFUNAMERUTCAROETUBIRTSIDSIHTTCUDORP.REMUSNOCSERIUQNIDLUOHSEBDETCERID:OTTHGIRYPOC©6002LLAEDART,SLOOT.CLL1341AIVALPTAGNOL,HCAEBAC2641-01809ASU980048–V2.91neerGsseldroCveR_llirD60/62/8
THISMANUALCONTAINSIMPORTANTINFORMATIONREGARDINGSAFETY,OPERATION,
MAINTENANCEANDSTORAGEOFTHISPRODUCT.BEFOREUSE,READCAREFULLYAND
TSREDNUDNALLA,SNOITUACW,SGNINRARTSNISNOITCUDNATCUDORP.SLEBALFERULIAOTOD
OSDLUOCLUSERTNISUOIRESLANOSREPRUJNIYRO/DNAREPORPYT.EGAMAD
FIUOYDLUOHSAHEVYNASNOITSEUQROECNEIREPXEAMELBORPHTIWRUOYLLAEDART
TCUDORP,ODTONNRUTERSIHTTCUDORPOTEHT.EROTSESAELPLLACRUOREMOTSUCECIVRES
PEDRATNEMTAT3273-095-008-1.EROFEBUOY,LLACAHEVEHTGNIWOLLOFAMROFNINOIT
AVAILABLE:MODELNo.,DATEPURCHASEDANDSTORELOCATION.ANALLTRADE
TNESERPERAEVITNACLOSEREVRUOYMELBORPREVOEHT.ENOHPFIUOYDLUOWEKILOTEKAM
ANOITSEGGUSROTNEMMOC,EVIGSUALLACROLIAMESUAT:[email protected]
RUOYKCABDEEFSITIVLAOT.SU 
						

							SECTION 
FOUR
MAINTENANCE 
AND 
CLEANING
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
ACCESSORIES
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
SPECIFICA
TIONS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
PROTECTING 
THE 
ENVIRONMENT
 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
OTHER 
CONSUMER 
DO-IT
-YOURSELF 
(DIY) 
TOOLS
 . . . . . . . . . . . . . .
18
SECTION 
FIVE
3 YEAR 
LIMITED 
WARRANTY
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19-22
CONGRA
TULA
TIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products 
at 
an 
affordable 
price, 
and 
we 
want 
you 
to 
be 
totally 
satisfied 
with 
your
product 
and 
our 
Customer 
Ser
vice. 
If 
any 
help 
and 
advice 
is 
needed, 
please 
contact 
us 
at 
1-800-590-3723. 
Properly 
cared 
for
, this 
tool 
will 
give 
you 
many 
years 
of 
satisfaction.
INTENDED 
USE
This 
tool 
is intended 
for 
consumer 
use 
only
. Your 
charger 
and/or 
adapter 
has 
been
designed 
for 
charging 
batteries 
of 
the 
type 
approved 
and 
supplied 
with 
this 
tool.
GENERAL 
SAFETY 
RULES 
– FOR 
ALL 
BA
TTER
Y OPERA
TED 
TOOLS
READ 
AND 
UNDERST
AND 
ALL 
INSTRUCTIONS.
Failure 
to
follow 
all 
instructions 
listed 
below 
may 
result 
in 
electric 
shock, 
fire 
and/or 
serious 
personal 
injur
y.
RECOGNIZE 
SAFETY 
SYMBOLS, 
WORDS 
AND 
LABELS
The safety instructions provided in this manual are not intended to cover all possible
conditions 
and 
practices 
that 
may 
occur 
when 
operating, 
maintaining 
and 
cleaning
power 
tools.
Always 
use 
common 
sense 
and 
pay 
particular 
attention 
to 
all 
the 
DANGER
, 
WARNING
, CAUTION
and 
NOTE
statements 
of 
this 
manual.
This 
is the 
safety 
alert 
symbol. 
It is used 
to 
alert
you 
to 
potential 
personal 
injur
y hazards. 
Obey 
all
safety 
messages 
that 
follow 
this 
symbol 
to 
avoid
possible 
injur
y or 
death.
TABLE 
OF 
CONTENTS
CONGRA
TULA
TIONS!
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
INTENDED 
USE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
SECTION 
ONE
GENERAL 
SAFETY 
RULES 
– FOR 
ALL 
BA
TTER
Y OPERA
TED 
TOOLS
 . .2
RECOGNIZE 
SAFETY 
SYMBOLS, 
WORDS 
AND 
LABELS
 . . . . . . . .
2-3
IMPOR
TANT 
SAFEGUARDS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
WORK 
AREA
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
ELECTRICAL 
SAFETY
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
PERSONAL 
SAFETY
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5
TOOL 
USE 
AND 
CARE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
SERVICE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
SECTION 
TWO
SPECIFIC 
SAFETY 
RULES 
AND/OR 
SYMBOLS
 . . . . . . . . . . . . . . . . . . .
6
SAFETY 
RULES 
FOR 
CORDLESS 
DRILL/DRIVERS
 . . . . . . . . . . . . .
6-7
SYMBOLS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
SECTION 
THREE
FUNCTIONAL 
DESCRIPTION
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
BA
TTER
Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-11
REMOVING/A
TTACHING 
BA
TTER
Y PACK
 . . . . . . . . . . . . . . . . . . . .
10
CHARGER
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
CHARGING 
BA
TTER
Y PACK
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
ASSEMBL
Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-12
INST
ALLING 
DRILL 
BIT 
INTO 
KEYLESS 
CHUCK
 . . . . . . . . . . . . . .
12
OPERA
TING 
THE 
CORDLESS 
DRILL
 . . . . . . . . . . . . . . . . . . . . . . . . . . .
12-15
VARIABLE 
SPEED 
TRIGGER 
SWITCH . . . . . . . . . . . . . . . . . . . . . . .
13
FORW
ARD
/REVERSE 
AND 
TRIGGER 
LOCK 
LEVER
 . . . . . . . . . . . .
13
TORQUE 
SETTINGS
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13-14
HIGH/LOW 
SPEED 
(GEAR) 
SHIFTING
 . . . . . . . . . . . . . . . . . . . . . .
14
SCREWDRIVING
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
DRILLING 
MET
AL
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
DRILLING 
MASONR
Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
DRILLING 
WOOD
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
HINTS 
FOR 
OPTIMUM 
USE
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15-16
2
1  
						

							DANGER
indicates an imminently hazardous 
situation 
which, 
if not 
avoided, 
will 
result 
in death
or 
serious 
injur
y.
WARNING
indicates a potentially hazardous 
situation 
which, 
if not 
avoided, 
could 
result 
in
death 
or 
serious 
injur
y.
CAUTION
indicates a potentially hazardous 
situation 
which, 
if 
not 
avoided, 
may 
result 
in
minor 
or 
moderate 
injur
y.
CAUTION
used 
without 
the 
safety 
alert 
symbol
indicates 
a potentially 
hazardous 
situation 
which,
if not 
avoided, 
may 
result 
in property 
damage.
NOTEprovides additional information that is useful
for 
proper 
use 
and 
maintenance 
of 
this 
tool. 
If a
NOTE 
is indicated 
make 
sure 
it is fully 
understood.
IMPOR
TANT 
SAFEGUARDS
People 
with 
electronic 
devices, 
such 
as 
pacemakers, 
should 
consult 
their
physician(s) 
before 
using 
this 
product. 
Operation 
of 
electrical 
equipment 
in
close 
proximity 
to 
a heart 
pacemaker 
could 
cause 
interference 
or 
failure 
of
the 
pacemaker
.
WARNING:
Some 
dust 
created 
by 
power 
sanding, 
sawing, 
grinding, 
drilling 
and
other 
construction 
activities 
contains 
chemicals 
known 
to 
the 
State 
of 
California
to 
cause 
cancer
, birth 
defects 
or 
other 
reproductive 
harm.
Some 
examples 
of 
these 
chemicals 
are:
• Lead 
from 
lead-based 
paints. 
• Crystalline 
silica 
from 
bricks 
and 
cement 
and 
other 
masonr
y products,
and 
arsenic 
and 
chromium 
from 
chemically-treated 
lumber
.
Your 
risk 
from 
these 
exposures 
varies, 
depending 
on 
how 
often 
you 
do 
this 
type
of 
work. 
To reduce 
your 
exposure 
to 
these 
chemicals: 
work 
in 
a well 
ventilated
area, 
and 
work 
with 
approved 
safety 
equipment, 
such 
as 
dust 
masks 
that 
are
specially 
designed 
to 
filter 
out 
microscopic 
particles.
WARNING: 
Handling 
the 
power 
cord 
on 
corded 
products 
may 
expose 
you 
to
lead, 
a chemical 
known 
to 
the 
State 
of 
California 
to 
cause 
cancer 
and 
birth
defects 
or 
other 
reproductive 
harm.
Wash 
hands 
after 
handling.
SA
VE 
THESE 
INSTRUCTIONS 
FOR 
FUTURE 
REFERENCE.
WORK 
AREA
Keep 
your 
work 
area 
clean 
and 
well 
lit.
Cluttered 
work 
benches 
and 
dark 
work
areas 
may 
cause 
accidents 
or 
injur
y.
Do 
not 
operate 
power 
tools 
in 
explosive 
areas, 
such 
as 
in 
the 
presence 
of 
flammable 
liquids, 
gases 
or 
dust. 
Power 
tools 
create 
sparks 
which 
may 
ignite
the 
dust 
or 
fumes.
Keep 
bystanders, 
children 
and 
visitors 
away 
while 
operating 
a power 
tool.
Distractions 
can 
cause 
you 
to 
lose 
control. 
ELECTRICAL 
SAFETY
Do 
not 
abuse 
the 
cord. 
Never 
use 
the 
cord 
to 
carr
y the 
tool. 
Keep 
the 
cord
away 
from 
heat, 
oil, 
sharp 
edges, 
or 
moving 
parts. 
Replace 
damaged 
cords
immediately
.Damaged 
cords 
may 
create 
a fire.
A batter
y operated 
tool 
with 
integral 
batteries 
or 
a separate 
batter
y pack
must 
be 
recharged 
only 
with 
the 
specified 
charger 
for 
the 
batter
y.A charger
that 
may 
be 
suitable for one type of battery may create a risk of fire when used with
another battery.
Use battery operated tool only with specifically designatedbatter
y pack.
Use 
of
any 
other 
batteries 
may 
create 
risk 
of 
fire.
PERSONAL 
SAFETY
Stay 
alert, 
watch 
what 
you 
are 
doing, 
and 
use 
common 
sense 
when 
operat-
ing 
a power 
tool. 
Do 
not 
use 
tool 
while 
tired 
or 
under 
the 
influence 
of 
drugs,
alcohol 
or 
medication.
A moment 
of 
inattention 
while 
operating 
power 
tools
may 
result 
in serious 
personal 
injur
y.
Dress 
properly
. Do 
not 
wear 
loose 
clothing 
or 
jewelr
y. Contain 
long 
hair
.
Keep 
your 
hair
, clothing, 
and 
gloves 
away 
from 
moving 
parts.
Loose 
clothes,
jewelr
y or 
long 
hair 
can 
be 
caught 
in moving 
parts. 
Avoid accidental starting. Be sure switch is in the locked or “OFF”position
before inserting battery pack. Carrying power tools with your finger on the switch
or inserting battery pack into a tool with the power switch “ON”invites accidents.
4  
						

							SERVICE
Tool 
ser
vice 
must 
be 
performed 
only 
by 
qualified 
repair 
personnel.
Ser
vice 
or
maintenance 
by 
unqualified 
personnel 
may 
result 
in a risk 
of 
injur
y. 
When 
ser
vicing 
a tool, 
use 
only 
identical 
replacement 
parts. 
Follow 
instructions
in 
the 
Maintenance 
section 
of 
this 
manual. 
Use 
of 
unauthorized 
parts 
or 
failure 
to
follow 
Maintenance 
Instructions 
may 
create 
a risk 
of 
shock 
or 
injur
y.
SPECIFIC 
SAFETY 
RULES 
AND/OR 
SYMBOLS
Hold 
tool 
by 
insulated 
gripping 
surfaces 
when 
perform-
ing 
an 
operation 
where 
the 
cutting 
tool 
may 
contact 
hidden 
wiring.
Contact
with 
a “live” 
wire 
will 
also 
make 
exposed 
metal 
parts 
of 
the 
tool 
“live” 
and 
shock
the 
operator
.SAFETY 
RULES 
FOR 
CORDLESS 
DRILL 
/ DRIVERS
Always 
wear 
safety 
goggles 
or 
eye 
protection 
when 
using 
this 
tool.
Use 
a
dust 
mask 
or 
respirator 
for 
applications 
which 
generate 
dust. 
Do 
not 
grasp 
the 
tool 
or 
place 
your 
hands 
too 
close 
to 
the 
spinning 
chuck 
or
drill 
bit. 
Your 
hand 
may 
be 
lacerated 
or 
may 
cause 
injur
y.
Secure 
the 
material 
being 
worked 
on. 
Never 
hold 
it in 
your 
hand 
or 
across
your 
legs. 
Unstable 
support 
can 
cause 
loss 
of 
control 
and 
injur
y.
Position 
yourself 
to 
avoid 
being 
caught 
between 
the 
tool 
or 
side 
handle 
and
walls 
or 
posts.
Should 
the 
socket 
or 
bit 
become 
bound 
in 
the 
work, 
the 
reaction 
torque 
of 
the 
tool 
could 
crush 
your 
hand 
or 
leg.
Check 
to 
see 
that 
keys 
and 
adjusting 
wrenches 
are 
removed 
from 
the
Cordless 
Drill 
before 
switching 
the 
tool 
“ON”.
Keys 
or 
wrenches 
can 
fly 
away
at high 
velocity 
striking 
you 
or 
a bystander
.
When using the Cordless Drill, always maintain a firm grip on the tool with both
hands.
Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.
Do 
not 
run 
the 
Cordless 
Drill 
while 
carr
ying 
it 
at 
your 
side.
A 
spinning 
socket 
or 
bit 
could 
become 
entangled 
with 
clothing 
and 
injur
y may 
result.
Disconnect the plug or remove the battery pack from tool and place the switch
in the locked or “OFF” position before making any assembly adjustments,
changing accessories, performing any inspection, maintenance or cleaning
procedures. Such 
preventive 
safety 
measures 
reduce 
the 
risk 
of 
starting 
the
tool 
accidentally
.
Remove adjusting keys or wrenches before turning the tool “ON”.A wrench or a
key that is left attached to a rotating part of the tool m
ay result in personal injury.
Do 
not 
overreach. 
Keep 
proper 
footing 
and 
balance 
at 
all 
times. 
Proper 
foot-
ing 
and 
balance 
enable 
better 
control 
of 
the 
tool 
in unexpected 
situations.
Use 
safety 
equipment. 
Always 
wear 
eye 
protection. 
Dust mask, non-skid safe-
ty shoes, hard hat, or hearing protection m
ust be used for appropriate conditions.
TOOL 
USE 
AND 
CARE
Use 
clamps 
or 
other 
practical 
ways 
to 
secure 
and 
support 
the 
workpiece 
to 
a 
stable 
platform.
Holding 
the 
work 
by 
hand 
or 
against 
your 
body 
is unstable 
and
may 
lead 
to 
loss 
of 
control.
Do 
not 
force 
tool. 
Use 
the 
correct 
tool 
for 
your 
application.
The 
correct 
tool
will 
do 
the 
job 
better 
and 
safer 
at the 
rate 
for 
which 
it is designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch in the locked or “OFF”posi-
tion before making any adjustments, changing accessories, or storing the tool.
Such preventative safety m
easures reduce the risk of starting the tool accidentally.
Store 
idle 
tools 
out 
of 
reach 
of 
children 
and 
other 
untrained 
persons.
Tools
are 
dangerous 
in the 
hands 
of 
untrained 
users.
When 
batter
y pack 
is not 
in 
use, 
keep 
it away 
from 
other 
metal 
objects 
like:
paper 
clips, 
coins, 
keys, 
nails, 
screws, 
or 
other 
small 
metal 
objects 
that 
can
make 
a connection 
from 
one 
terminal 
to 
another
. Shorting 
the 
batter
y termi-
nals 
together 
may 
cause 
sparks, 
burns 
or 
a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control. 
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation.If damaged, have the tool
serviced before using.Many accidents are caused by poorly m
aintained tools.
Use 
only 
accessories 
that 
are 
recommended 
by 
the 
manufacturer 
for 
your
model.
Accessories 
that 
may 
be 
suitable 
for 
one 
tool 
may 
create 
a risk 
of 
injur
y
when 
used 
on 
another 
tool.
5
6  
						

							FUNCTIONAL 
DESCRIPTION
CONTROLS 
AND 
COMPONENTS:
1. 
Batter
y Pack
2. 
Release 
Buttons 
on 
Each 
Side
3. 
Charger
4. 
Indicator 
Lights
5. 
12.7mm 
(1/2) 
Keyless 
Chuck
6. 
22 
Adjustable 
Torque 
Settings
Control 
Ring
7. 
For
ward/Reversing 
and 
Trigger 
Lock 
Lever
COMPONENT
MODEL 
NUMBER
BA
TTER
Y PACK
690549
CHARGER
690543
12.7mm 
(1/2) 
KEYLESS 
CHUCK
6905528
Do 
not 
use 
the 
Cordless 
Drill 
if it has 
been 
damaged, 
left 
outdoors 
in 
the
rain, 
snow
, wet 
or 
damp 
environments, 
or 
immersed 
in 
liquid.
Maintain 
labels 
and 
nameplates 
on 
the 
Cordless 
Drill.
These 
carr
y important
information. 
If unreadable 
or 
missing, 
contact 
Alltrade 
for 
a replacement.
SYMBOLS
IMPOR
TANT
: Some 
of 
the 
following 
symbols 
may 
be 
used 
on 
your 
tool. 
Please
study 
them 
and 
learn 
their 
meaning. 
Proper 
interpretation 
of 
these 
symbols 
will
allow 
you 
to 
operate 
the 
tool 
better 
and 
safer
.
SYMBOL
NAME
EXPLANA
TION
V
Volts
Voltage 
(Potential)
A
Amperes
Current
Hz
Hertz
Frequency 
(Cycles 
per 
Second)
W
Watt
Power
Kg
Kilograms
Weight
Alternating 
Current
Type 
of 
Current
Direct 
Current
Type 
of 
Current
Alternating 
or 
Direct 
Current
Type 
of 
Current
Earthing 
Terminal
Grounding 
Terminal
Class 
II Construction
Denotes 
Double 
Insulation
min
Minutes
Time
s
Seconds
Time
!
Diameter
Size 
of 
Drill 
Bits, 
Grinding 
Wheels, 
etc.
No 
load 
speed
No-load 
Rotational 
Speed
.../min
Revolutions 
per 
Minute
Revolutions, 
Sur
face 
Speed, 
Strokes, 
etc. 
per 
Minute
1,2,3, 
…
Ring 
Selector 
Settings
Speed, 
Torque 
or 
Position 
Settings
8. 
High/Low 
Speed 
Switch
9. 
Variable 
Speed 
Controlled 
Trigger 
Switch
10. 
Accessor
y/Bit 
Holder
11. 
Comfort 
Rubber 
Grip
ACCESSORIES:12. 
Double 
Ended 
Screwdriver 
Bits 
(2)11
12
10
5
6
8
9
7
2
1
3
4
7  
						

							BA
TTER
Y
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings 
on 
batter
y pack, 
batter
y
charger 
and 
product 
using 
batter
y.
Do not incinerate the battery pack even if it is severely dam-
aged or is completely worn out.The battery pack can explode.
Do 
not 
carr
y batter
y packs 
in 
aprons, 
pockets, 
or 
tool
boxes, 
product 
kit 
boxes, 
drawers, 
etc. 
with 
loose 
metal 
objects.
Batter
y
pack 
terminals 
could 
be 
short 
circuited 
causing 
damage 
to 
the 
batter
y pack,
severe 
burns 
or 
fire.
The 
batter
y pack 
is Nickel-Cadmium 
(Ni-Cad) 
and 
is considered 
to 
be 
a toxic
material 
by 
the 
Environmental 
Protection 
Agency
.Before 
disposing 
of 
dam-
aged 
or 
worn 
out 
Ni-Cad 
batter
y packs, 
check 
with 
your 
State 
Environmental
Protection 
Agency 
to 
find 
out 
about 
special 
restrictions 
on 
the 
disposal 
of 
these
batter
y packs, 
take 
them 
to 
your 
local 
recycling 
center 
for 
proper 
disposal, 
or
call 
1-800-822-8837
.
The 
batter
y is 
not 
fully 
charged. 
Before 
first 
use, 
the 
batter
y pack 
requires 
3-5 
hours 
charge 
time 
to 
be 
fully 
charged. 
Subsequent 
recharging 
needs 
1 hour
for 
the 
batter
y to 
be 
fully 
charged. 
Always 
switch 
to 
a fresh 
batter
y when 
tool 
performance 
begins 
to 
diminish.
Severe heat is most destructive to a battery; the more heat generated, the faster
the battery loses power. A battery that gets too hot can have a shortened life. 
Never 
over
-discharge 
a batter
y by 
using 
the 
tool 
even 
after 
tool 
performance
has 
decreased.
Do 
not 
attempt 
to 
discharge 
a tool’
s batter
y by 
continuing 
to
pull 
on 
the 
tool 
trigger
. When 
tool 
per
formance 
begins 
to 
diminish, 
stop 
the 
tool
and 
recharge 
the 
batter
y for 
optimal 
per
formance.
Charge 
batter
y pack 
at 
ambient 
temperatures 
between 
50°
F – 104°
F. 
Store 
tool 
and 
batter
y pack 
in 
locations 
where 
temperatures 
will 
not 
exceed
120°F
. This 
is important 
to 
prevent 
serious 
damage 
to 
the 
batter
y cells.
The 
batter
y pack 
should 
always 
be 
recharged 
when 
the 
Cordless 
Drill 
begins 
to
run 
slowly
. 
When 
batter
y pack 
is 
not 
in 
use, 
keep 
it away 
from 
other 
metal 
objects 
such 
as
paper 
clips, 
coins, 
keys, 
nails, 
screws 
or 
other 
small 
metal 
objects 
that 
can
make 
a connection 
from 
one 
terminal 
to 
another
.Shorting 
the 
batter
y terminals
together 
may 
cause 
sparks, 
burns, 
or 
fire. 
 
REMOVING/A
TTACHING 
BA
TTER
Y PACK
REMOVE 
BA
TTER
Y PACK:
1. 
Press 
both 
release 
buttons 
on 
either
side 
of 
the 
Cordless 
Drill 
to 
release 
the 
batter
y pack.
2. 
Pull 
batter
y pack 
free 
of 
Cordless 
Drill.
ATTACH 
BA
TTER
Y PACK:
1. 
Align 
the 
raised 
portion 
of 
the 
batter
y
pack 
with 
the 
groove 
in the 
batter
y
compartment 
of 
the 
Cordless 
Drill.
2. 
Press 
the 
batter
y pack 
into 
place. 
Make 
sure 
the
latches 
are 
securely 
fastened. 
Do 
not 
use 
the 
Cordless 
Drill 
if the 
batter
y pack 
is 
not 
seated 
properly
.  
CHARGER
Before 
using 
batter
y charger
, please 
read 
carefully 
all
instructions 
and 
cautionar
y markings 
on 
batter
y charger
, batter
y pack 
and
product 
using 
batter
y.
Use 
only 
the 
charger 
which 
accompanied 
your 
product 
or 
direct 
replacement 
as
listed 
in 
this 
manual.
Do 
not 
substitute 
any 
other 
charger
. Use 
only 
Alltrade
approved 
chargers 
with 
your 
product.
Do 
not 
disassemble 
charger
.
Do 
not 
use 
charger 
if it has 
been 
damaged, 
left 
outdoors 
in 
the 
rain, 
snow
, wet
or 
damp 
environments, 
or 
immersed 
in 
liquid.
The 
batter
y pack 
and 
charger 
heat 
during 
charging. 
Place 
the 
charger 
on 
a flat, 
non-flammable 
sur
face 
away 
from 
flammable 
materials 
with 
at 
least 
four 
inches 
of
clearance 
to 
allow 
proper 
air 
circulation 
around 
the 
charger 
and 
batter
y pack.
When 
the 
batter
y pack 
requires 
recharging, 
a 1 hour 
charge 
allows 
the 
tool 
to
operate 
at 
full 
power
.A charging 
indicator 
light 
on 
the 
charger 
will 
illuminate 
to
show 
that 
charging 
is taking 
place. 
10
®
RELEASE BUTTON  
						

							CHARGING 
BA
TTER
Y PACK
CHARGE 
BA
TTER
Y PACK:
1. 
Plug 
the 
charger 
into 
the 
nearest 
120 
volt 
electrical 
outlet.
2. 
Make 
sure 
the 
trigger 
on 
the 
Cordless 
Drill 
is in the 
“OFF”
position 
and 
remove 
the 
batter
y pack 
from 
the 
Cordless 
Drill.
3. 
Insert 
the 
batter
y pack
into 
the 
charger
. Be 
sure
that 
the 
batter
y pack 
is
fully 
seated 
in the 
charger
. 
Do 
not 
for
ce. 
4. 
The 
red 
indicator 
light 
should 
come 
“ON”
indicating 
that 
the 
batter
y pack 
is in
a “Fast 
Charge” 
mode. 
If the 
green 
indicator 
light 
comes 
“ON”
, then 
the 
batter
y
is already 
fully 
charged.
5. 
After 
approximately 
one 
hour 
of 
charging, 
the 
red 
indicator 
light 
should 
go
“OFF” 
and 
the 
green 
light 
should 
come 
“ON” 
indicating 
that 
the 
batter
y is fully
charged 
and 
the 
charger 
is now 
in a “Trickle 
Charge” 
mode.
6. 
The 
batter
y can 
be 
left 
in a “Trickle 
Charge” 
mode 
until 
ready 
to 
use.
IMPOR
TANT 
INFORMA
TION 
FOR 
RECHARGING 
HOT 
BA
TTERIES
When 
using 
your 
Cordless 
Drill 
continuously
, the 
batteries 
in 
your 
batter
y pack 
will 
become 
hot. 
You 
should 
let 
a hot 
batter
y pack 
cool 
down 
for 
approximately 
30 
minutes 
before 
attempting 
to 
recharge. 
When 
the 
batter
y 
pack 
becomes 
discharged 
and 
is 
hot, 
the 
red 
light 
on 
the 
charger 
will 
flash. 
When 
the 
batter
y 
pack 
cools 
down, 
the 
red 
light 
will 
glow 
continuously 
to 
indicate 
fast 
charging
mode, 
1-hour 
charge 
time.This 
will 
occur 
when 
continuous 
use 
of 
your 
Cordless
Drill 
causes 
the 
batter
y pack 
to 
become 
hot. 
It does 
not 
occur 
under 
normal
circumstances.
ASSEMBL
Y
Be aware that this tool is always in an operating condition
because 
it does 
not 
have 
to 
be 
plugged 
into 
an 
electrical 
outlet.
Always 
turn
the 
switch 
“OFF”
and 
remove 
the 
batter
y pack 
before 
changing 
bits.
INST
ALLING 
DRILL 
BIT 
INTO 
KEYLESS 
CHUCK
Before 
inserting 
a drill 
bit 
or 
other 
accessor
y,make 
sure 
the 
for
ward/reverse
and 
trigger 
lock 
lever 
is in the 
center 
“OFF”
position 
to prevent 
accidental 
starts
that 
may 
result 
in injur
y.
Do 
not 
attempt 
to 
tighten 
drill 
bits 
(or 
any 
other 
accessor
y) 
by 
gripping 
the
front 
of 
the 
chuck 
and 
turning 
the 
tool 
on.
This 
may 
cause 
personal 
injur
y
and/or 
damage 
to 
the 
chuck.
When 
removing 
the 
bit 
from 
the 
tool, 
avoid 
contact 
with 
skin 
and 
use 
proper
protective 
gloves 
when 
grasping 
the 
bit 
or 
accessor
y.Accessories 
may 
be 
hot
after 
prolonged 
use.
1. 
Hold 
the 
rear 
end 
of 
the 
chuck 
in one 
hand 
and 
use 
the 
other
hand 
to 
rotate 
the 
front 
end 
in a
counter
clockwise 
direction 
to
open 
the 
jaws 
of 
the 
chuck.
2. 
Insert 
the 
shank 
of 
the 
bit 
(or
other 
accessor
y) 
fully 
into 
the
keyless 
chuck, 
taking 
care 
to
keep 
the 
bit 
in the 
center 
of 
the 
jaws 
of 
the 
chuck.
3. 
Turn 
the 
front 
end 
of 
the 
chuck 
clockwise 
to 
hold 
the 
bit 
in place.
4. 
Tighten 
securely 
by 
turning 
the 
front 
end 
of 
the 
chuck 
clockwise 
while 
holding
the 
rear 
end.
OPERA
TING 
THE 
DRILL
Never 
tape 
the 
trigger 
switch 
down 
to 
provide 
continu-
ous 
high 
speed.
The 
tool 
may 
fail 
under 
such 
conditions 
causing 
fire 
or 
personal 
injur
y.
W
ARNING
12
BATTERY PACK
LED
LIGHT
BATTERY
CHARGER
TIGHTEN
LOOSEN
HOLD  
						

							THE 
CONTROL 
RING 
ADJUSTS 
THE 
LEVEL 
OF 
TORQUE:
• For 
light 
duty 
work, 
use 
lower 
settings.
• For 
heavy 
duty 
work, 
use 
higher 
settings.
PROPER 
SETTING 
FOR 
DRIVING 
SCREWS:
1. 
Set 
the 
ring 
on 
the 
lowest 
setting 
to 
begin.
2. 
Try tightening 
the 
first 
screw
. 
If the 
drill 
drives 
smoothly
, 
proceed 
with 
the 
next 
screw
.
3. 
If the 
Drill’
s clutch 
slips, 
increase 
the 
torque 
setting 
and 
try again 
until 
the 
Drill 
drives 
the 
screw 
without 
incident.
HIGH/LOW 
SPEED 
(GEAR) 
SHIFTING
FOR 
LOW 
SPEED 
SETTING:
• Slide 
the 
switch 
on 
top 
of 
the 
Drill 
to 
Position 
1 for 
high
torque 
applications 
and 
driving
screws.FOR 
HIGH 
SPEED 
SETTING:
• Slide 
the 
switch 
to 
Position 
2 
for 
light 
duty 
projects.
SCREWDRIVING
WHEN 
DRIVING 
FASTENERS:
• Always 
start 
slowly 
and 
gradually 
increase 
the 
speed 
of 
the 
Drill. 
• Release 
the 
trigger 
when 
you 
feel 
the 
clutch 
slip.
• Always 
keep 
the 
driver 
bit 
straight 
to 
prevent 
damage 
to 
the 
screw
. 
• Hold 
the 
Drill 
with 
both 
hands 
to 
ensure 
control 
if the 
bit 
should 
stick 
or 
slip.
• To prevent 
wood 
from 
splitting, 
drill 
pilot 
holes 
into 
the 
wood 
before 
driving 
in the 
screws.
14
VARIABLE 
SPEED 
TRIGGER 
SWITCH
THIS 
TOOL 
IS 
CONTROLLED 
BY 
A TRIGGER 
SWITCH:
• The 
speed 
of 
the 
Cordless 
Drill 
depends 
on 
the 
amount 
of 
pressure 
you 
put 
on 
the
trigger
.
• The 
more 
pressure 
you 
apply
, the 
faster
the 
Cordless 
Drill 
 will 
go.
• Release 
the 
pressure 
and 
the 
Cordless 
Drill
will 
slow 
down. 
FORW
ARD
/REVERSE 
AND 
TRIGGER 
LOCK 
LEVER
Be 
sure 
the 
trigger 
is 
released 
when 
changing 
the 
position 
of 
the 
lever
.
Always 
store 
the 
tool 
in the
“LOCKED/OFF”
position.
Always 
check 
the 
direction 
of 
the 
Cordless 
Drills 
rotation 
before 
use.
TO 
SELECT 
THE 
DIRECTIONS 
OF 
ROT
ATION:
• To select 
for
ward 
Cordless 
Drill 
rotation, 
press 
the 
trigger 
lock 
from 
left 
to 
right 
flat 
against 
the 
Cordless
Drill 
body
.
• To select 
reverse, 
press 
the 
trigger 
lock
lever 
in the 
opposite 
direction.
• The 
center 
position 
locks 
the 
tool.TORQUE 
SETTINGS
To prevent 
damaging 
the 
tool 
or 
driving 
screw 
too 
deep
into 
work 
piece, 
release 
the 
trigger 
when 
you 
feel 
the 
clutch 
slip.
13
TRIGGER
LOCK
TRIGGER
SWITCH
HIGH SPEED
LOW SPEEDCONTROL RING