Alpha Tool.Com.HK Limited Ecoguard Type M User Manual

11
3. adjust the angle of the Grinder so 
that it sits flat on the workpiece.
4.  Tightly secure the Spark Collection 
Cover flush against the grinder.
INST alla TION Of BlaDE
1. loosen the Knob Bolt to open the cover.
2.  Press down on lever to release.
3.  Slide protector cover open.
figure-9
figure-10
figure-11  

12
4. Set the blade with ring and base flange, then tighten the wheel nut.
5.    Close Main Unit and tighten Knob Bolt.
  W aRNING!
Confirm the Guard is moving smoothly
® ®figure-12
figure-13 figure-14
Securely Close  

13
CUTTING aPPlICaTION
1. Turn on the switch of the grinder
2.  Set the base on workpiece
3.  Slowly push the grinder forward and start cutting
  WaRNING!
•  DO NOT contact the rotating Blade to the workpiece directly.  (Securely set 
the Base on workpiece first)
•  Confirm the direction of cutting and Blade rotation.
•  hold the workpiece with clamping devices
figure-15   

14
DRaWING NO. PaRT NO. DESCRIPTION QUaNTITy
1 500054Main Guard-a 1
2 500055Main Guard-B 1
3 & 4 500056Protector assembly 1
5 500057Spring 1
6 500058holder Plate 1
7 500059Side Protector-a 1
8 500061Safety Guard assembly 1
9 500062Sleeve 1
10 500060Side Protector-B 1
11 500020flat head Screw M4x5 13
12 500019Washer M5 2
13 500018Spring Washer M5 1
14 500017Screw M5x10 1
15 500021Taper Washer 3
16a 500002Connector assembly (alpha
® /Makita®/Milwaukee) 1
16b 500003Connector assembly (hitachi) 1
16c...

15
 alPha® ECOGUaRD TyPE M SChEMaTIC
®
®   

Copyright © 2012 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
04/2012