American Audio Digital Producer VMS41 User Manual
Have a look at the manual American Audio Digital Producer VMS41 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 120 American Audio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
LINE/PHONO SELECTOR SWITCH is in the “PHONO” position. CD players, Mp3 players,
and other line level instruments may only be connected to these jacks as\
long as the
LINE LEVEL SELECTOR SWITCH is in the “LINE” position.
MIDILOG 3: Phono/line level RCA input use to connect turntables, CD players, Mp3 play-
ers, or other line level sources. The type of input must directly reflect the selected mode of
the LINE/PHONO SELECTOR SWITCH. Turntables equipped with MM pickup cartridge (All
DJ...](http://img.usermanuals.tech/thumb/368/5607/w64_digital-producer-vms41-user-manual-1478771461_d-15.png "Page 16
LINE/PHONO SELECTOR SWITCH is in the “PHONO” position. CD players, Mp3 players,
and other line level instruments may only be connected to these jacks as\
long as the
LINE LEVEL SELECTOR SWITCH is in the “LINE” position.
MIDILOG 3: Phono/line level RCA input use to connect turntables, CD players, Mp3 play-
ers, or other line level sources. The type of input must directly reflect the selected mode of
the LINE/PHONO SELECTOR SWITCH. Turntables equipped with MM pickup cartridge (All
DJ...")
![Page 18
©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 18
AUDIO INTERFACE MODE
8 Out Mode: This mode supports 4 USB audio inputs. Perfect for using it \
with software that has 3-4
decks. This will also route your master output via USB for recording USB audio or analog inputs.
MIDI LATENCY MODES
There are two MIDI Latency modes; Normal mode and Turbo mode. Normal mode has MIDI Latency
of 10 milliseconds, this is the default mode. Turbo mode has a MIDI latency of 1 millisecond....](http://img.usermanuals.tech/thumb/368/5607/w64_digital-producer-vms41-user-manual-1478771461_d-17.png "Page 18
©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 18
AUDIO INTERFACE MODE
8 Out Mode: This mode supports 4 USB audio inputs. Perfect for using it \
with software that has 3-4
decks. This will also route your master output via USB for recording USB audio or analog inputs.
MIDI LATENCY MODES
There are two MIDI Latency modes; Normal mode and Turbo mode. Normal mode has MIDI Latency
of 10 milliseconds, this is the default mode. Turbo mode has a MIDI latency of 1 millisecond....")
![Page 20
EQ MODES
Post EQ is for users who prefer using the EQ from their software. To toggle the post EQ mode
on and off; before powering up the VMS4.1, press and hold the PFL CUE (4) on the 4th chan-
nel MIDILOG and then power "ON" the unit. Release the button, your computer may reinstall the
VMS4.1 as a new device, please allow 10-20 seconds for the change to tak\
e place. Confirm the EQ
change by checking the ASIO Driver configuration. The first number in the sequence will be a "1" in
this...](http://img.usermanuals.tech/thumb/368/5607/w64_digital-producer-vms41-user-manual-1478771461_d-19.png "Page 20
EQ MODES
Post EQ is for users who prefer using the EQ from their software. To toggle the post EQ mode
on and off; before powering up the VMS4.1, press and hold the PFL CUE (4) on the 4th chan-
nel MIDILOG and then power \"ON\" the unit. Release the button, your computer may reinstall the
VMS4.1 as a new device, please allow 10-20 seconds for the change to tak\
e place. Confirm the EQ
change by checking the ASIO Driver configuration. The first number in the sequence will be a \"1\" in
this...")
![Page 25
Due to fog residue, smoke, and dust, cleaning the mixer should be carried out period\
ically to residue
build up.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casin\
g.
2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch.
This will reduce small particle built up that can effect the proper operation of the mixer.
3. Cleaning should be carried out every 30-60 days to prevent heavy built up.
4. Always be sure to dry all...](http://img.usermanuals.tech/thumb/368/5607/w64_digital-producer-vms41-user-manual-1478771461_d-24.png "Page 25
Due to fog residue, smoke, and dust, cleaning the mixer should be carried out period\
ically to residue
build up.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casin\
g.
2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch.
This will reduce small particle built up that can effect the proper operation of the mixer.
3. Cleaning should be carried out every 30-60 days to prevent heavy built up.
4. Always be sure to dry all...")
![Page 26
WARRANTY INFORMATION: The VMS4.1 carries a ONE year (365 days) limited warranty. This
warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase
and warranty. All returned service items whether under warranty or not, must be frei\
ght pre-paid and
accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy
of your proof of purchase invoice. Please contact American Audio® customer support at (800) 322-
6337 for a...](http://img.usermanuals.tech/thumb/368/5607/w64_digital-producer-vms41-user-manual-1478771461_d-25.png "Page 26
WARRANTY INFORMATION: The VMS4.1 carries a ONE year (365 days) limited warranty. This
warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase
and warranty. All returned service items whether under warranty or not, must be frei\
ght pre-paid and
accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy
of your proof of purchase invoice. Please contact American Audio® customer support at (800) 322-
6337 for a...")
©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 21 FIRMWARE UPDATE The included version of Virtual DJ includes a Firmware update utility. It is necessary to install this. To update your VMS4.1: 1. Please check your computer audio setting and ensure that the VMS4.1 is not set as a default playback, playback recording, or MIDI device. This will interfere with the update and software appli- cations. 2. Click the start menu > All Programs > Virtual DJ > FIRMWARE Update. 3. Select the VMS4.1 or USB Audio Device (Windows XP). Load the update\ file by clicking browse and going to the file location.
©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 22 FIRMWARE UPDATE 5. Unplug the USB and shut down the VMS4.1. You may receive some Error windows like you see below. Select proper device in device select window. Please check your computer audio setting and ensure that the VMS4.1 is not set as a default playback, play- back recording, or MIDI device. This will interfere with the update and software applications. Also, make sure that any software that uses MIDI or the Audio interface is closed. 4. Wait untill the bar is filled in completely and "Upgrade Complete" is displayed.
COMPUTER CONNECTION 1. CONNECTING THE VMS4.1 TO YOUR PC Connect the VMS4.1 to your PC by using the USB ports located on the rear of the VMS4.1 and your PC. Connect the supplied USB cable to the USB port on the rear of the VMS4.1, and the other end connects to the USB port on your computer. NOTE: Before connecting your VMS4.1 to your computer or laptop, we highly recommend that you install the provided software. The Virtual DJ version included with this product is specifically tailored to work with the VMS4.1 with no setup required. The setup of other non-factory authorized drivers and software is far more complex and in some instances not as reliable. Speaker Cables American Audio V4000™ ©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 23
SET UP ©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 24
Due to fog residue, smoke, and dust, cleaning the mixer should be carried out period\ ically to residue build up. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casin\ g. 2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch. This will reduce small particle built up that can effect the proper operation of the mixer. 3. Cleaning should be carried out every 30-60 days to prevent heavy built up. 4. Always be sure to dry all parts completely before plugging the mixer in. Cleaning frequency depends on the environment in which the mixer operates (i.e. smoke, fog residue, dust, dew). The crossfader is “Hot Swapable” which means it may be replaced at any time, even when power is applied. Replace with American Audio VMS4.1 crossfader (part# Z-FF-8). If you wish to upgrade to an Innofader, please order the Innofader model which comes with the VMS4.1 plade cover to protect the Innofader from damage during handling of the VMS4.1. If you upgrade to the Innofader\ , please make sure the power is off before upgrading to limit the chance of damage to the Innofader and/or VMS4.1 during installation. Replacing with any other model fader may ser\ iously damage your mixer. Replacing the Crossfader: 1. Disconnect the mixers main power supply 2. Using a Phillips screw driver, unscrew the two outside screws on each side that hold the cross fader assembly in place. 3. Gently remove the crossfader assembly from its seated position. You may need to wiggle the crossfader slightly to remove it. 4. After removing the crossfader assembly, disconnect the ribbon cable that attaches the cross fader to the PC board. Grasp the crossfader by its base and pull the ribbon cable by its con nector not the actual cables. The connector is designed to only fit one way , so don’t worry about the connectors orientation. 5. Unscrew the two inner screws that connect the crossfader to the crossfader plate. 6. Connect the new crossfader to the ribbon cable and replace in reverse order. CROSSFADER REPLACEMENT CLEANING ©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 25
WARRANTY INFORMATION: The VMS4.1 carries a ONE year (365 days) limited warranty. This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase and warranty. All returned service items whether under warranty or not, must be frei\ ght pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American Audio® customer support at (800) 322- 6337 for a R.A. number. All package not displaying a R.A. number on the outside of the package \ will be returned to the shipper. 1-YEAR LIMITED WARRANTY A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Y\ ear (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American Audio® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American Audio® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No acc\ essories should be shipped with the product. If any accessories are shipped with the product, American Audio® shall have no liability whatsoever for loss of or damage to any such acc\ essories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio® factory unless prior written authorization was issued to purchaser by American Audio®; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include m\ aintenance, cleaning or peri- odic check-up. During the period specified above, American Audio® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American Audio® under this warranty shall be lim- ited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Ameri- can Audio®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American Audio® reserves the right to make changes in design and/or improvements upon its prod- ucts without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warran- ties made by American Audio® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replace- ment as is expressly provided above; and under no circumstances shall American Audio® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, th\ is product. G. This warranty is the only written warranty applicable to American Au\ dio® Products and supersedes all prior warranties and written descriptions of warranty terms and cond\ itions heretofore published. WARRANTY ©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 26
GENERAL Model: American Audio® VMS4.1 - PC Media Controller
Dimensions: 482(L) x 325(W) x 40(H) mm
19"(L) x 12.75(W) x 1.5"(H)
Installation: Place on flat surface or mount in flat case
Weight: 13 Lbs. / 6 Kgs
Power supply: DC 5V
Single Voltage:
AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
Power consumption: 5W
Environmental conditions: Operational temperature: 5 to 35˚C (41 to 95˚F)
Operational humidity: 25 to 85% RH (no condensation)
Storage temperature: -10 to 60˚C (14 to 140˚F)
Accessories: USB 2.0 Cable Switching Adaptor
ITEM NORMAL LIMIT CONDITION
Output level: Gain Max, EQ Flat - 1.6V +/-0.5dB 1.6V +/-1dB
Line & Mixed Out: 2.1V +/-0.5dB 2V +/-1dB 1KHz, 0dB
Phones: 1.2V 1V 1KHz, -20dB
Channel Balance: (From 0 to -40db For Mixed Out) -
Line: Within 0.5dB Within 1dB 1KHz, 0dB
Mixed Out: Within 1dB Within 3dB 1KHz, 0dB
L/R Separation -
Line: 97dB 85dB 1KHz, 0dB
Mixed Out: 95dB 85dB 1KHz, 0dB (Max. Out, EQ Flat)
T.H.D. + NOISE -
Line: 0.025% 0.03% 1KHz, 0dB
Mixed Out: 0.025% 0.03% 1KHz, 0dB (Max. Out, EQ Flat)
Phones: 0.045% 0.05% 1KHz, 0dB (1V Output)
S/N Ratio -
Line: 97dB 85dB 1KHz, 0dB
Mixed Out: 97dB 85dB 1KHz, 0dB (Max. Out, EQ Flat)
Dynamic Range (Max. Output, EQ Flat) -
Line: 96dB 85dB 1KHz,-60dB
Mixed Out: 94dB 85dB 1KHz,-60dB
Frequency Response -
Line: 17-16KHz +/-0.3dB 17-16KHz +/-1dB
Mixed Out: 17-16KHz +/-0.3dB 17-16KHz +/-1dB
Phones Max. Output: 1.6V 1.4V 1KHz, 0dB, THD=1%
NOTES: Specifications and improvements in the design of this unit and this manual are subject to
change without any prior written notice.
CHECK THE AMERICAN AUDIO WEBSITE FOR DOWNLOADABLE USER SOFTWARE
UPDATES.
SPECIFICATIONS
©American Audio® - www.americanaudio.us - VMS4.1 Instruction Manual Page 27
©American DJ Supply American DJ World Headquarters: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-725-6100 Web: www.americandj.com / E-mail: [email protected] American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands [email protected] / www.americandj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99