AllTrade Tradespro 3 Gal Air Compressor 835408 User Manual

Model #835408
AIR COMPRESSOR
3 Gallon / 1.5 Peak HP
226892
If you encounter any problems or difficulties, Do not return your compressor to the store!
Please contact our toll-free customer service department at:
1-800-423-3598 • 1-310-522-9008 (California Only) • www.powerbuilttools.com  

It is the owner and/or operator’s responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label
and instruction manual prior to operation of this unit. The owner/operator shall retain product instructions for future reference.
The owner and/or operator is responsible for maintenance, maintaining all decals or warning labels and while in use, maintaining the unit in
good working order. If the owner and/or operator is not fluent in English, Spanish, or French,...

Duty Cycle:
This air compressor pump is capable of running continuously. However, in order to prolong the life of your air compressor, it is recommended
that a 50% to 75% average duty cycle be maintained. Duty cycle refers to the percentage of time a compressor can safely run within a given
amount of time expressed as a ratio. Example: Oil lubricated compressors are typically rated at a 50% duty cycle, meaning that the compressor
motor can run about 50% of the total time it is being used to supply air to...

INTRODUCTION
This oil lubricated air compressor is designed for Household Use Only and is not intended for commercial applications. It is well suited for do-it-
yourselfers with a variety of automotive and home uses.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information...

SAFETY WARNINGS
READ ALL SAFETY WARNINGS BEFORE USING AIR COMPRESSOR.
GENERAL SAFETY WARNINGS:
•Keep work area clean. Messy areas and cluttered workbenches invite personal injury and/or property damage.
•Keep children and visitors away. All children should be kept away from the work area. DO NOT let children handle the compressor or
extension cord. Maintain a safe distance for any person near the work area.
•Operating any tools or equipment under the influence of drugs, alcohol, or medication can cause...

DRAIN LIQUID FROM AIR TANK DAILY
• Use the drain valve located on the bottom of the lower air tank to drain. Failure to properly drain liquid from the tank will cause rust from
moisture buildup, which weakens the tank and could lead to a violent tank explosion. Periodically inspect the tanks for unsafe conditions
such as corrosion, cracked welds, and leaks.
• Release air slowly when draining moisture or depressurizing the air compressor. Fast moving air will stir up dust, dirt and debris that may
be...

RISK OF FALLING
Portable air compressors can fall from a table, workbench, or roof causing damage to the compressor and could result in serious injury or
death to the operator. Always operate air compressor in a stable and secure position to prevent accidental movement of the unit. Never
operate air compressor on a roof or other elevated position. Use additional air hose to reach high locations.
RISK OF PROPERTY DAMAGE WHEN TRANSPORTING COMPRESSOR
Oil can leak or spill and could result in fire or...

IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN RESULT IN A RISK OF ELECTRIC SHOCK. IF REPAIR OR REPLACEMENT OF THE
CORD IS NECESSARY, DO NOT CONNECT THE GROUNDING WIRE TO EITHER FLAT BLADE TERMINAL. THE WIRE WITH GREENINSULATION
WITH OR WITHOUT YELLOW STRIPES IS THE GROUNDING WIRE.
THIS PRODUCT IS FOR USE ON A NOMINAL 120-VOLT CIRCUIT AND HAS A THREE-PRONG GROUNDING PLUG THAT LOOKS LIKE THE PLUG
ILLUSTRATED IN FIGURE 1. A TEMPORARY ADAPTER SIMILAR TO THE ADAPTER ILLUSTRATED IN SKETCH B AND C (SEE PAGE...

7
COMPRESSOR FEATURES
1
2
3
4
5
6
7
8
10
11
9  

COMPRESSOR FEATURES
OIL LUBRICATION: Oil lubricated direct drive pump with cast-iron cylinder for durability.
OIL FILL SIGHT GLASS: Located on the face of the crankcase, the oil fill sight glass provides a convenient way to check the oil fill level
within the pump. The oil level must be checked prior to each use to ensure proper fill level.
DO NOT OPERATE THE COMPRESSOR WITHOUT LUBRICANT, OR WITH LOW LUBRICATION LEVEL. THE MANUFACTURER IS NOT
RESPONSIBLE FOR DAMAGE CAUSED TO THE COMPRESSOR DUE TO...