Alpha Tool.Com.HK Limited Grinder HSG125 User Manual

							21
ALPHA® HIGH-SPEED ANGLE GRINDER SCHEMATIC (HSG-125) 
						

							22
ALPHA® HIGH-SPEED ANGLE GRINDER PARTS LIST (HSG-125)
DRAWING NO. PART NO. DESCRIPTION PIECES
1  130391  O Ring 16×2 1
2 130390  Lock  1
3 130389 Spring  1
4 130388 Screw M4×7  2
5 130384 Gear Box Assembly  1
6  130458  Needle Bearing HK0709F (7×11×9)  1
7  130450  Snap Ring 13.5×1.2  1
8  130426  Lock Flange  1
9  130420  Small Gear+Oil Wiper  1
11 130442 Big Gear  1
12  130386  O Ring 54×1.5  1
13 130443 Gearbox Cover  2
15 130695 Screw M4×12  4
16 130399 Washer 17.2×30×0.2  1
17  136034  Spindle ( 5/8”-11 )  1
18 130653 Protective Cover  1
19  130387  O Ring 28×2  1
20  131187  Self-tapping Screw 3.9 x 28  4
21  136038  Inside Flange (22.2mm) 1
22   Not Included Cutting Wheel  1
23  136039  Locking Flange  1
24  130434  Pin Spanner Wrench 34mm 1
25  130433  Side Handle for HSG-125  1
28 136027 Field Coil 1
29  130190  Rubber Insert Φ 5x7.5 2
30 130410 Air Bridge  1
31 130069 Fan  1
32 130418 Flange  1
33  130419 Ball Bearing 609-2RZ/C3 (9×24×7) 1 
						

							23
ALPHA® HIGH-SPEED ANGLE GRINDER PARTS LIST (HSG-125)
DRAWING NO. PART NO. DESCRIPTION PIECES
34 136044 Armature Assembly  1
36  130407  Rear Motor Housing (Blue)  1
37  130376  Insulation Disc  1
38 130657 Condenser Assembly  1
39  130381 Ball Bearing 607-2Z (7×19×6) 1
40  130375  Bearing Sleeve  1
41  130027  Self-tapping Screw 3.9 X9.5  2
42  130026  Cable Clip  1
43  130415  Switch Rod  1
44  130416  Rod Button  1
45  130417  Rod Spring  1
46 136045 Cable  1
47  130428  Cable Sleeve  1
48 130549 Rear Cover  1
49  136035  Rated Plate  1
50 136046 Carbon Brush (2 pc Set) 2
51 130413 Connector (0.045m) 2
52 130411 Brush Holder 2
53 130031 Self-tapping Screw 3.9 x 19 2
54 136036 Brand Label 1
55 135735 Switch 1
56 136040* Inside Flange (20mm) 2
57 136041* Locking Flange (20mm) 1
*Only available with the HSG-125. 
						

							24
Limited Warranty of Alpha® High-Speed Angle Grinder for the USA and Canada ONLY!
Alpha Professional Tools® warrants this product against defects in material and 
workmanship for a period of 180 days from the date of original retail purchase (proof 
of purchase required). If Alpha Professional Tools
® receives notice of such defects 
during the warranty period, our obligation assumed under this warranty is limited to 
the repair or replacement of parts, without charge. This warranty does not apply to tool 
accessories.
For Warranty Claims:  Send complete tool with all your information and details of the 
problem to your nearest Alpha
® Repair Center, transportation prepaid. Do not send tool 
accessories.
   WARRANTY
SERVICES AND WARRANTY INFORMATION
   LOANER PROGRAM
Loaner tools can be issued to temporarily replace a tool that is being returned to Alpha® 
for repair.  If more than one tool is being returned for repair, the number of loaner tools 
provided will be based on availability.  
If a loaner tool is required, contact Alpha
® Tool Department at (800) 648-7229 to receive a 
Loaner Tool Application.  A valid credit card number must be provided as a security deposit.  
The credit card will only be charged if the loaner tool is not returned to Alpha
® within 30 days.  
An authorized signature is required for the credit card being used.  A second signature is 
required as an agreement of the overall policy.         
   NEED MORE INFORMATION 
For information on Alpha Professional Tools
® complete product line, visit us on the web at 
www.alpha-tools.com 
						

							25
For more information concerning Alpha® tool repair service, please contact the 
Alpha
® regional repair centers listed below:
COMPANY HEADQUARTERS:     Alpha Professional Tools® 
     103 Bauer Drive
     Oakland, NJ 07436
Hours of Operation:       8:30 a.m. – 5:00 p.m. EST
Telephone Number:    201-337-3343
Toll-Free Number:      800-648-7229
Website:    www.alpha-tools.com
  ALPHA® TOOL REPAIR SERVICE 
						

							26
EC DECLARATION OF CONFORMITY
Name of Manufacturer:   Alpha Professional Tools®
Address of Manufacturer:  103 Bauer Drive
   Oakland, NJ 07436
   USA
Herewith declares that:
ELECTRIC HAND TOOL:    “High-Speed Angle Grinder”
  Make:   Alpha Professional Tools
®
  Type:   HSG-125/HSG-225  
-Does comply with the provisions of the Low Voltage Directive 73/23EEC amended by 
93/68 EEC and Machinery Directive 98/37/EC.
And furthermore declares that:
-The following (parts/clauses of) harmonized standards have been applied: 
EN55014-1/ + A1: 2001, EN55014-2/ + A1: 2001, EN61000-3-2:2000, EN61000-3-
3/+A1:2001.
Year of affi x CE Marking: 2008
Oakland, New Jersey USA
      
Nao Takahashi
(President) 
						

							27
PRODUCT REGISTRATION CARD
Model No.                  Serial No.
Company Name: ______________________________________________
Name: ______________________________________________________
Address: ____________________________________________________
City: _______________________State: ________Zip: ________________
Telephone: ___________________________________________________
Purchase Date: _______________________________________________
Dealer’s Name: _________________________________
Note:  Serial & Model Number must be included for proper registration.
(800) 648-7229
Mail or Fax to:
Alpha Professional Tools
®
103 Bauer Drive, Oakland, NJ 07436
Fax: 800-286-0114

Register online at: 
www.alpha-tools.com/productregistration.aspx 
						

							Copyright © 2008 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
11/2008