Home
>
Alpha Tool.Com.HK Limited
>
Ecoguard
>
Alpha Tool.Com.HK Limited Ecoguard Type G ver 3 User Manual
Alpha Tool.Com.HK Limited Ecoguard Type G ver 3 User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type G ver 3 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
INStallING thE DuSt COllECtION COVER
WaRNING!
1.
b
e sure to turn off the high-speed angle grinder and remove the plug from
the electrical outlet before attaching and installing the Dust Collection Cover.
2.
t
ake the Guard of
f from the Grinder.
3.
Make sure the Dust Collection Cover is securely attached, otherwise it m\
ay
come loose which could cause injury
.
4.
If you installed
the Dust Collection Cover to a high-speed angle grinder but
the connector is loose and cannot...](http://img.usermanuals.tech/thumb/326/5202/w64_ecoguard-type-g-ver-3-user-manual-1478735821_d-5.png "Page 6
6
INStallING thE DuSt COllECtION COVER
WaRNING!
1.
b
e sure to turn off the high-speed angle grinder and remove the plug from
the electrical outlet before attaching and installing the Dust Collection Cover.
2.
t
ake the Guard of
f from the Grinder.
3.
Make sure the Dust Collection Cover is securely attached, otherwise it m\
ay
come loose which could cause injury
.
4.
If you installed
the Dust Collection Cover to a high-speed angle grinder but
the connector is loose and cannot...")
![Page 8
8
8. tighten the Screws
(DO NO
t
forget to insert Spring W
ashers)
CautION!
the Dust Collection Cover is solely designed for use with a grinding cup \
wheel. Do
not use with any other type of blade, such as a cutof f or tip saw blades.
INStallING thE flEX® CONNECtOR
NO
t
E:
t
he
f
lex
® connector is connected directly to the Grinder, as shown in
f
igure 5.
Screw
M4x10
flex® Connector
(fig.4)
(
f
ig.5)](http://img.usermanuals.tech/thumb/326/5202/w64_ecoguard-type-g-ver-3-user-manual-1478735821_d-7.png "Page 8
8
8. tighten the Screws
(DO NO
t
forget to insert Spring W
ashers)
CautION!
the Dust Collection Cover is solely designed for use with a grinding cup \
wheel. Do
not use with any other type of blade, such as a cutof f or tip saw blades.
INStallING thE flEX® CONNECtOR
NO
t
E:
t
he
f
lex
® connector is connected directly to the Grinder, as shown in
f
igure 5.
Screw
M4x10
flex® Connector
(fig.4)
(
f
ig.5)")
11 GRINDING aPPlICatIONS SuRfaCE GRINDING Securely connect the f lexible Connector h ose to the Dust Collection Cover. turn Grinder and V acuum on to start grinding application. use the a lpha® Rubber hose C onnector as a joint between duct and flexible Connector h ose. Rubber hose Connector Duct f lexible Connector h ose Stainless Steel hose band (fig.7)
12 half CoverSub Cover Wall GRINDING 1. l oosen the screws and remove the Sub Cover and h alf Cover. 2. Switch the position of the Sub Cover and h alf Cover. 3. t ighten screws. half Cover Screw M4 x 10 Sub Cover (fig.8) ( f ig.9)
13 attaChING thE DuSt COllECtOR 1. Securely connect f lexible Connector h ose to the duct of the grinder, then turn Grinder and Vacuum Cleaner on to start grinding application. 2. u se an adapter such as the a lpha ® Rubber hose Connector as a joint between the duct and the f lexible h ose Connector. Rubber hose Connector Duct Stainless Steel h ose b and (fig.10)
15 alPha® ECOGuaRD tyPE G PaRt S l IS t DRaWING NO. PaRt NO. DESCRIP t IONQ ua N t I ty 1500032 Main Cover 1 2 500033 Sub Cover 1 3 500034 h alf Cover 1 4 500005 Rubber h ose a dapter1 5 500006 Stainless Steel h ose b and1 6 500037 Screw M4x10 4 7 500038 Set Plate 1 8 500039 h older Spring 4 9 500020 f lat h ead Screw M4x5 3 10a 500028 Connector a ssembly (Makita ® / Milwakee® / bosch®) 1 10b 500003 Connector a ssembly ( h itachi ®) 1 10c 500004 Connector a ssembly ( b osch ® / Metabo®) 1 10d 500071 Connector a ssembly ( f lex ®) 1 10e 500073 Connector a ssembly (Dewalt ®) 1 11 a 500011 Spacer- t 2.5 1 11 b 500012 Spacer- t 5.0 1 11 c 500013 Spacer- t 7.0 1 11 d 500014 Spacer- t 9.4 1 12a 500029 b ase f lange 1 13 500007 Inner f lange 1 14 500008 l ock Nut 1 15 500022 Collar M (Metabo ®) 1 16 500024 h ex. Wrench 1 17 210105 Pin Wrench 1 18 500036 Seal 1 19 500040 b land l abel 1 20 500041 b rush ( a ) 1 21 500042 b rush ( b ) 1 22 500021 taper W asher 3 OPTIONAL ACCESSORY: Shown on pg 4 500026 f lexible Connector h ose 18” 1
Copyright © 2016 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com 01/2016