Alpha Tool.Com.HK Limited Ecocaddy User Manual

Part No: ECOCAD125/ECOCAD225 Version 2
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
Alpha® Ecogrinder Caddy 
Instruction Manual
MANUAL  

2
TAblE Of CONTENTs
 
Introduction  ........................................................................\
......... 3
  About the Symbols  .............................................................. 3
  Safety Instructions ............................................................... 3
Ecogrinder Caddy  Overview  ...................................................... 5
Required Tools Needed to Assemble the Ecogrinder Caddy  ......5
Main Components for the Ecogrinder Caddy...

3
INTrODuCTION
Thank you for purchasing the Alpha® Ecogrinder Caddy.  The Ecogrinder Caddy 
is a stand-up grinder caddy for ecogrinders.  To ensure correct use, read this 
Instruction Manual and the Instruction Manual for the power tool and follow the 
operating instructions.  Keep this manual in a place where operators can\
 access 
it easily whenever necessary!
 AbOuT ThE syMbOls
According to the hazard level, all safety notes in this manual are classified into 
“DANGEr”,  “WArNING”, and “CAuTION”....

4
4. Keep children and visitors away
  Do not let visitors contact tool or extension cord.  All visitors should be kept 
away from work area.  Keep out of reach of children.
5.  Tool storage
  When not in use, tools should be stored in a secure dry location. A locked 
storage area or high shelf out of children’s reach is ideal.
6.  Dress properly
  Do not wear loose clothing or jewelry. Items such as these can be caught in 
moving parts.  rubber gloves and non-skid footwear are recommended when 
working...

5
ECOGrINDEr CADDy (ECOCAD125/ECOCAD225) OVEr VIEW
 rEquIrED TOOls NEEDED TO AssEMblE ThE ECOGrINDEr CADDy 
Ecogrinder
(sold separately)
halogen light
Dust hose (sold 
separately)
Dust Carriage 
(sold separately) Dust bag
(sold separately)
switch box
Knob bolts for
height Adjustment handle Assembly
box End Wrench
hex. Wrench spanner   

6   

7
AssEMbly Of ECOGrINDEr CADDy  (ECOCAD125) 
Install the Casters by using the supplied Wrench.
Connect the Chassis Assembly and  the h
andle holder Assembly with the supplied 
M6 bolt & Nut sets.  use the Allen Wrench and spanner to tighten.
 sTEP 1
 sTEP 2
Chassis Assembly
handle holder
Assembly
M6x80 ........................
2 pcs.
M6x16 ........................ 2 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 8 pcs.
M6 Nut ....................... 8 pcs.   

8
Assemble Motor support by using the rubber seat b, the Motor holder 
with  rubber  seat A, the bracket and the supplied Wing  bolt sets.  Attach 
the Knob bolt on the bracket.
Install Motor support Assembly to Chassis Assembly by using supplied 
Wing bolt sets.
 sTEP 3
 sTEP 4
Assembly of Ecogrinder Caddy cont’d
Knob bolt
bracket
rubber seat b
Motor holder
with rubber seat A
Wing bolt .................. 2 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 2 pcs.
M6 Nut...

9
Create the halogen light Assembly by attaching halogen  light holder to 
the halogen light with the supplied M4 bolt & Nut sets.
Install  halogen  light Assembly on Chassis Assembly by using supplied Wing  bolt 
& Nut sets. 
Note:  Always wear protective gloves when inserting or removing bulb.
 sTEP 5
 sTEP 6
Assembly of Ecogrinder Caddy cont’d   

10
Connect the handle Assembly and  handle Post by using supplied M6  bolt & Nut 
sets.
Connect switch box to the handle Assembly by using the supplied M4 screws.
 sTEP 7
 sTEP 8
Assembly of Ecogrinder Caddy cont’d
handle 
Post
handle Assembly
switch box
M6x16 ........................ 4 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 8 pcs.
M6 Nut ....................... 4 pcs.
M4x10 ........................ 4 pcs.