Alpha Tool.Com.HK Limited Dust Bag Carriage User Manual

							 ASSEMBLY 
Insert front rail with Hose Supporter facing outwards into the T-Fittings at the front of the 
Carriage Base (Note: the front of carriage base has Swivel Wheels for easy maneuvering).  
Align clearance holes on rail with holes on T-Fittings. Insert the supplied screws on both 
ends and hand-tighten with a screw driver.
Insert back rail into the T-Fittings at the back of carriage base (Note: the back of the carriage 
base has Fixed Wheels).  Follow steps for tightening the rail as stated above. 1.
2.
 ATTACHING THE DUST BAG 
Using a fl at-head screwdriver, remove the Hose Band from the Hose Supporter.  Insert the 
Hose End into the mouth of the Dust Bag.  Place in the Hose Supporter and secure with the 
Hose Band.  Tighten to a snug fi t
.
Secure the Dust Bag to the dust bag carriage by tying each end to the Tie Support Rings 
located on the rails of the dust bag carriage.  The lower front ties can be tied to the rail of the 
carriage base as shown in the photo above. 1.
2.
NOTE:  The Dust Bag Carriage can also be used as a backpack for vertical applications and easy transport.
Front Ties
Back Rail
Fixed Wheels
T-Fitting Swivel 
WheelsFront Rail
Safe BoardTie Support 
Rings
Hose Band
Hose 
Supporter
DUST BAG CARRIAGE
Hose End
Dust Bag
To convert to a backpack, hook 
straps onto Tie Support Rings.
Carriage 
Base
ECO-CAR