Amcrest IP3M-941 Dual Band PT Camera User Manual

11 
 
3 Connection & Installation 
This section provides information about the connection and installation of the Amcrest ProHD network camera. 
3. 1  Connectio n  Gui de 
The camera initially should be connected via the following method: 
 
In addition to connecting the camera to a computer, the camera should also be connected to a power source, by 
connecting the included power cable to both a power outlet, and the camera. 
3. 2  Installatio n  Gui de 
The camera has a standard camera tripod screw hole...

12 
 
4 Camera Access Setup 
This section of the guide will provide the user with information on how to setup access to the camera through any 
of the following methods. 
4. 1 D efa ult U se rna me a nd  Pas sw ord 
To login to the system for the first time, use one of the following default username/password combinations. Once 
you’ve successfully logged in, it is highly recommended to change the password for security reasons. 
Username: admin  
Password: admin 
Note: Logging in for the first time will...

13 
 
4. 2 Ca me ra  setup  me thods 
To make your experience with the Amcrest WiFi camera easy and simple, weve provided multiple ways to set up, 
view, and operate your camera depending on your needs. Please follow the instructions on this page to set up your 
camera in the way that works best for you. 
4.2.1 Setting up your camera for the first time 
If setting up your camera for the first time, please follow the instructions as outlined in section 4.3.1. Using the 
Amcrest View app on your smartphone...

14 
 
4. 3 A mcres t Vi e w A pp S etup 
Amcrest IP3M-941 cameras enable access through the use of the Amcrest View app on either iOS or Android 
mobile operating systems. There are two versions of the app, Amcrest View Lite, and Amcrest View Pro. Amcrest 
View (Lite or Pro) on the App Store or Play Store. The Pro version contains features such as push notifications, 
sharing video and image files, exporting video in MP4 format, and exporting image files to your phone. The 
Amcrest Pro version of the app...

15 
 
 
 
 
  
3. Tap the Add Device button. 4. Tap WiFi Camera. 
 
  
 
 
 
 
Note: Move the 
camera or the 
phone to ensure 
that the entire QR 
code is visible and 
focused in the 
frame. In case the 
QR code cannot be 
scanned, please 
tap Enter S/N 
Manually to enter 
in the camera’s 
serial number. 
5. Tap WiFi Configuration Setup. 6. Scan the QR code from the sticker on your 
camera.  
  

16 
 
 
 
 
 
 
 
 
 
 
Note: The default 
username is 
admin and the 
default password 
is admin. 
7. Double check to ensure that your S/N (Serial 
Number) is entered correctly, then tap Next. 
8. Give your camera a name, then enter in the 
camera’s username and password. Once 
you’ve filled out all of the fields, tap Next. 
 
 
 
 
 
 
Note: Most 
Amcrest cameras 
can only connect to 
2.4 GHz WiFi 
networks, so please 
ensure that your 
phone is connected 
to a compatible 
network. 
Otherwise, perform...

17 
 
 
 
 
 
 
 
 
Note: Once the 
password is 
changed here, it 
will take effect 
immediately. If 
you forget your 
password, you can 
always hard reset 
the camera using 
the steps detailed 
in the FAQs 
section of this 
guide. 
 
 
 
 
 
 
 
Note: To connect 
your camera to 
additional 
smartphones and 
tablets, please use 
the P2P Setup 
method as outlined 
on section 4.3.4. 
 
11. To ensure the security of your camera, you 
will be asked to change the password for your 
camera’s default username...

18 
 
 
4.3.2 Ethernet WiFi Setup 
The Ethernet WiFi Setup process is a useful and stable setup method that uses a temporary Ethernet (hardwired) 
connection to your camera. By the end of the process, your camera will be working on WiFi and will not need a 
cable. 
If the WiFi Configuration setup method (see section 4.3.1 WiFi Configuration setup) does not work, this is a great 
“backup” method. Alternatively, this method can also be used as an initial setup method, if preferred. It will take a 
few more...

19 
 
  
4. Tap WiFi Camera.  5. Tap Ethernet WiFi Setup. 
  6. Plug your camera into your router via an Ethernet 
cable. Don’t worry, once the camera is set up, the 
camera can be unplugged and moved to a 
different location. Tap Next when finished.  
7. Ensure your mobile phone is connected to the 
WiFi network that you will be connecting your 
camera to, then tap Next. 
 
  

20 
 
 
 
 
 
Note: Move the 
camera or the 
phone to ensure 
that the entire QR 
code is visible and 
focused in the 
frame. In case the 
QR code cannot 
be scanned, 
please tap Enter 
S/N Manually to 
enter in the 
camera’s serial 
number. 
 
8. Scan the QR code [QR code icon] from the sticker 
on your camera.  
9. Double check to ensure that your S/N (Serial 
Number) is entered correctly. Then, tap Next. 
 
 
 
 
 
 
 
 
Note: The default 
username is admin 
and the default 
password is admin. 
 
10....