Alpha Tool.Com.HK Limited Polisher AWP158 User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Polisher AWP158 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
14
DANGER!
1. During operation, be sure to wear personal safety equipment.
2. If you accidentally drop the polisher, do not use the polisher until
checking that it is not cracked, deformed, or damaged. Check the
polishing disc as well.
before plugging the power supply cord into the power outlet, make sure t\
he switch is turned
off. If you plug in the power supply cord without realizing the switch is turned oN, the
polisher will start and it may cause an accident.
1. Water...](http://img.usermanuals.tech/thumb/326/5187/w64_polisher-awp158-user-manual-1478734921_d-13.png "Page 14
14
DANGER!
1. During operation, be sure to wear personal safety equipment.
2. If you accidentally drop the polisher, do not use the polisher until
checking that it is not cracked, deformed, or damaged. Check the
polishing disc as well.
before plugging the power supply cord into the power outlet, make sure t\
he switch is turned
off. If you plug in the power supply cord without realizing the switch is turned oN, the
polisher will start and it may cause an accident.
1. Water...")
![Page 16
16
2. Checking the carbon brushes.
– Carbon brushes are located inside the motor . They wear out over time
based on polisher usage.
– If a carbon brush is worn out, it may cause the motor to malfunction or \
fail.
Whenever the length of the carbon brush reaches the wear limit , replace\
it
with a new one.
• Keep the carbon brush clean, so it can slide freely in its brush holder.
CAUTION!
HoW T o RePlACe CARboN bRUsHes
When replacing used carbon brushes
with new...](http://img.usermanuals.tech/thumb/326/5187/w64_polisher-awp158-user-manual-1478734921_d-15.png "Page 16
16
2. Checking the carbon brushes.
– Carbon brushes are located inside the motor . They wear out over time
based on polisher usage.
– If a carbon brush is worn out, it may cause the motor to malfunction or \
fail.
Whenever the length of the carbon brush reaches the wear limit , replace\
it
with a new one.
• Keep the carbon brush clean, so it can slide freely in its brush holder.
CAUTION!
HoW T o RePlACe CARboN bRUsHes
When replacing used carbon brushes
with new...")
![Page 17
17
3. Cleaning the surface of the polisher.
– Do not use paint thinner, gasoline or any flammable fluids to clean the polisher. It
may cause damage to its surface. Use a dry or damp cloth with a mild de\
tergent
dissolved in water.
4. store the polisher and parts in a safe place. Do not store the polisher in following areas.
– Where children can reach the polisher.
– Where it can be easily tampered with.
– Where temperature and humidity fluctuate.
– Where the polisher is exposed to...](http://img.usermanuals.tech/thumb/326/5187/w64_polisher-awp158-user-manual-1478734921_d-16.png "Page 17
17
3. Cleaning the surface of the polisher.
– Do not use paint thinner, gasoline or any flammable fluids to clean the polisher. It
may cause damage to its surface. Use a dry or damp cloth with a mild de\
tergent
dissolved in water.
4. store the polisher and parts in a safe place. Do not store the polisher in following areas.
– Where children can reach the polisher.
– Where it can be easily tampered with.
– Where temperature and humidity fluctuate.
– Where the polisher is exposed to...")
21 DRAWING NO.PART No.DesCRIPTIoN QUANTITy 55 AWP-55 Water fitting Adapter 1 56 AWP-56 Compression Ring 2 57 AWP-57 Compression Nut 2 58 AWP-58 Hose Protector 1 60A AWP-60A field Assembly - 110V 1 60b AWP-60b field Assembly - 220V 1 61 AWP-62 Fan Guide 1 62 AWP-62 bearing Ring 1 63 AWP-63 Torsion spring 2 64 AWP-64 Handle b (side Handle) 1 65A AWP-65A Cord With GFCI - 110v 1 65b AWP-65b Cord With GFCI - 220v 1 66 AWP-66 Carbon brush (2 Pc set) 1 67 AWP-67 switch 1 68 AWP-68 strain Relief 1 70 AWP-69 flat Polishing Caster 1 71 AWP-71 Nut M4 1 72 AWP-72 screw M4x6 1 73 133229 Water Hose 8mm oDx10ft (3m) 1 74 AWP-74 Hose Coupling 1 75 AWP-75 Gasket 24x14x3 1 76 AWP-76 bMC ( blow Mold Case) for AWP-158 1 77A AWP-77A GFCI - 110v 1 77b AWP-77b GFCI - 220v 1 78 AWP-78 Wrench 14mm 1 AlPHA® AWP-158 P ARTs lIsT
22
eC DeClARATIoN of CoNfoRMITy
Name of Manufacturer: Alpha Professional Tools®
Address of Manufacturer: 103 bauer Drive
oakland, NJ 07436
UsA
Herewith declares that:
ElECTRIC HAND TOOl: “Alpha
® Wet Polisher”
Make: Alpha Professional Tools
®
Type: AWP-158/AWP-214/AWP-21C
-Does comply with the provisions of the Directive 98/37eC, 89/336eeC, 73/23eeC
including the subsequent amendments.
And furthermore declares that:
-The following (parts/clauses of) harmonized standards have been appli\
ed:
eN292-1, eN292-2, eN60204-1, eN50 144, eN55 104, eN50 014, eN60 555 and
HD400.
Year of affix CE Marking: 2002
oakland, New Jersey UsA
Nao Takahashi (President)
May / 2002
Assembled in China last revised: 05/2005
Limited Warranty of Alpha® Wet Polisher for the UsA and Canada onLY!
Alpha Professional Tools® warrants this product against defects in material and
workmanship for a period of 180 days from the date of original retail purchase (proof
of purchase required). If Alpha Professional Tools
® receives notice of such defects
during the warranty period, our obligation assumed under this warranty is limited to
the repair or replacement of parts, without charge. This warranty does not apply to
tool accessories.
For Warranty Claims: Send complete tool with all your information and details of the
problem to the address printed on the cover of this manual, transportation prepaid.
Do not send tool accessories.
2323 PRODUCT REGISTRATION CARD Model No. serial No. Company Name: ______________________________________________ Name: ______________________________________________________ Address: ____________________________________________________ City: _______________________state: ________Zip: ________________ Telephone: ___________________________________________________ Purchase Date: _______________________________________________ Dealer’s Name: _________________________________ Note: serial & Model Number must be included for proper registration. (800) 648-7229 Mail or Fax to: Alpha Professional Tools ® 103 Bauer Drive, Oakland, NJ 07436 Fax: 800-286-0114 Register online at: www.alpha-tools.com/productregistration.aspx
Copyright © 2012 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com 9/11/12