American Audio CDMp3 PLAYER UCD200 User Manual

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 11
 GENERAL FUNCTIONS AND CONTROLS -  PLAYER UNIT 
Figure 6
Figure 5
3031293332
PLAYER UNIT - FACE (FIGURE 5)
23. DRIVE 1 TRANSPORT TRA y -  This tray is used to load and unload a compact disc into the drive 
1 mechanism. The tray is opened and closed by pressing the DRIVE 1 OPEN/CLOSE  BUTTON (25). 
Never attempt to force the transport tray open or close when the power is turned off.
24. USB PORT - This is the USB port...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 12
 GENERAL FUNCTIONS AND CONTROLS -  PLAYER UNIT 
30. REMOTE JACK - Connect the supplied 8 pin cable from this jack to the remote control's connec-
tor. This will allow you to control the player functions with the remote unit.
31.  USB  PORT  - This  is  the  USB  port  where  you  can  insert  a  USB  stick,  USB  SD  Card  reader,  or 
compatiable external hard drive for playback 
32. DRIVE 2 AUDIO OUT R & L - These...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 13
 LIqUID CRYSTAL  DISPLAY  (LCD)
LCD DISPLAY (FIGURE 7)
34. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time 
a new CUE POINT is set.
35. FOLDER DISPLA y - This indicates which folder you are in. 
36.  TIME BAR INDICATOR  - This  bar  visually  details  the  time  defined  in  the TIME  METER  (37). 
As  with  the TIME  METER (37),  this  bar  is  also  dependent  on  the...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 14
play all tracks in a selected folder until the mode is deactivated. To activate REPEAT mode, press the 
FOLDER BUTTON (10 ) for at least 2 seconds to activate and deactivate. 
46. SINGLE  INDICATOR - This indicates the unit is in single play mode, the unit will play a single track 
and return to CUE mode. If the sINGLE indicator is not displayed the unit is in continuous mode.  
47.  TRACK  INDICATOR - This double digit...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 15
INTERNAL MENU
Hold TIME BUTTON for 3 seconds to enter the internal menu. Turn TRACK KNOB to scroll through the differ-
ent menus and press the TRACK KNOB to enter the corresponding submenu. Turn TRACK KNOB to change 
the submenus and press TIME BUTTON to memorize your settings in any operating mode and exit the menu.
1. Playlist – Normal / Title/ Artist / Album/ Genre
Normally the unit will read your USB devices in order...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 16
 BASIC OPERATIONS
Figure 9
Figure 8
3 in. / 8cm disc
5 in. / 12cm disc1. OPENING AND ClOSING  THE DISC TRAy/lOADING DISCS
This  is  an  electronic  operation  and  can  only  work  when  the  power  is  on.  Press  the 
OPEN/CLOSE BUTTON (1) to open or close the disc tray. Pressing the PLAy/PAUSE 
BUTTON (16), will also automatically close the tray if it is open and immediately cue 
any CD that is in it. If the transport...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 17
 BASIC OPERATIONS
to stop playback:
1)  Press the PLAy/PAUSE  BUTTON (16) during playback to pause at that point. 
2)  Press the CUE BUTTON (17) during playback to return the track to it’s last cue point.  
7. SETTING  A CUE  POINT
”Cueing” is the action of preparing for playback. The unit is designed to automatically cue at the first audible 
signal on the first track of a disc when a disc is inserted. If a track is...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 18
8. CHANGING THE TIME  DISPlA y (37)/TIME  BAR (36):
The time may be displayed in three different modes; Elapsed, Remain, and Total Remain. During normal play-
back, pressing the TIME BUTTON (3), will change the time display information (37) in the LCD (4). The following 
is a breakdown of the time settings and their definitions:    
1)   TOTAL  REMAIN - This details the time in the Lcd as the current CD's total...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 19
Holding  down  or  tapping  on  the (+)  PITCH 
BEND BUTTON (13) will  provide  a  speed 
bump in the playback pitch.
 BASIC OPERATIONS (CONT)
10. PITCH BEND:
This  function  will  momentarily  increase  or  decrease  a  tracks  playback  speed.  There  are  two  ways  to  operate 
this  function  with  the  (-)  &  (+)  PITCH BUTTONS  (13)  or  with  the JOG  wHEEL  (19).  The  maximum  pitch  bend 
percentage  allowed...

©American Audio®   -   www.americanaudio.us   -   UCD-200 Instruction Manual Page 20
 BASIC OPERATIONS (CONT)
2)  Press  the IN  BUTTON (11).  This  will  set  the 
starting point of the SEAMLESS LOOP (figure 17). 
The IN BUTTON LED will blink. 
1)  Press PLAy/PAUSE  BUTTON  (16) to  activate 
playback mode.
13. CREATING  AND PLAYING  A LOOP  
A loop is a sound loop that plays continuously.  you can use this loop to create dramatic effect in your mixing. 
This loop has no time limit and you could...